[PATCH] arm64: dts: qcom: sc8280xp: Flatten usb controller nodes
From: Xilin Wu
Date: Thu May 07 2026 - 10:33:05 EST
Flatten usb controller nodes and update to using latest bindings
and flattened driver approach.
Signed-off-by: Xilin Wu <sophon@xxxxxxxxx>
---
arch/arm64/boot/dts/qcom/sa8295p-adp.dts | 12 +-
arch/arm64/boot/dts/qcom/sa8540p-ride.dts | 6 +-
arch/arm64/boot/dts/qcom/sc8280xp-crd.dts | 12 +-
.../boot/dts/qcom/sc8280xp-huawei-gaokun3.dts | 12 +-
.../dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts | 12 +-
.../boot/dts/qcom/sc8280xp-microsoft-arcata.dts | 12 +-
.../boot/dts/qcom/sc8280xp-microsoft-blackrock.dts | 18 +--
arch/arm64/boot/dts/qcom/sc8280xp.dtsi | 156 +++++++++------------
8 files changed, 97 insertions(+), 143 deletions(-)
diff --git a/arch/arm64/boot/dts/qcom/sa8295p-adp.dts b/arch/arm64/boot/dts/qcom/sa8295p-adp.dts
index d28d69162427..abd0f6a64b11 100644
--- a/arch/arm64/boot/dts/qcom/sa8295p-adp.dts
+++ b/arch/arm64/boot/dts/qcom/sa8295p-adp.dts
@@ -587,12 +587,10 @@ &ufs_card_phy {
};
&usb_0 {
- status = "okay";
-};
-
-&usb_0_dwc3 {
/* TODO: Define USB-C connector properly */
dr_mode = "peripheral";
+
+ status = "okay";
};
&usb_0_hsphy {
@@ -611,12 +609,10 @@ &usb_0_qmpphy {
};
&usb_1 {
- status = "okay";
-};
-
-&usb_1_dwc3 {
/* TODO: Define USB-C connector properly */
dr_mode = "host";
+
+ status = "okay";
};
&usb_1_hsphy {
diff --git a/arch/arm64/boot/dts/qcom/sa8540p-ride.dts b/arch/arm64/boot/dts/qcom/sa8540p-ride.dts
index 44177e9b64b5..e794689f0777 100644
--- a/arch/arm64/boot/dts/qcom/sa8540p-ride.dts
+++ b/arch/arm64/boot/dts/qcom/sa8540p-ride.dts
@@ -462,11 +462,9 @@ &ufs_mem_phy {
};
&usb_0 {
- status = "okay";
-};
-
-&usb_0_dwc3 {
dr_mode = "peripheral";
+
+ status = "okay";
};
&usb_0_hsphy {
diff --git a/arch/arm64/boot/dts/qcom/sc8280xp-crd.dts b/arch/arm64/boot/dts/qcom/sc8280xp-crd.dts
index c53e00cae465..3b624544b676 100644
--- a/arch/arm64/boot/dts/qcom/sc8280xp-crd.dts
+++ b/arch/arm64/boot/dts/qcom/sc8280xp-crd.dts
@@ -816,11 +816,9 @@ &ufs_mem_phy {
};
&usb_0 {
- status = "okay";
-};
-
-&usb_0_dwc3 {
dr_mode = "host";
+
+ status = "okay";
};
&usb_0_dwc3_hs {
@@ -853,11 +851,9 @@ &usb_0_qmpphy_out {
};
&usb_1 {
- status = "okay";
-};
-
-&usb_1_dwc3 {
dr_mode = "host";
+
+ status = "okay";
};
&usb_1_dwc3_hs {
diff --git a/arch/arm64/boot/dts/qcom/sc8280xp-huawei-gaokun3.dts b/arch/arm64/boot/dts/qcom/sc8280xp-huawei-gaokun3.dts
index 9819454abe13..dfc1341ccc5d 100644
--- a/arch/arm64/boot/dts/qcom/sc8280xp-huawei-gaokun3.dts
+++ b/arch/arm64/boot/dts/qcom/sc8280xp-huawei-gaokun3.dts
@@ -1129,11 +1129,9 @@ bluetooth {
};
&usb_0 {
- status = "okay";
-};
-
-&usb_0_dwc3 {
dr_mode = "host";
+
+ status = "okay";
};
&usb_0_dwc3_hs {
@@ -1166,11 +1164,9 @@ &usb_0_qmpphy_out {
};
&usb_1 {
- status = "okay";
-};
-
-&usb_1_dwc3 {
dr_mode = "host";
+
+ status = "okay";
