RE: [RFC Patch net-next v1 9/9] r8169: add support for ethtool
From: Javen
Date: Tue Apr 28 2026 - 02:40:09 EST
>Hi,
>On 2026-04-20 at 07:49:57, javen (javen_xu@xxxxxxxxxxxxxx) wrote:
>> From: Javen Xu <javen_xu@xxxxxxxxxxxxxx>
>>
>> This patch add support for changing rx queues by ethtool. We can set
>> rx 1, 2, 4, 8 by ethtool -L eth1 rx num.
>>
>> Signed-off-by: Javen Xu <javen_xu@xxxxxxxxxxxxxx>
>> ---
>> drivers/net/ethernet/realtek/r8169_main.c | 68
>> +++++++++++++++++++++++
>> 1 file changed, 68 insertions(+)
>>
>> diff --git a/drivers/net/ethernet/realtek/r8169_main.c
>> b/drivers/net/ethernet/realtek/r8169_main.c
>> index 6b574fc336d6..57087abe7d88 100644
>> --- a/drivers/net/ethernet/realtek/r8169_main.c
>> +++ b/drivers/net/ethernet/realtek/r8169_main.c
>> @@ -6518,6 +6518,72 @@ static void r8169_init_napi(struct rtl8169_private
>*tp)
>> }
>> }
>>
>> +static void rtl8169_get_channels(struct net_device *dev,
>> + struct ethtool_channels *ch) {
>> + struct rtl8169_private *tp = netdev_priv(dev);
>> +
>> + ch->max_rx = tp->HwSuppNumRxQueues ? tp->HwSuppNumRxQueues :
>1;
>> + ch->max_tx = tp->HwSuppNumTxQueues ? tp->HwSuppNumTxQueues :
>1;
>> + ch->max_other = 0;
>> + ch->max_combined = 0;
>> +
>> + ch->rx_count = tp->num_rx_rings;
>> + ch->tx_count = tp->num_tx_rings;
>> + ch->other_count = 0;
>> + ch->combined_count = 0;
>> +}
>> +
>> +static int rtl8169_set_channels(struct net_device *dev,
>> + struct ethtool_channels *ch) {
>> + struct rtl8169_private *tp = netdev_priv(dev);
>> + bool if_running = netif_running(dev);
>> + int i;
>> +
>> + if (!tp->rss_support && (ch->rx_count > 1 || ch->tx_count > 1)) {
>> + netdev_warn(dev, "This chip does not support multiple
>channels/RSS.\n");
>> + return -EOPNOTSUPP;
>> + }
>> +
>> + if (ch->rx_count == 0 || ch->tx_count == 0)
>> + return -EINVAL;
>> + if (ch->rx_count > tp->HwSuppNumRxQueues ||
>> + ch->tx_count > tp->HwSuppNumTxQueues)
>> + return -EINVAL;
>> + if (ch->other_count || ch->combined_count)
>> + return -EINVAL;
>> +
>> + if (ch->rx_count == tp->num_rx_rings &&
>> + ch->tx_count == tp->num_tx_rings)
>> + return 0;
>> +
>Revisit the above checks, they are not needed since ethtool code does all
>these.
>> + if (if_running)
>> + rtl8169_close(dev);
>> +
>> + tp->num_rx_rings = ch->rx_count;
>> + tp->num_tx_rings = ch->tx_count;
>> +
>> + tp->rss_enable = (tp->num_rx_rings > 1 && tp->rss_support);
>Please help me understand your HW..Is there a condition where there are
>multi Rx queues but HW do not support RSS? I dont know how traffic is
>distributed across queues in that case (maybe - pinning flows to individual
>queues via ntuple or TC ?)
>
>Thanks,
>Sundeep
>
Hi, Sundeep
Thanks for your review.
This condition is not exist. I have removed it in the following link:
https://lore.kernel.org/netdev/f7dfe0357c04466895080f2b9aae1b56@xxxxxxxxxxxxxx/
BRs,
Javen
>> +
>> + for (i = 0; i < tp->HwSuppIndirTblEntries; i++) {
>> + if (tp->rss_enable)
>> + tp->rss_indir_tbl[i] = ethtool_rxfh_indir_default(i, tp-
>>num_rx_rings);
>> + else
>> + tp->rss_indir_tbl[i] = 0;
>> + }
>> +
>> + if (tp->rss_enable)
>> + tp->InitRxDescType = RX_DESC_RING_TYPE_RSS;
>> + else
>> + tp->InitRxDescType = RX_DESC_RING_TYPE_DEAFULT;
>> +
>> + if (if_running)
>> + return rtl_open(dev);
>> +
>> + return 0;
>> +}
>> +
>> static const struct ethtool_ops rtl8169_ethtool_ops = {
>> .supported_coalesce_params = ETHTOOL_COALESCE_USECS |
>> ETHTOOL_COALESCE_MAX_FRAMES, @@
>> -6536,6 +6602,8 @@ static const struct ethtool_ops rtl8169_ethtool_ops = {
>> .nway_reset = phy_ethtool_nway_reset,
>> .get_eee = rtl8169_get_eee,
>> .set_eee = rtl8169_set_eee,
>> + .get_channels = rtl8169_get_channels,
>> + .set_channels = rtl8169_set_channels,
>> .get_link_ksettings = phy_ethtool_get_link_ksettings,
>> .set_link_ksettings = rtl8169_set_link_ksettings,
>> .get_ringparam = rtl8169_get_ringparam,
>> --
>> 2.43.0
>>