[PATCH v6 3/5] platform/x86: int3472: tps68470: add board data for Dell Latitude 5285
From: Thierry Chatard
Date: Sat Apr 25 2026 - 12:32:27 EST
The Dell Latitude 5285 2-in-1 has two cameras connected through a TPS68470
PMIC/clock/GPIO hub:
Front: OV5670 (ACPI INT3479) on I2C4
Back: OV8858 (ACPI INT3477) on I2C2, daisy-chained behind TPS68470
S_I2C port (controlled by reg 0x43 S_I2C_CTL)
GPIO mapping (TPS68470):
INT3479 (OV5670): GPIO3 = reset, GPIO4 = powerdown (both active-low)
INT3477 (OV8858): GPIO9 = s_resetn, GPIO7 = s_enable (both active-low)
GPIO9 and GPIO7 are the TPS68470 secondary-port GPIOs (SGPO reg 0x22
bits 2 and 0), not regular GPDO outputs.
Regulator mapping:
CORE -> dvdd / INT3477
ANA -> avdd / INT3477
VIO -> generic (kept always_on; no direct consumers)
VSIO -> dovdd / INT3477: enabling VSIO sets S_I2C_CTL (reg 0x43),
opening the I2C passthrough to OV8858; the ov8858 driver
enables dovdd at probe time, which naturally activates the
passthrough before any I2C transaction to the sensor.
AUX1 -> dvdd / INT3479
AUX2 -> dovdd / INT3479
A static clock consumer list is provided for both sensors (INT3477 and
INT3479) to work around the broken ACPI _DEP on INT3479 described in the
previous patch.
Signed-off-by: Thierry Chatard <tchatard@xxxxxxxxx>
---
.../x86/intel/int3472/tps68470_board_data.c | 170 +++++++++++++++++-
1 file changed, 167 insertions(+), 3 deletions(-)
diff --git a/drivers/platform/x86/intel/int3472/tps68470_board_data.c b/drivers/platform/x86/intel/int3472/tps68470_board_data.c
index 71357a036..6961e2926 100644
--- a/drivers/platform/x86/intel/int3472/tps68470_board_data.c
+++ b/drivers/platform/x86/intel/int3472/tps68470_board_data.c
@@ -74,8 +74,12 @@ static const struct regulator_init_data surface_go_tps68470_vcm_reg_init_data =
.consumer_supplies = int347a_vcm_consumer_supplies,
};
-/* Ensure the always-on VIO regulator has the same voltage as VSIO */
-static const struct regulator_init_data surface_go_tps68470_vio_reg_init_data = {
+/*
+ * Keep VIO always_on. Its voltage must exactly match VSIO on any board
+ * using the TPS68470 I2C pass-through, and must never have direct consumers
+ * (all I2C-path outputs are gated through VSIO).
+ */
+static const struct regulator_init_data generic_tps68470_vio_reg_init_data = {
.constraints = {
.min_uV = 1800600,
.max_uV = 1800600,
@@ -122,7 +126,7 @@ static const struct tps68470_regulator_platform_data surface_go_tps68470_pdata =
[TPS68470_CORE] = &surface_go_tps68470_core_reg_init_data,
[TPS68470_ANA] = &surface_go_tps68470_ana_reg_init_data,
[TPS68470_VCM] = &surface_go_tps68470_vcm_reg_init_data,
- [TPS68470_VIO] = &surface_go_tps68470_vio_reg_init_data,
+ [TPS68470_VIO] = &generic_tps68470_vio_reg_init_data,
[TPS68470_VSIO] = &surface_go_tps68470_vsio_reg_init_data,
[TPS68470_AUX1] = &surface_go_tps68470_aux1_reg_init_data,
[TPS68470_AUX2] = &surface_go_tps68470_aux2_reg_init_data,
@@ -287,6 +291,159 @@ static const struct int3472_tps68470_board_data dell_7212_tps68470_board_data =
},
};
+/* Settings for Dell Latitude 5285 2-in-1 */
+
+/*
+ * The BIOS leaves GNVS field C0TP at zero, which causes INT3479's _DEP to
+ * resolve to PCI0 instead of the INT3472 device. Provide a static clock
+ * consumer list so probe registers MCLK lookups for both sensors regardless
+ * of the broken _DEP traversal.
