Re: [PATCH] drm/panel: himax-hx83102: restore MODE_LPM after sending disable cmds

[Neil Armstrong]

On 4/25/26 18:57, Icenowy Zheng wrote:
> When preparing the panel, it seems that it always expects commands to be
> transferred in LP mode. However, the disable function removes the
> MIPI_DSI_MODE_LPM flag, and no other function re-adds it.
>
> As the unprepare function contains no DSI commands, re-adding the flag
> just after disabling the panel should be safe. Add the code re-adding
> the flag after the two commands for disabling the panel are sent.
>
> This fixes screen unblanking (after blanking once) on
> mt8188-geralt-ciri-sku1 device.
>
> Cc: stable@xxxxxxxxxxxxxxx # 6.11+
> Fixes: 0ef94554dc40 ("drm/panel: himax-hx83102: Break out as separate driver")
> Signed-off-by: Icenowy Zheng <zhengxingda@xxxxxxxxxxx>
> ---
>   drivers/gpu/drm/panel/panel-himax-hx83102.c | 2 ++
>   1 file changed, 2 insertions(+)
>
> diff --git a/drivers/gpu/drm/panel/panel-himax-hx83102.c b/drivers/gpu/drm/panel/panel-himax-hx83102.c
> index 8b2a68ee851e3..a5e5c9ea7a73f 100644
> --- a/drivers/gpu/drm/panel/panel-himax-hx83102.c
> +++ b/drivers/gpu/drm/panel/panel-himax-hx83102.c
> @@ -937,6 +937,8 @@ static int hx83102_disable(struct drm_panel *panel)
>   	mipi_dsi_dcs_set_display_off_multi(&dsi_ctx);
>   	mipi_dsi_dcs_enter_sleep_mode_multi(&dsi_ctx);
>   
> +	dsi->mode_flags |= MIPI_DSI_MODE_LPM;
> +
>   	mipi_dsi_msleep(&dsi_ctx, 150);
>   
>   	return dsi_ctx.accum_err;

Reviewed-by: Neil Armstrong <neil.armstrong@xxxxxxxxxx>

Thanks,
Neil