};
&usb_1_dwc3_hs {
diff --git a/arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts b/arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts
index d84ca010ab9d..a1e8e75fc553 100644
--- a/arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts
+++ b/arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts
@@ -1338,11 +1338,9 @@ bluetooth {
};
&usb_0 {
- status = "okay";
-};
-
-&usb_0_dwc3 {
dr_mode = "host";
+
+ status = "okay";
};
&usb_0_dwc3_hs {
@@ -1376,11 +1374,9 @@ &usb_0_qmpphy_out {
};
&usb_1 {
- status = "okay";
-};
-
-&usb_1_dwc3 {
dr_mode = "host";
+
+ status = "okay";
};
&usb_1_dwc3_hs {
diff --git a/arch/arm64/boot/dts/qcom/sc8280xp-microsoft-arcata.dts b/arch/arm64/boot/dts/qcom/sc8280xp-microsoft-arcata.dts
index f2b4470d4407..207c13adcb9d 100644
--- a/arch/arm64/boot/dts/qcom/sc8280xp-microsoft-arcata.dts
+++ b/arch/arm64/boot/dts/qcom/sc8280xp-microsoft-arcata.dts
@@ -755,11 +755,9 @@ embedded-controller {
};
&usb_0 {
- status = "okay";
-};
-
-&usb_0_dwc3 {
dr_mode = "host";
+
+ status = "okay";
};
&usb_0_dwc3_hs {
@@ -792,11 +790,9 @@ &usb_0_qmpphy_out {
};
&usb_1 {
- status = "okay";
-};
-
-&usb_1_dwc3 {
dr_mode = "host";
+
+ status = "okay";
};
&usb_1_dwc3_hs {
diff --git a/arch/arm64/boot/dts/qcom/sc8280xp-microsoft-blackrock.dts b/arch/arm64/boot/dts/qcom/sc8280xp-microsoft-blackrock.dts
index 00bbeeef6f14..0cfd69201cae 100644
--- a/arch/arm64/boot/dts/qcom/sc8280xp-microsoft-blackrock.dts
+++ b/arch/arm64/boot/dts/qcom/sc8280xp-microsoft-blackrock.dts
@@ -983,11 +983,9 @@ bluetooth {
};
&usb_0 {
- status = "okay";
-};
-
-&usb_0_dwc3 {
dr_mode = "host";
+
+ status = "okay";
};
&usb_0_dwc3_hs {
@@ -1020,11 +1018,9 @@ &usb_0_qmpphy_out {
};
&usb_1 {
- status = "okay";
-};
-
-&usb_1_dwc3 {
dr_mode = "host";
+
+ status = "okay";
};
&usb_1_dwc3_hs {
@@ -1060,12 +1056,10 @@ &usb_2 {
pinctrl-0 = <&usb2_en_state>;
pinctrl-names = "default";
- status = "okay";
-};
-
-&usb_2_dwc3 {
phys = <&usb_2_hsphy0>, <&usb_2_qmpphy0>;
phy-names = "usb2-0", "usb3-0";
+
+ status = "okay";
};
&usb_2_hsphy0 {
diff --git a/arch/arm64/boot/dts/qcom/sc8280xp.dtsi b/arch/arm64/boot/dts/qcom/sc8280xp.dtsi
index 761f229e8f47..ecfc64d864fc 100644
--- a/arch/arm64/boot/dts/qcom/sc8280xp.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc8280xp.dtsi
@@ -3940,12 +3940,9 @@ system-cache-controller@9200000 {
interrupts = <GIC_SPI 582 IRQ_TYPE_LEVEL_HIGH>;
};
- usb_2: usb@a4f8800 {
- compatible = "qcom,sc8280xp-dwc3-mp", "qcom,dwc3";
- reg = <0 0x0a4f8800 0 0x400>;
- #address-cells = <2>;
- #size-cells = <2>;
- ranges;
+ usb_2: usb@a400000 {
+ compatible = "qcom,sc8280xp-dwc3-mp", "qcom,snps-dwc3";
+ reg = <0 0x0a400000 0 0xfc100>;
clocks = <&gcc GCC_CFG_NOC_USB3_MP_AXI_CLK>,
<&gcc GCC_USB30_MP_MASTER_CLK>,
@@ -3963,7 +3960,8 @@ usb_2: usb@a4f8800 {
<&gcc GCC_USB30_MP_MASTER_CLK>;
assigned-clock-rates = <19200000>, <200000000>;
