Re: [PATCH] [v4] wiznet: convert to GPIO descriptors

[Rob Herring]

On Mon, Apr 27, 2026 at 04:28:29PM +0200, Arnd Bergmann wrote:
> From: Arnd Bergmann <arnd@xxxxxxxx>
> 
> The w5100/w5300 drivers only support probing with old platform data in
> MMIO mode, or probing with DT in SPI mode. There are no users of this
> platform data in tree, and from the git history it appears that the only
> users of MMIO mode were on the (since removed) blackfin architecture.
> 
> Remove the platform data option, as it's unlikely to still be needed, and
> change the internal operation to GPIO descriptors, making the behavior
> the same for SPI and MMIO mode. The other data in the platform_data
> structure is the MAC address, so make that also handled the same for both.
> 
> It would probably be possible to just remove the MMIO mode driver
> completely, but it seems fine otherwise, and fixing it to use the modern
> interface seems easy enough.
> 
> The CONFIG_WIZNET_BUS_SHIFT value was apparently meant to be set
> at compile time to a machine specific value. This was always broken
> for multiplatform configurations with conflicting requirements, and
> in the mainline kernel it was set to 0 anyway. Leave it defined
> locally as 0 but rename it to something without the CONFIG_ prefix.
> 
> Acked-by: Rob Herring <robh@xxxxxxxxxx>

Well, 3 years later and I'm a bit grumpier seeing .txt binding 
additions. A new compatible plus new property we generally require 
converting the binding first. But I'm not going to revoke my ack here.

Is there even a known user for this new compatible?

Rob