[PATCH v6 5/6] media: i2c: lm3560: Add support for PM features
From: Svyatoslav Ryhel
Date: Wed May 06 2026 - 02:50:11 EST
Add support for power management features to better control the LM3560
within the media framework. To achieve the desired PM support, the HWEN
GPIO and VIN power supply were added and configured into power on/off
sequences. Added PM operations along with the PM configuration setup.
Signed-off-by: Svyatoslav Ryhel <clamor95@xxxxxxxxx>
---
drivers/media/i2c/lm3560.c | 117 ++++++++++++++++++++++++++++++++++---
1 file changed, 110 insertions(+), 7 deletions(-)
diff --git a/drivers/media/i2c/lm3560.c b/drivers/media/i2c/lm3560.c
index 609fd0339345..49030bc0f441 100644
--- a/drivers/media/i2c/lm3560.c
+++ b/drivers/media/i2c/lm3560.c
@@ -12,12 +12,15 @@
#include <linux/bitmap.h>
#include <linux/delay.h>
#include <linux/module.h>
+#include <linux/gpio/consumer.h>
#include <linux/i2c.h>
#include <linux/slab.h>
#include <linux/mod_devicetable.h>
#include <linux/mutex.h>
+#include <linux/pm_runtime.h>
#include <linux/property.h>
#include <linux/regmap.h>
+#include <linux/regulator/consumer.h>
#include <linux/videodev2.h>
#include <media/i2c/lm3560.h>
#include <media/v4l2-ctrls.h>
@@ -48,6 +51,8 @@ enum led_enable {
* @dev: pointer to &struct device
* @regmap: reg. map for i2c
* @lock: muxtex for serial access.
+ * @hwen_gpio: line connected to HWEN pin
+ * @vin_supply: line connected to IN supply (2.5V - 5.5V)
* @led_mode: V4L2 LED mode
* @ctrls_led: V4L2 controls
* @subdev_led: V4L2 subdev
@@ -62,6 +67,9 @@ struct lm3560_flash {
struct regmap *regmap;
struct mutex lock;
+ struct gpio_desc *hwen_gpio;
+ struct regulator *vin_supply;
+
enum v4l2_flash_led_mode led_mode;
struct v4l2_ctrl_handler ctrls_led[LM3560_LED_MAX];
struct v4l2_subdev subdev_led[LM3560_LED_MAX];
@@ -176,12 +184,17 @@ static int lm3560_get_ctrl(struct v4l2_ctrl *ctrl, enum lm3560_led_id led_no)
struct lm3560_flash *flash = to_lm3560_flash(ctrl, led_no);
int rval = -EINVAL;
+ if (!pm_runtime_get_if_active(flash->dev))
+ return 0;
+
if (ctrl->id == V4L2_CID_FLASH_FAULT) {
s32 fault = 0;
unsigned int reg_val;
rval = regmap_read(flash->regmap, REG_FLAG, ®_val);
- if (rval < 0)
+ if (rval < 0) {
+ pm_runtime_put(flash->dev);
return rval;
+ }
if (reg_val & FAULT_SHORT_CIRCUIT)
fault |= V4L2_FLASH_FAULT_SHORT_CIRCUIT;
if (reg_val & FAULT_OVERTEMP)
@@ -191,6 +204,8 @@ static int lm3560_get_ctrl(struct v4l2_ctrl *ctrl, enum lm3560_led_id led_no)
ctrl->cur.val = fault;
}
+ pm_runtime_put(flash->dev);
+
return rval;
}
@@ -200,6 +215,9 @@ static int lm3560_set_ctrl(struct v4l2_ctrl *ctrl, enum lm3560_led_id led_no)
u8 tout_bits;
int rval = -EINVAL;
+ if (!pm_runtime_get_if_active(flash->dev))
+ return 0;
+
switch (ctrl->id) {
case V4L2_CID_FLASH_LED_MODE:
flash->led_mode = ctrl->val;
@@ -245,6 +263,8 @@ static int lm3560_set_ctrl(struct v4l2_ctrl *ctrl, enum lm3560_led_id led_no)
break;
}
+ pm_runtime_put(flash->dev);
+
return rval;
}
@@ -408,6 +428,38 @@ static int lm3560_init_device(struct lm3560_flash *flash)
return rval;
}
+static int __maybe_unused lm3560_power_off(struct device *dev)
+{
+ struct lm3560_flash *flash = dev_get_drvdata(dev);
+
+ gpiod_set_value_cansleep(flash->hwen_gpio, 0);
+ regulator_disable(flash->vin_supply);
+
+ return 0;
+}
+
+static int __maybe_unused lm3560_power_on(struct device *dev)
+{
+ struct lm3560_flash *flash = dev_get_drvdata(dev);
+ int rval;
+
