Re: [PATCH 1/2] dt-bindings: display: mayqueen,pixpaper: add pixpaper-426m

[Conor Dooley]

On Wed, May 06, 2026 at 02:25:37PM +0800, LiangCheng Wang wrote:
> Add the compatible string for the PIXPAPER 4.26 monochrome
> e-ink panel to the Mayqueen Pixpaper binding.
> 
> The new panel uses the same SPI and GPIO control interface as
> the existing Pixpaper panel, so extend the existing binding
> instead of adding a separate schema. Document the new compatible
> string and add an example node for pixpaper-426m.
> 
> Signed-off-by: LiangCheng Wang <zaq14760@xxxxxxxxx>
> ---
>  .../bindings/display/mayqueen,pixpaper.yaml        | 25 +++++++++++++++++-----
>  1 file changed, 20 insertions(+), 5 deletions(-)
> 
> diff --git a/Documentation/devicetree/bindings/display/mayqueen,pixpaper.yaml b/Documentation/devicetree/bindings/display/mayqueen,pixpaper.yaml
> index cd27f8ba5ae1d94660818525b5fa71db98c8acb7..4b0db2b079ebea244eb149a52ee1d8dbab0f60bb 100644
> --- a/Documentation/devicetree/bindings/display/mayqueen,pixpaper.yaml
> +++ b/Documentation/devicetree/bindings/display/mayqueen,pixpaper.yaml
> @@ -4,22 +4,23 @@
>  $id: http://devicetree.org/schemas/display/mayqueen,pixpaper.yaml#
>  $schema: http://devicetree.org/meta-schemas/core.yaml#
>  
> -title: Mayqueen Pixpaper e-ink display panel
> +title: Mayqueen Pixpaper e-ink display panels
>  
>  maintainers:
>    - LiangCheng Wang <zaq14760@xxxxxxxxx>
>  
>  description:
> -  The Pixpaper is an e-ink display panel controlled via an SPI interface.
> -  The panel has a resolution of 122x250 pixels and requires GPIO pins for
> -  reset, busy, and data/command control.
> +  Mayqueen Pixpaper e-ink display panels are controlled via an SPI interface
> +  and require GPIO pins for reset, busy, and data/command control.
>  
>  allOf:
>    - $ref: /schemas/spi/spi-peripheral-props.yaml#
>  
>  properties:
>    compatible:
> -    const: mayqueen,pixpaper
> +    enum:
> +      - mayqueen,pixpaper
> +      - mayqueen,pixpaper-426m

The commit message makes it sound like both devices could be compatible,
but the diff says they are not. What actually makes them incompatible?

>  
>    reg:
>      maxItems: 1
> @@ -61,3 +62,17 @@ examples:
>              dc-gpios = <&gpio1 19 GPIO_ACTIVE_HIGH>;
>          };
>      };
> +  - |
> +    #include <dt-bindings/gpio/gpio.h>
> +    spi {
> +        #address-cells = <1>;
> +        #size-cells = <0>;
> +        display@0 {
> +            compatible = "mayqueen,pixpaper-426m";
> +            reg = <0>;
> +            spi-max-frequency = <1000000>;
> +            reset-gpios = <&gpio1 17 GPIO_ACTIVE_HIGH>;
> +            busy-gpios = <&gpio1 18 GPIO_ACTIVE_HIGH>;
> +            dc-gpios = <&gpio1 19 GPIO_ACTIVE_HIGH>;
> +        };
> +    };

This example just duplicates the existing one, there's no value in
adding it.

pw-bot: changes-requested

Cheers,
Conor.

> 
> -- 
> 2.34.1
>

Attachment: signature.asc
Description: PGP signature