- interrupts-extended = <&intc GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>,
+ interrupts-extended = <&intc GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>,
+ <&intc GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>,
<&intc GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>,
<&intc GIC_SPI 857 IRQ_TYPE_LEVEL_HIGH>,
<&intc GIC_SPI 856 IRQ_TYPE_LEVEL_HIGH>,
@@ -3982,7 +3980,8 @@ usb_2: usb@a4f8800 {
<&pdc 16 IRQ_TYPE_LEVEL_HIGH>,
<&pdc 17 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "pwr_event_1", "pwr_event_2",
+ interrupt-names = "dwc_usb3",
+ "pwr_event_1", "pwr_event_2",
"pwr_event_3", "pwr_event_4",
"hs_phy_1", "hs_phy_2",
"hs_phy_3", "hs_phy_4",
@@ -4003,33 +4002,25 @@ usb_2: usb@a4f8800 {
wakeup-source;
+ iommus = <&apps_smmu 0x800 0x0>;
+ phys = <&usb_2_hsphy0>, <&usb_2_qmpphy0>,
+ <&usb_2_hsphy1>, <&usb_2_qmpphy1>,
+ <&usb_2_hsphy2>,
+ <&usb_2_hsphy3>;
+ phy-names = "usb2-0", "usb3-0",
+ "usb2-1", "usb3-1",
+ "usb2-2",
+ "usb2-3";
+ dr_mode = "host";
+ snps,dis-u1-entry-quirk;
+ snps,dis-u2-entry-quirk;
+
status = "disabled";
+ };
- usb_2_dwc3: usb@a400000 {
- compatible = "snps,dwc3";
- reg = <0 0x0a400000 0 0xcd00>;
- interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>;
- iommus = <&apps_smmu 0x800 0x0>;
- phys = <&usb_2_hsphy0>, <&usb_2_qmpphy0>,
- <&usb_2_hsphy1>, <&usb_2_qmpphy1>,
- <&usb_2_hsphy2>,
- <&usb_2_hsphy3>;
- phy-names = "usb2-0", "usb3-0",
- "usb2-1", "usb3-1",
- "usb2-2",
- "usb2-3";
- dr_mode = "host";
- snps,dis-u1-entry-quirk;
- snps,dis-u2-entry-quirk;
- };
- };
-
- usb_0: usb@a6f8800 {
- compatible = "qcom,sc8280xp-dwc3", "qcom,dwc3";
- reg = <0 0x0a6f8800 0 0x400>;
- #address-cells = <2>;
- #size-cells = <2>;
- ranges;
+ usb_0: usb@a600000 {
+ compatible = "qcom,sc8280xp-dwc3", "qcom,snps-dwc3";
+ reg = <0 0x0a600000 0 0xfc100>;
clocks = <&gcc GCC_CFG_NOC_USB3_PRIM_AXI_CLK>,
<&gcc GCC_USB30_PRIM_MASTER_CLK>,
@@ -4047,12 +4038,14 @@ usb_0: usb@a6f8800 {
<&gcc GCC_USB30_PRIM_MASTER_CLK>;
assigned-clock-rates = <19200000>, <200000000>;
- interrupts-extended = <&intc GIC_SPI 804 IRQ_TYPE_LEVEL_HIGH>,
+ interrupts-extended = <&intc GIC_SPI 803 IRQ_TYPE_LEVEL_HIGH>,
+ <&intc GIC_SPI 804 IRQ_TYPE_LEVEL_HIGH>,
<&intc GIC_SPI 805 IRQ_TYPE_LEVEL_HIGH>,
<&pdc 14 IRQ_TYPE_EDGE_BOTH>,
<&pdc 15 IRQ_TYPE_EDGE_BOTH>,
<&pdc 138 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "pwr_event",
+ interrupt-names = "dwc_usb3",
+ "pwr_event",
"hs_phy_irq",
"dp_hs_phy_irq",
"dm_hs_phy_irq",
@@ -4069,46 +4062,38 @@ usb_0: usb@a6f8800 {
wakeup-source;
- status = "disabled";
+ iommus = <&apps_smmu 0x820 0x0>;
+ phys = <&usb_0_hsphy>, <&usb_0_qmpphy QMP_USB43DP_USB3_PHY>;
+ phy-names = "usb2-phy", "usb3-phy";
+ snps,dis-u1-entry-quirk;
+ snps,dis-u2-entry-quirk;
- usb_0_dwc3: usb@a600000 {
- compatible = "snps,dwc3";
- reg = <0 0x0a600000 0 0xcd00>;
