[PATCH v4 1/9] dt-bindings: soc: qcom: eud: Add per-path child nodes for UTMI routing

[Elson Serrao]

The Qualcomm Embedded USB Debugger (EUD) can intercept one or two
independent High-Speed UTMI paths, depending on the SoC configuration.
Each path is distinct, with its own connector/controller connection
and role-dependent UTMI routing.

Because the EUD sits between the USB connector and the USB controller,
it must relay role changes across the UTMI path. In device role, the
EUD inserts its internal hub into the path to enable debug
functionality. In host role, the path remains directly connected
between the PHY and the USB controller, bypassing the EUD hub. These
hardware constraints require per-path role awareness, as UTMI path
roles may differ.

The existing binding models only a single UTMI path and assumes a
uniform routing model. While sufficient for simple device-role-only
configurations, this representation does not accurately describe EUD
hardware when role switching and/or multiple UTMI paths are involved.

To address this limitation, per-path child nodes are introduced to
describe individual UTMI paths through the EUD. Each path includes its
own ports description, allowing controller and connector associations,
as well as role-aware routing.

Signed-off-by: Elson Serrao <elson.serrao@xxxxxxxxxxxxxxxx>
---
 .../bindings/soc/qcom/qcom,eud.yaml           | 55 ++++++++++++++++++-
 1 file changed, 54 insertions(+), 1 deletion(-)

diff --git a/Documentation/devicetree/bindings/soc/qcom/qcom,eud.yaml b/Documentation/devicetree/bindings/soc/qcom/qcom,eud.yaml
index 84218636c0d8..21f75038a81c 100644
--- a/Documentation/devicetree/bindings/soc/qcom/qcom,eud.yaml
+++ b/Documentation/devicetree/bindings/soc/qcom/qcom,eud.yaml
@@ -45,10 +45,63 @@ properties:
         $ref: /schemas/graph.yaml#/properties/port
         description: This port is to be attached to the type C connector.
 
+  '#address-cells':
+    const: 1
+
+  '#size-cells':
+    const: 0
+
+patternProperties:
+  "^eud-path@[0-1]$":
+    type: object
+    description:
+      Represents one High-Speed UTMI path that EUD intercepts. Use eud-path nodes
+      to associate role-switching behavior with specific port connections, allowing
+      EUD to manage role transitions independently for each UTMI path.
+
+    properties:
+      reg:
+        maxItems: 1
+        description: Path number
+
+      usb-role-switch:
+        type: boolean
+        description:
+          Indicates that EUD should act as a role switch for this path.
+          In device role, debug mode inserts the EUD hub into the UTMI path. In
+          host role, the EUD hub is bypassed and UTMI traffic flows directly
+          between the PHY and the USB controller.
+
+      ports:
+        $ref: /schemas/graph.yaml#/properties/ports
+        description:
+          These ports are to be attached to the endpoint of the USB controller node
+          and USB connector node.
+
+        properties:
+          port@0:
+            $ref: /schemas/graph.yaml#/properties/port
+            description: This port is to be attached to the USB controller.
+
+          port@1:
+            $ref: /schemas/graph.yaml#/properties/port
+            description: This port is to be attached to the USB connector.
+
+    required:
+      - reg
+      - ports
+
+    additionalProperties: false
+
 required:
   - compatible
   - reg
-  - ports
+
+oneOf:
+  - required:
+      - ports
+  - required:
+      - eud-path@0
 
 additionalProperties: false
 
-- 
2.34.1