[PATCH] staging: media: atomisp: fix block comment formatting

[Ansh Bagga]

Fix checkpatch warnings regarding block comment alignment.
Block comments should use a trailing '*/' on a separate line to
adhere to the kernel coding style guidelines.

Signed-off-by: Ansh Bagga <ansh.bagga.linux@xxxxxxxxx>
---
 .../staging/media/atomisp/pci/atomisp_cmd.c   | 41 ++++++++++++-------
 1 file changed, 26 insertions(+), 15 deletions(-)

diff --git a/drivers/staging/media/atomisp/pci/atomisp_cmd.c b/drivers/staging/media/atomisp/pci/atomisp_cmd.c
index fec369575d88..37ccc95076a7 100644
--- a/drivers/staging/media/atomisp/pci/atomisp_cmd.c
+++ b/drivers/staging/media/atomisp/pci/atomisp_cmd.c
@@ -1380,8 +1380,10 @@ static void atomisp_update_grid_info(struct atomisp_sub_device *asd,
 	if (atomisp_css_get_grid_info(asd, pipe_id))
 		return;
 
-	/* We must free all buffers because they no longer match
-	   the grid size. */
+	/*
+	 * We must free all buffers because they no longer match
+	 * the grid size.
+	 */
 	atomisp_css_free_stat_buffers(asd);
 
 	err = atomisp_alloc_css_stat_bufs(asd, ATOMISP_INPUT_STREAM_GENERAL);
@@ -1394,7 +1396,8 @@ static void atomisp_update_grid_info(struct atomisp_sub_device *asd,
 		/* Failure for 3A buffers does not influence DIS buffers */
 		if (asd->params.s3a_output_bytes != 0) {
 			/* For SOC sensor happens s3a_output_bytes == 0,
-			 * using if condition to exclude false error log */
+			 * using if condition to exclude false error log
+			 */
 			dev_err(isp->dev, "Failed to allocate memory for 3A statistics\n");
 		}
 		goto err;
@@ -1687,8 +1690,9 @@ int atomisp_3a_stat(struct atomisp_sub_device *asd, int flag,
 
 	if (atomisp_compare_grid(asd, &config->grid_info) != 0) {
 		/* If the grid info in the argument differs from the current
-		   grid info, we tell the caller to reset the grid size and
-		   try again. */
+		 * grid info, we tell the caller to reset the grid size and
+		 * try again
+		 */
 		return -EAGAIN;
 	}
 
@@ -2463,8 +2467,9 @@ int atomisp_css_cp_dvs2_coefs(struct atomisp_sub_device *asd,
 		    memcmp(&coefs->grid, cur, sizeof(coefs->grid))) {
 			dev_err(asd->isp->dev, "dvs grid mismatch!\n");
 			/* If the grid info in the argument differs from the current
-			grid info, we tell the caller to reset the grid size and
-			try again. */
+			 * grid info, we tell the caller to reset the grid size and
+			 * try again.
+			 */
 			return -EAGAIN;
 		}
 
@@ -2519,8 +2524,9 @@ int atomisp_css_cp_dvs2_coefs(struct atomisp_sub_device *asd,
 		    memcmp(&dvs2_coefs.grid, cur, sizeof(dvs2_coefs.grid))) {
 			dev_err(asd->isp->dev, "dvs grid mismatch!\n");
 			/* If the grid info in the argument differs from the current
-			grid info, we tell the caller to reset the grid size and
-			try again. */
+			 * grid info, we tell the caller to reset the grid size and
+			 * try again.
+			 */
 			return -EAGAIN;
 		}
 
@@ -3027,7 +3033,8 @@ int atomisp_param(struct atomisp_sub_device *asd, int flag,
 
 		/* We always return the resolution and stride even if there is
 		 * no valid metadata. This allows the caller to get the
-		 * information needed to allocate user-space buffers. */
+		 * information needed to allocate user-space buffers.
+		 */
 		config->metadata_config.metadata_height = asd->
 			stream_env[ATOMISP_INPUT_STREAM_GENERAL].stream_info.
 			metadata_info.resolution.height;
@@ -3278,7 +3285,8 @@ atomisp_bytesperline_to_padded_width(unsigned int bytesperline,
 	case IA_CSS_FRAME_FORMAT_RGBA888:
 		return bytesperline / 4;
 	/* The following cases could be removed, but we leave them
-	   in to document the formats that are included. */
+	 * in to document the formats that are included.
+	 */
 	case IA_CSS_FRAME_FORMAT_NV11:
 	case IA_CSS_FRAME_FORMAT_NV12:
 	case IA_CSS_FRAME_FORMAT_NV16:
@@ -3315,8 +3323,9 @@ atomisp_v4l2_framebuffer_to_css_frame(const struct v4l2_framebuffer *arg,
 			   arg->fmt.bytesperline, sh_format);
 
 	/* Note: the padded width on an ia_css_frame is in elements, not in
-	   bytes. The RAW frame we use here should always be a 16bit RAW
-	   frame. This is why we bytesperline/2 is equal to the padded with */
+	 * bytes. The RAW frame we use here should always be a 16bit RAW
+	 * frame. This is why we bytesperline/2 is equal to the padded with
+	 */
 	if (ia_css_frame_allocate(&res, arg->fmt.width, arg->fmt.height,
 				       sh_format, padded_width, 0)) {
 		ret = -ENOMEM;
@@ -3926,7 +3935,8 @@ static inline int atomisp_set_sensor_mipi_to_isp(
 	}
 
 	/* Compatibility for sensors which provide no media bus code
-	 * in s_mbus_framefmt() nor support pad formats. */
+	 * in s_mbus_framefmt() nor support pad formats.
+	 */
 	if (mipi_info && mipi_info->input_format != -1) {
 		bayer_order = mipi_info->raw_bayer_order;
 
@@ -4385,7 +4395,8 @@ int atomisp_set_fmt(struct video_device *vdev, struct v4l2_format *f)
 			V4L2_SEL_TGT_CROP);
 
 	/* Try to enable YUV downscaling if ISP input is 10 % (either
-	 * width or height) bigger than the desired result. */
+	 * width or height) bigger than the desired result.
+	 */
 	if (!IS_MOFD ||
 	    isp_sink_crop.width * 9 / 10 < f->fmt.pix.width ||
 	    isp_sink_crop.height * 9 / 10 < f->fmt.pix.height ||
-- 
2.54.0