+ */
+static const struct tps68470_clk_consumer dell_5285_clk_consumers[] = {
+ { .consumer_dev_name = "i2c-INT3477:00" }, /* OV8858 rear camera */
+ { .consumer_dev_name = "i2c-INT3479:00" }, /* OV5670 front camera */
+};
+
+static struct regulator_consumer_supply dell_5285_int3477_ana_consumer_supplies[] = {
+ REGULATOR_SUPPLY("avdd", "i2c-INT3477:00"),
+};
+
+static struct regulator_consumer_supply dell_5285_int3477_core_consumer_supplies[] = {
+ REGULATOR_SUPPLY("dvdd", "i2c-INT3477:00"),
+};
+
+/*
+ * VSIO controls the S_I2C_CTL passthrough; its voltage must match VIO
+ * (both 1800600 uV). dovdd/INT3477 enables the passthrough when OV8858
+ * opens its I2C path. avdd/INT3479 provides the OV5670 analog supply.
+ */
+static struct regulator_consumer_supply dell_5285_int3477_vsio_consumer_supplies[] = {
+ REGULATOR_SUPPLY("dovdd", "i2c-INT3477:00"),
+ REGULATOR_SUPPLY("avdd", "i2c-INT3479:00"),
+};
+
+static struct regulator_consumer_supply dell_5285_int3479_aux1_consumer_supplies[] = {
+ REGULATOR_SUPPLY("dvdd", "i2c-INT3479:00"),
+};
+
+static struct regulator_consumer_supply dell_5285_int3479_aux2_consumer_supplies[] = {
+ REGULATOR_SUPPLY("dovdd", "i2c-INT3479:00"),
+};
+
+static const struct regulator_init_data dell_5285_tps68470_core_reg_init_data = {
+ .constraints = {
+ .min_uV = 1200000,
+ .max_uV = 1200000,
+ .apply_uV = 1,
+ .valid_ops_mask = REGULATOR_CHANGE_STATUS,
+ },
+ .num_consumer_supplies = ARRAY_SIZE(dell_5285_int3477_core_consumer_supplies),
+ .consumer_supplies = dell_5285_int3477_core_consumer_supplies,
+};
+
+static const struct regulator_init_data dell_5285_tps68470_ana_reg_init_data = {
+ .constraints = {
+ .min_uV = 2815200,
+ .max_uV = 2815200,
+ .apply_uV = 1,
+ .valid_ops_mask = REGULATOR_CHANGE_STATUS,
+ },
+ .num_consumer_supplies = ARRAY_SIZE(dell_5285_int3477_ana_consumer_supplies),
+ .consumer_supplies = dell_5285_int3477_ana_consumer_supplies,
+};
+
+static const struct regulator_init_data dell_5285_tps68470_vcm_reg_init_data = {
+ .constraints = {
+ .min_uV = 2815200,
+ .max_uV = 2815200,
+ .apply_uV = 1,
+ .valid_ops_mask = REGULATOR_CHANGE_STATUS,
+ },
+ .num_consumer_supplies = 0,
+ .consumer_supplies = NULL,
+};
+
+static const struct regulator_init_data dell_5285_tps68470_vsio_reg_init_data = {
+ .constraints = {
+ .min_uV = 1800600,
+ .max_uV = 1800600,
+ .apply_uV = 1,
+ .valid_ops_mask = REGULATOR_CHANGE_STATUS,
+ },
+ .num_consumer_supplies = ARRAY_SIZE(dell_5285_int3477_vsio_consumer_supplies),
+ .consumer_supplies = dell_5285_int3477_vsio_consumer_supplies,
+};
+
+static const struct regulator_init_data dell_5285_tps68470_aux1_reg_init_data = {
+ .constraints = {
+ .min_uV = 1213200,
+ .max_uV = 1213200,
+ .apply_uV = 1,
