Re: [PATCH 1/2] dt-bindings: remoteproc: add AMD MicroBlaze binding

[Krzysztof Kozlowski]

On 14/04/2026 18:15, Ben Levinsky wrote:

A nit, subject: drop second/last, redundant "binding". The "dt-bindings"
prefix is already stating that these are bindings.
See also:
https://elixir.bootlin.com/linux/v6.17-rc3/source/Documentation/devicetree/bindings/submitting-patches.rst#L18

> +---
> +$id: http://devicetree.org/schemas/remoteproc/amd,microblaze.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: AMD MicroBlaze remote processor
> +
> +maintainers:
> +  - Ben Levinsky <ben.levinsky@xxxxxxx>
> +
> +description:
> +  MicroBlaze remote processor controlled by Linux through the remoteproc
> +  framework.

Describe hardware, not Linux frameworks. IOW, Linux framework is here
irrelevant.

> +
> +  The executable firmware memory window is described in the
> +  MicroBlaze-local address space by the node's reg property and translated
> +  to the system physical address space with standard devicetree address
> +  translation provided by the parent bus node's ranges property.
> +
> +properties:
> +  $nodename:
> +    pattern: "^remoteproc@[0-9a-f]+$"
> +
> +  compatible:
> +    const: amd,microblaze

microblaze is architecture, so this feels way too generic. You need SoC
specific compatibles and I suggest do not reference architecture, but
name or the function of the processor, if there are such.


> +
> +  reg:
> +    maxItems: 1
> +    description:
> +      MicroBlaze-local address and size of the executable firmware memory
> +      window.
> +
> +  firmware-name:
> +    maxItems: 1
> +
> +  reset-gpios:
> +    maxItems: 1
> +
> +required:
> +  - compatible
> +  - reg
> +  - reset-gpios
> +
> +additionalProperties: false
> +
> +examples:
> +  - |
> +    #include <dt-bindings/gpio/gpio.h>
> +
> +    / {
> +      #address-cells = <2>;
> +      #size-cells = <2>;
> +
> +      bus@b0000000 {
> +        compatible = "simple-pm-bus";
> +        #address-cells = <1>;
> +        #size-cells = <1>;
> +        ranges = <0x0 0x0 0xb0000000 0x40000>;
> +

Drop all above.

> +        remoteproc@0 {
> +          compatible = "amd,microblaze";
> +          reg = <0x0 0x40000>;
> +          reset-gpios = <&mbv_reset_gpio 0 GPIO_ACTIVE_LOW>;
> +        };
> +      };
> +    };


Best regards,
Krzysztof