[PATCH] gpio: aspeed: fix AST2700 debounce selector bit definitions

[Billy Tsai]

The AST2700 datasheet defines reg_debounce_sel1 as the low bit and
reg_debounce_sel2 as the high bit. The current driver uses the AST2600
mapping instead, where sel1 is the high bit and sel2 is the low bit.

As a result, the debounce selector bits are programmed in reverse on
AST2700. Swap the G7 sel1/sel2 bit definitions so the driver matches the
hardware definition.

Fixes: b2e861bd1eaf ("gpio: aspeed: Support G7 Aspeed gpio controller")
Signed-off-by: Billy Tsai <billy_tsai@xxxxxxxxxxxxxx>
---
 drivers/gpio/gpio-aspeed.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/gpio/gpio-aspeed.c b/drivers/gpio/gpio-aspeed.c
index 9115e56a1626..98b5bfbc04a3 100644
--- a/drivers/gpio/gpio-aspeed.c
+++ b/drivers/gpio/gpio-aspeed.c
@@ -42,8 +42,8 @@
 #define GPIO_G7_CTRL_IRQ_TYPE1 BIT(4)
 #define GPIO_G7_CTRL_IRQ_TYPE2 BIT(5)
 #define GPIO_G7_CTRL_RST_TOLERANCE BIT(6)
-#define GPIO_G7_CTRL_DEBOUNCE_SEL1 BIT(7)
-#define GPIO_G7_CTRL_DEBOUNCE_SEL2 BIT(8)
+#define GPIO_G7_CTRL_DEBOUNCE_SEL2 BIT(7)
+#define GPIO_G7_CTRL_DEBOUNCE_SEL1 BIT(8)
 #define GPIO_G7_CTRL_INPUT_MASK BIT(9)
 #define GPIO_G7_CTRL_IRQ_STS BIT(12)
 #define GPIO_G7_CTRL_IN_DATA BIT(13)

---
base-commit: 6de23f81a5e08be8fbf5e8d7e9febc72a5b5f27f
change-id: 20260415-gpio-fix-1745583ecf06

Best regards,
-- 
Billy Tsai <billy_tsai@xxxxxxxxxxxxxx>