Re: Pressing the power button causes the device to freeze completely

[Evgeny Sagatov]

dmesg | grep "Fast frequency"
Nothing was displayed.

The PC froze when I pressed the power button. Nothing in the log.

I applied this patch after deleting all the previous ones. Is this correct?

I received this message when applying a patch. Perhaps we have
different versions of the source code? I'm using 7.0.0.
patching file drivers/acpi/acpica/evevent.c
patching file drivers/cpufreq/acpi-cpufreq.c
Hunk #1 succeeded at 895 (offset -17 lines).
patching file drivers/cpufreq/cpufreq.c

пт, 24 апр. 2026 г. в 22:45, Rafael J. Wysocki <rafael@xxxxxxxxxx>:
>
> On Friday, April 24, 2026 7:06:50 PM CEST Evgeny Sagatov wrote:
> > dmesg | grep "Fast frequency"
> > [    8.903099] cpufreq: CPU0: Fast frequency switching enabled
> > [    8.903181] cpufreq: CPU1: Fast frequency switching enabled
> > [    8.903247] cpufreq: CPU2: Fast frequency switching enabled
> > [    8.903316] cpufreq: CPU3: Fast frequency switching enabled
>
> If it is enabled, let's try to disable it and see what happens.
>
> > When I pressed the power button, the PC froze. Nothing in the log.
>
> Below is an updated version of the previous patch which additionally
> disables fast frequency switching in the ACPI cpufreq driver that is
> in use on your system.
>
> The "Fast frequency switching enabled" messages should not be there
> any more in the log with this patch applied (please verify) and
> please check if pressing the power button will still lock up the
> system.
>
> ---
>  drivers/acpi/acpica/evevent.c  |    5 +++++
>  drivers/cpufreq/acpi-cpufreq.c |    3 +--
>  drivers/cpufreq/cpufreq.c      |    1 +
>  3 files changed, 7 insertions(+), 2 deletions(-)
>
> --- a/drivers/acpi/acpica/evevent.c
> +++ b/drivers/acpi/acpica/evevent.c
> @@ -243,6 +243,11 @@ static u32 acpi_ev_fixed_event_dispatch(
>         (void)acpi_write_bit_register(acpi_gbl_fixed_event_info[event].
>                                       status_register_id, ACPI_CLEAR_STATUS);
>
> +       if (event == ACPI_EVENT_POWER_BUTTON) {
> +               pr_info("ACPI power button event\n");
> +               return (ACPI_INTERRUPT_HANDLED);
> +       }
> +
>         /*
>          * Make sure that a handler exists. If not, report an error
>          * and disable the event to prevent further interrupts.
> --- a/drivers/cpufreq/acpi-cpufreq.c
> +++ b/drivers/cpufreq/acpi-cpufreq.c
> @@ -912,8 +912,7 @@ static int acpi_cpufreq_cpu_init(struct
>          */
>         data->resume = 1;
>
> -       policy->fast_switch_possible = !acpi_pstate_strict &&
> -               !(policy_is_shared(policy) && policy->shared_type != CPUFREQ_SHARED_TYPE_ANY);
> +       policy->fast_switch_possible = false;
>
>         if (perf->states[0].core_frequency * 1000 != freq_table[0].frequency)
>                 pr_warn(FW_WARN "P-state 0 is not max freq\n");
> --- a/drivers/cpufreq/cpufreq.c
> +++ b/drivers/cpufreq/cpufreq.c
> @@ -473,6 +473,7 @@ void cpufreq_enable_fast_switch(struct c
>         if (cpufreq_fast_switch_count >= 0) {
>                 cpufreq_fast_switch_count++;
>                 policy->fast_switch_enabled = true;
> +               pr_info("CPU%u: Fast frequency switching enabled\n", policy->cpu);
>         } else {
>                 pr_warn("CPU%u: Fast frequency switching not enabled\n",
>                         policy->cpu);
>
>
>