+ rval = regulator_enable(flash->vin_supply);
+ if (rval < 0) {
+ dev_err(flash->dev, "failed to enable vin power supply\n");
+ return rval;
+ }
+
+ gpiod_set_value_cansleep(flash->hwen_gpio, 1);
+
+ rval = lm3560_init_device(flash);
+ if (rval < 0) {
+ lm3560_power_off(dev);
+ return rval;
+ }
+
+ return 0;
+}
+
static void lm3560_subdev_cleanup(struct lm3560_flash *flash)
{
int led_no;
@@ -440,6 +492,17 @@ static int lm3560_probe(struct i2c_client *client)
bitmap_zero(flash->led_id, LM3560_LED_MAX);
+ flash->hwen_gpio = devm_gpiod_get_optional(flash->dev, "enable",
+ GPIOD_OUT_LOW);
+ if (IS_ERR(flash->hwen_gpio))
+ return dev_err_probe(flash->dev, PTR_ERR(flash->hwen_gpio),
+ "failed to get hwen gpio\n");
+
+ flash->vin_supply = devm_regulator_get(flash->dev, "vin");
+ if (IS_ERR(flash->vin_supply))
+ return dev_err_probe(flash->dev, PTR_ERR(flash->vin_supply),
+ "failed to get vin-supply\n");
+
flash->peak = LM3560_PEAK_1600mA;
rval = device_property_read_u32(flash->dev,
"ti,peak-current-microamp", &peak_ua);
@@ -467,9 +530,19 @@ static int lm3560_probe(struct i2c_client *client)
&flash->max_flash_timeout);
flash->max_flash_timeout /= 1000;
+ rval = regulator_enable(flash->vin_supply);
+ if (rval < 0)
+ return dev_err_probe(flash->dev, rval,
+ "failed to enable vin power supply\n");
+
+ gpiod_set_value_cansleep(flash->hwen_gpio, 1);
+
rval = lm3560_init_device(flash);
if (rval < 0)
- return rval;
+ goto error_disable;
+
+ pm_runtime_set_active(flash->dev);
+ pm_runtime_enable(flash->dev);
device_for_each_child_node_scoped(flash->dev, node) {
u32 reg;
@@ -490,10 +563,10 @@ static int lm3560_probe(struct i2c_client *client)
rval = lm3560_subdev_init(flash, reg, node);
if (rval < 0) {
- lm3560_subdev_cleanup(flash);
- return dev_err_probe(flash->dev, rval,
- "failed to register led%d\n",
- reg);
+ dev_err(flash->dev,
+ "failed to register led%d: %d\n",
+ reg, rval);
+ goto error_clean;
}
set_bit(reg, flash->led_id);
@@ -502,7 +575,23 @@ static int lm3560_probe(struct i2c_client *client)
i2c_set_clientdata(client, flash);
+ pm_runtime_set_autosuspend_delay(flash->dev, 1000);
+ pm_runtime_use_autosuspend(flash->dev);
+ pm_runtime_idle(flash->dev);
+
return 0;
+
+error_clean:
+ pm_runtime_disable(flash->dev);
+ pm_runtime_set_suspended(flash->dev);
+
+ lm3560_subdev_cleanup(flash);
+
+error_disable:
+ gpiod_set_value_cansleep(flash->hwen_gpio, 0);
+ regulator_disable(flash->vin_supply);
+
+ return rval;
}
static void lm3560_remove(struct i2c_client *client)
@@ -510,8 +599,22 @@ static void lm3560_remove(struct i2c_client *client)
struct lm3560_flash *flash = i2c_get_clientdata(client);
lm3560_subdev_cleanup(flash);
+
+ /*
+ * Disable runtime PM. In case runtime PM is disabled in the kernel,
+ * make sure to turn power off manually.
+ */
+ pm_runtime_disable(&client->dev);
+ if (!pm_runtime_status_suspended(&client->dev)) {
+ lm3560_power_off(&client->dev);
+ pm_runtime_set_suspended(&client->dev);
+ }
}
+static const struct dev_pm_ops lm3560_pm_ops = {
+ SET_RUNTIME_PM_OPS(lm3560_power_off, lm3560_power_on, NULL)
+};
+
static const struct of_device_id lm3560_of_match[] = {
{ .compatible = "ti,lm3559" },
{ .compatible = "ti,lm3560" },
@@ -530,7 +633,7 @@ MODULE_DEVICE_TABLE(i2c, lm3560_id_table);
static struct i2c_driver lm3560_i2c_driver = {
.driver = {
.name = LM3560_NAME,
- .pm = NULL,
+ .pm = pm_ptr(&lm3560_pm_ops),
.of_match_table = lm3560_of_match,
},
.probe = lm3560_probe,
--
2.51.0