[PATCH 0/3] arm64: dts: freescale: add Toradex Aquila iMX95

[Franz Schnyder]

This patch series adds support for the Toradex Aquila i.MX95 SoM and its
currently available carrier boards: the Aquila Development Board and the
Clover carrier board.

The module consists of an NXP i.MX95 family SoC, up to 16GB LPDDR5 RAM,
up to 128GB of storage, a USB 3.2 OTG and USB 2.0 Host, a Gigabit
Ethernet PHY, a 10 Gigabit Ethernet interface, an I2C EEPROM and 
Temperature Sensor, an RX8130 RTC, one Quad lane CSI interface, one Quad
lane DSI or CSI interface, one LVDS interface (one or two channels), and
some optional addons: DisplayPort (through a DSI-DP bridge), TPM 2.0, 
and a WiFi/BT module.

Link: https://www.toradex.com/computer-on-modules/aquila-arm-family/nxp-imx95
Link: https://www.toradex.com/products/carrier-board/aquila-development-board-kit
Link: https://www.toradex.com/products/carrier-board/clover
Signed-off-by: Franz Schnyder <franz.schnyder@xxxxxxxxxxx>
---
Antoine Gouby (1):
      arm64: dts: freescale: imx95-aquila: Add Clover carrier board

Franz Schnyder (1):
      dt-bindings: arm: fsl: add Aquila iMX95

João Paulo Gonçalves (1):
      arm64: dts: freescale: add Aquila iMX95 support

 Documentation/devicetree/bindings/arm/fsl.yaml     |    8 +
 arch/arm64/boot/dts/freescale/Makefile             |    2 +
 .../boot/dts/freescale/imx95-aquila-clover.dts     |  294 +++++
 arch/arm64/boot/dts/freescale/imx95-aquila-dev.dts |  398 +++++++
 arch/arm64/boot/dts/freescale/imx95-aquila.dtsi    | 1160 ++++++++++++++++++++
 5 files changed, 1862 insertions(+)
---
base-commit: ebdfb84ecf7a0bba26d7a04edae98dd600fd4b42
change-id: 20260501-add-aquila-imx95-423256af3d21

Best regards,
-- 
Franz Schnyder <franz.schnyder@xxxxxxxxxxx>