- interrupts = <GIC_SPI 803 IRQ_TYPE_LEVEL_HIGH>;
- iommus = <&apps_smmu 0x820 0x0>;
- phys = <&usb_0_hsphy>, <&usb_0_qmpphy QMP_USB43DP_USB3_PHY>;
- phy-names = "usb2-phy", "usb3-phy";
- snps,dis-u1-entry-quirk;
- snps,dis-u2-entry-quirk;
+ status = "disabled";
- ports {
- #address-cells = <1>;
- #size-cells = <0>;
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
- port@0 {
- reg = <0>;
+ port@0 {
+ reg = <0>;
- usb_0_dwc3_hs: endpoint {
- };
+ usb_0_dwc3_hs: endpoint {
};
+ };
- port@1 {
- reg = <1>;
+ port@1 {
+ reg = <1>;
- usb_0_dwc3_ss: endpoint {
- remote-endpoint = <&usb_0_qmpphy_usb_ss_in>;
- };
+ usb_0_dwc3_ss: endpoint {
+ remote-endpoint = <&usb_0_qmpphy_usb_ss_in>;
};
};
};
};
- usb_1: usb@a8f8800 {
- compatible = "qcom,sc8280xp-dwc3", "qcom,dwc3";
- reg = <0 0x0a8f8800 0 0x400>;
- #address-cells = <2>;
- #size-cells = <2>;
- ranges;
+ usb_1: usb@a800000 {
+ compatible = "qcom,sc8280xp-dwc3", "qcom,snps-dwc3";
+ reg = <0 0x0a800000 0 0xfc100>;
clocks = <&gcc GCC_CFG_NOC_USB3_SEC_AXI_CLK>,
<&gcc GCC_USB30_SEC_MASTER_CLK>,
@@ -4126,12 +4111,14 @@ usb_1: usb@a8f8800 {
<&gcc GCC_USB30_SEC_MASTER_CLK>;
assigned-clock-rates = <19200000>, <200000000>;
- interrupts-extended = <&intc GIC_SPI 811 IRQ_TYPE_LEVEL_HIGH>,
+ interrupts-extended = <&intc GIC_SPI 810 IRQ_TYPE_LEVEL_HIGH>,
+ <&intc GIC_SPI 811 IRQ_TYPE_LEVEL_HIGH>,
<&intc GIC_SPI 790 IRQ_TYPE_LEVEL_HIGH>,
<&pdc 12 IRQ_TYPE_EDGE_BOTH>,
<&pdc 13 IRQ_TYPE_EDGE_BOTH>,
<&pdc 136 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "pwr_event",
+ interrupt-names = "dwc_usb3",
+ "pwr_event",
"hs_phy_irq",
"dp_hs_phy_irq",
"dm_hs_phy_irq",
@@ -4148,35 +4135,30 @@ usb_1: usb@a8f8800 {
wakeup-source;
- status = "disabled";
+ iommus = <&apps_smmu 0x860 0x0>;
+ phys = <&usb_1_hsphy>, <&usb_1_qmpphy QMP_USB43DP_USB3_PHY>;
+ phy-names = "usb2-phy", "usb3-phy";
+ snps,dis-u1-entry-quirk;
+ snps,dis-u2-entry-quirk;
- usb_1_dwc3: usb@a800000 {
- compatible = "snps,dwc3";
- reg = <0 0x0a800000 0 0xcd00>;
- interrupts = <GIC_SPI 810 IRQ_TYPE_LEVEL_HIGH>;
- iommus = <&apps_smmu 0x860 0x0>;
- phys = <&usb_1_hsphy>, <&usb_1_qmpphy QMP_USB43DP_USB3_PHY>;
- phy-names = "usb2-phy", "usb3-phy";
- snps,dis-u1-entry-quirk;
- snps,dis-u2-entry-quirk;
+ status = "disabled";
- ports {
- #address-cells = <1>;
- #size-cells = <0>;
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
- port@0 {
- reg = <0>;
+ port@0 {
+ reg = <0>;
- usb_1_dwc3_hs: endpoint {
- };
+ usb_1_dwc3_hs: endpoint {
};
+ };
- port@1 {
- reg = <1>;
+ port@1 {
+ reg = <1>;
- usb_1_dwc3_ss: endpoint {
- remote-endpoint = <&usb_1_qmpphy_usb_ss_in>;
- };
+ usb_1_dwc3_ss: endpoint {
+ remote-endpoint = <&usb_1_qmpphy_usb_ss_in>;
};
};
};
---
base-commit: 735d2f48cadaa9a87e7c7601667878de70c771c5
change-id: 20260507-sc8280xp-flatten-dwc3-2151039b64ba
Best regards,
--
Xilin Wu <sophon@xxxxxxxxx>