[PATCH 2/2] arm64: dts: qcom: sc8280xp: gaokun3: correct EC interrupt pin

[Pengyu Luo]

Unlike other sc8280xp platforms, on this platform, in dsdt, gpio 0x2c0
is not mapped to gpio107, it is gpio103, so fix it. I found this until
I did a trigger track, irq is regularly triggerd every several
millisecs. In the past, since here gpio107 was low forever, ec irq
would keep to be triggered and polling the event every several
millisecs.

About how to get the map, please check openbsd driver for it
https://github.com/openbsd/src/blob/master/sys/dev/acpi/qcgpio.c

Signed-off-by: Pengyu Luo <mitltlatltl@xxxxxxxxx>
---
 arch/arm64/boot/dts/qcom/sc8280xp-huawei-gaokun3.dts | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm64/boot/dts/qcom/sc8280xp-huawei-gaokun3.dts b/arch/arm64/boot/dts/qcom/sc8280xp-huawei-gaokun3.dts
index 9819454abe13..d9d55241336e 100644
--- a/arch/arm64/boot/dts/qcom/sc8280xp-huawei-gaokun3.dts
+++ b/arch/arm64/boot/dts/qcom/sc8280xp-huawei-gaokun3.dts
@@ -637,7 +637,7 @@ embedded-controller@38 {
 		compatible = "huawei,gaokun3-ec";
 		reg = <0x38>;
 
-		interrupts-extended = <&tlmm 107 IRQ_TYPE_LEVEL_LOW>;
+		interrupts-extended = <&tlmm 103 IRQ_TYPE_LEVEL_LOW>;
 
 		#address-cells = <1>;
 		#size-cells = <0>;
-- 
2.53.0