+ .valid_ops_mask = REGULATOR_CHANGE_STATUS,
+ },
+ .num_consumer_supplies = ARRAY_SIZE(dell_5285_int3479_aux1_consumer_supplies),
+ .consumer_supplies = dell_5285_int3479_aux1_consumer_supplies,
+};
+
+static const struct regulator_init_data dell_5285_tps68470_aux2_reg_init_data = {
+ .constraints = {
+ .min_uV = 1800600,
+ .max_uV = 1800600,
+ .apply_uV = 1,
+ .valid_ops_mask = REGULATOR_CHANGE_STATUS,
+ },
+ .num_consumer_supplies = ARRAY_SIZE(dell_5285_int3479_aux2_consumer_supplies),
+ .consumer_supplies = dell_5285_int3479_aux2_consumer_supplies,
+};
+
+static const struct tps68470_regulator_platform_data dell_5285_tps68470_pdata = {
+ .reg_init_data = {
+ [TPS68470_CORE] = &dell_5285_tps68470_core_reg_init_data,
+ [TPS68470_ANA] = &dell_5285_tps68470_ana_reg_init_data,
+ [TPS68470_VCM] = &dell_5285_tps68470_vcm_reg_init_data,
+ [TPS68470_VIO] = &generic_tps68470_vio_reg_init_data,
+ [TPS68470_VSIO] = &dell_5285_tps68470_vsio_reg_init_data,
+ [TPS68470_AUX1] = &dell_5285_tps68470_aux1_reg_init_data,
+ [TPS68470_AUX2] = &dell_5285_tps68470_aux2_reg_init_data,
+ },
+};
+
+static struct gpiod_lookup_table dell_5285_int3477_gpios = {
+ .dev_id = "i2c-INT3477:00",
+ .table = {
+ /*
+ * TPS68470 GPIO9 = s_resetn (secondary camera reset, active-low)
+ * TPS68470 GPIO7 = s_enable (secondary camera enable/powerdown)
+ * These logic outputs are specifically designed for secondary
+ * camera control on the TPS68470. Matches Surface Go pattern.
+ */
+ GPIO_LOOKUP("tps68470-gpio", 9, "reset", GPIO_ACTIVE_LOW),
+ GPIO_LOOKUP("tps68470-gpio", 7, "powerdown", GPIO_ACTIVE_LOW),
+ { }
+ }
+};
+
+static struct gpiod_lookup_table dell_5285_int3479_gpios = {
+ .dev_id = "i2c-INT3479:00",
+ .table = {
+ GPIO_LOOKUP("tps68470-gpio", 3, "reset", GPIO_ACTIVE_LOW),
+ GPIO_LOOKUP("tps68470-gpio", 4, "powerdown", GPIO_ACTIVE_LOW),
+ { }
+ }
+};
+
+static const struct int3472_tps68470_board_data dell_5285_tps68470_board_data = {
+ .dev_name = "i2c-INT3472:05",
+ .tps68470_regulator_pdata = &dell_5285_tps68470_pdata,
+ .n_clk_consumers = ARRAY_SIZE(dell_5285_clk_consumers),
+ .clk_consumers = dell_5285_clk_consumers,
+ .n_gpiod_lookups = 2,
+ .tps68470_gpio_lookup_tables = {
+ &dell_5285_int3477_gpios,
+ &dell_5285_int3479_gpios,
+ },
+};
+
static const struct dmi_system_id int3472_tps68470_board_data_table[] = {
{
.matches = {
@@ -316,6 +473,13 @@ static const struct dmi_system_id int3472_tps68470_board_data_table[] = {
},
.driver_data = (void *)&dell_7212_tps68470_board_data,
},
+ {
+ .matches = {
+ DMI_EXACT_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
+ DMI_EXACT_MATCH(DMI_PRODUCT_NAME, "Latitude 5285"),
+ },
+ .driver_data = (void *)&dell_5285_tps68470_board_data,
+ },
{ }
};
--
2.51.0