Re: [PATCH v5 0/6] media: lm3560: convert to use OF bindings

[Sakari Ailus]

Hi Svyatoslav,

On Mon, May 04, 2026 at 08:35:44AM +0300, Svyatoslav Ryhel wrote:
> нд, 3 трав. 2026 р. о 19:44 Svyatoslav Ryhel <clamor95@xxxxxxxxx> пише:
> >
> > Add missing HWEN input pin and IN supply. Fix v4l2 subdev registration.
> > Remove platform data and switch to OF device tree bindings.
> >
> > ---
> > Changes in v5:
> > - schema adjusted to take into account lm3559
> > - device_for_each_child_node > for_each_available_child_of_node
> > - lm3559 and lm3560 configuration was diverged with data match
> > - removed redundant header
> >
> > Changes in v4:
> > - fixed current being off by 10 in schema
> > - label property from schema replaced with modern equivalents
> > - lm3560_init_device moved before subdev registration
> > - v4l2_device_unregister_subdev > v4l2_async_unregister_subdev
> > - added subdevice cleanup if second led registration fails
> > - added check if "reg" property exists for LED nodes
> > - added missing fwnode_handle_put if device loop fails
> > - added bitmap to monitor configured LED id
> > - added pm_ptr() macro for PM operations pointer
> >
> > Changes in v3:
> > - added note regarding lm3559 in the schema commit
> > - lm3560 power on/off functions converted to be part of PM,
> >   dropped redundant wrappers
> >
> > Changes in v2:
> > - vendor properties swapped with generic LED properties
> > - added mutex lock usage optimization
> > - power supply and enable gpio commits squashed into PM
> >   configuration since they are both required in making
> >   proper on/off sequence.
> > ---
> >
> > Svyatoslav Ryhel (6):
> >   dt-bindings: leds: Document TI LM3560 Synchronous Boost Flash Driver
> >   media: i2c: lm3560: Fix v4l2 subdev registration
> >   media: i2c: lm3560: Optimize mutex lock usage
> >   media: i2c: lm3560: Convert to use OF bindings
> >   media: i2c: lm3560: Add support for PM features
> >   media: i2c: lm3560: Add proper support for LM3559
> >
> >  .../devicetree/bindings/leds/ti,lm3560.yaml   | 163 ++++++++
> >  drivers/media/i2c/lm3560.c                    | 385 +++++++++++++++---
> >  include/media/i2c/lm3560.h                    |  84 ----
> >  3 files changed, 481 insertions(+), 151 deletions(-)
> >  create mode 100644 Documentation/devicetree/bindings/leds/ti,lm3560.yaml
> >  delete mode 100644 include/media/i2c/lm3560.h
> >
> > --
> > 2.51.0
> >
> 
> Hello Sakari!
> 
> During preparation of this patchset 2 important issues were not
> tracked and discovered only after sending.
> 
> 1. In "dt-bindings: leds: Document TI LM3560 Synchronous Boost Flash Driver"
> 
> flash-max-microamp and led-max-microamp ranges of lm3559 and lm3560
> pattern properties were swapped.
> 
> 2. In "media: i2c: lm3560: Convert to use OF bindings"
> 
> In the lm3560_probe struct device_node *node should be removed and
> for_each_available_child_of_node should be replaced with
> for_each_available_child_of_node_scoped
> 
> I am sorry for this inconvenience. If you find it suitable to adjust
> these commits on apply feel free to do so, alternatively I can fix
> them in the next iteration.

Ack, I have a few comments on the set as well; please address the issues in
v6.

-- 
Kind regards,

Sakari Ailus