Re: [PATCH 6/6] media: amlogic-c3: Add validations for ae and awb config

[Jacopo Mondi]

Hi Ricardo

On Wed, Apr 29, 2026 at 08:44:11AM +0200, Ricardo Ribalda wrote:
> Hi Jacopo
>
> On Wed, 29 Apr 2026 at 08:15, Jacopo Mondi
> <jacopo.mondi@xxxxxxxxxxxxxxxx> wrote:
> >
> > Hello
> >
> >    thank you Ricardo for the fix
> >
> > On Tue, Apr 28, 2026 at 03:49:49PM +0200, Ricardo Ribalda wrote:
> > > On Tue, 28 Apr 2026 at 15:26, Laurent Pinchart
> > > <laurent.pinchart@xxxxxxxxxxxxxxxx> wrote:
> > > >
> > > > On Tue, Apr 28, 2026 at 03:14:21PM +0200, Ricardo Ribalda wrote:
> > > > > On Tue, 28 Apr 2026 at 15:10, Laurent Pinchart wrote:
> > > > > > On Tue, Apr 28, 2026 at 12:41:12PM +0000, Ricardo Ribalda wrote:
> > > > > > > Avoid invalid memory access if the zones_num is bigger than
> > > > > > > zone_weight.
> > > > > > >
> > > > > > > This patch fixes the following smatch errors:
> > > > > > > drivers/media/platform/amlogic/c3/isp/c3-isp-params.c:111 c3_isp_params_awb_wt() error: buffer overflow 'cfg->zone_weight' 768 <= u32max
> > > > > > > drivers/media/platform/amlogic/c3/isp/c3-isp-params.c:111 c3_isp_params_awb_wt() error: buffer overflow 'cfg->zone_weight' 768 <= u32max
> > > > > > > drivers/media/platform/amlogic/c3/isp/c3-isp-params.c:227 c3_isp_params_ae_wt() error: buffer overflow 'cfg->zone_weight' 255 <= u32max
> > > > > > > drivers/media/platform/amlogic/c3/isp/c3-isp-params.c:227 c3_isp_params_ae_wt() error: buffer overflow 'cfg->zone_weight' 255 <= u32max
> > > > > > >
> > > > > > > Signed-off-by: Ricardo Ribalda <ribalda@xxxxxxxxxxxx>
> > > > > > > ---
> > > > > > >  drivers/media/platform/amlogic/c3/isp/c3-isp-params.c | 4 ++++
> > > > > > >  1 file changed, 4 insertions(+)
> > > > > > >
> > > > > > > diff --git a/drivers/media/platform/amlogic/c3/isp/c3-isp-params.c b/drivers/media/platform/amlogic/c3/isp/c3-isp-params.c
> > > > > > > index 6f9ca7a7dd88..42d780f684d1 100644
> > > > > > > --- a/drivers/media/platform/amlogic/c3/isp/c3-isp-params.c
> > > > > > > +++ b/drivers/media/platform/amlogic/c3/isp/c3-isp-params.c
> > > > > > > @@ -104,6 +104,8 @@ static void c3_isp_params_awb_wt(struct c3_isp_device *isp,
> > > > > > >       c3_isp_write(isp, ISP_AWB_BLK_WT_ADDR, 0);
> > > > > > >
> > > > > > >       zones_num = cfg->horiz_zones_num * cfg->vert_zones_num;
> > > > > > > +     if (WARN_ON(zones_num > C3_ISP_AWB_MAX_ZONES))
> > > > > >
> > > > > > This is triggerable by userspace, it shouldn't result in a WARN_ON().
> > > > > > Ideally the horiz_zones_num and vert_zones_num should be validated at
> > > > > > buf prepare time, and an error should be returned to userspace. That
> > > > > > will likely not fix your smatch issue though, I don't think it will be
> > > > > > able to understand that the values have been validated.
> > > > >
> > > > > Based on the warnings from the other drivers I also suspect that if
> > > > > you have validated the data somewhere else smatch will understand it.
> > > > >
> > > > > Even if you add a validate function I would suggest to keep the
> > > > > WARN_ON(), ideally it should never trigger, and if it triggers it will
> > > > > get a lot more attention to get it fixed.
> > > >
> > > > We could keep the WARN_ON() if we first validate the data, but the
> > > > driver doesn't currently :-/ I expect there could be more similar
> > > > issues.
> > >
> > > Yep, I got that. I will let you or Jacopo figure out the best way to
> > > implement the validation in buf_prepare. If you do not have time to
> > > implement it now I will just remove the WARN_ON in the interim... but
> > > from my experience we only fix stuff if we get an oops.
> > >
> > > Regards!
> > >
> > > >
> > > > > > Jacopo, do we need to add a validate function pointer to
> > > > > > v4l2_isp_params_block_type_info ?
> >
> > To allow drivers to provide an additional per-block validation
> > function ? I think it could be nice indeed.
> >
> > Ricardo, could you spare this patch for the moment ? I think we can
> > WARN_ON() to please smatch but we should pre-validate the buffer (without
> > spamming the system log in case of errors) to make sure we actually
> > never hit the WARN_ON() :)
> >
> > I have some patches in the pipe for v4l2-isp to add support for
> > extensible stats, I could pile up a few more to give drivers a space
> > where to implement additional per-block validations
>
> Do you have any idea of the timeline for this?
>

Give the change will likely come on top of extensible stats it might
slip this cycle

> I would really like to land this in this cycle. If it is going to take
> long maybe i can just
>
> if (zones_num > C3_ISP_AE_MAX_ZONES)

Fine by me

>
> and then when you add your checks you can promote it to:
>
> if (WARN_ON(zones_num > C3_ISP_AE_MAX_ZONES))

To be honest, if we pre-validate and silence the smatch warning with
the above

        if (zones_num > C3_ISP_AE_MAX_ZONES)

then there shouldn't be any need to WARN_ON() ?

>
> ?
>
> Also it would be much easier to backport this change than a change in v4l2-isp.
>
> Regards!
>
> >
> > > > > >
> > > > > > > +             zones_num = C3_ISP_AWB_MAX_ZONES;
> > > > > > >
> > > > > > >       /* Need to write 8 weights at once */
> > > > > > >       for (i = 0; i < zones_num / 8; i++) {
> > > > > > > @@ -220,6 +222,8 @@ static void c3_isp_params_ae_wt(struct c3_isp_device *isp,
> > > > > > >       c3_isp_write(isp, ISP_AE_BLK_WT_ADDR, 0);
> > > > > > >
> > > > > > >       zones_num = cfg->horiz_zones_num * cfg->vert_zones_num;
> > > > > > > +     if (WARN_ON(zones_num > C3_ISP_AE_MAX_ZONES))
> > > > > > > +             zones_num = C3_ISP_AE_MAX_ZONES;
> > > > > > >
> > > > > > >       /* Need to write 8 weights at once */
> > > > > > >       for (i = 0; i < zones_num / 8; i++) {
> > > >
> > > > --
> > > > Regards,
> > > >
> > > > Laurent Pinchart
> > >
> > >
> > >
> > > --
> > > Ricardo Ribalda
>
>
>
> --
> Ricardo Ribalda