[PATCH 1/2] dt-bindings: PCI: qcom: Document the Hawi PCIe Controller
From: Matthew Leung
Date: Thu May 07 2026 - 21:02:46 EST
Add a dedicated schema for the PCIe controllers found on the Hawi
platform.
Signed-off-by: Matthew Leung <matthew.leung@xxxxxxxxxxxxxxxx>
---
.../devicetree/bindings/pci/qcom,hawi-pcie.yaml | 188 +++++++++++++++++++++
1 file changed, 188 insertions(+)
diff --git a/Documentation/devicetree/bindings/pci/qcom,hawi-pcie.yaml b/Documentation/devicetree/bindings/pci/qcom,hawi-pcie.yaml
new file mode 100644
index 000000000000..154bc88e5969
--- /dev/null
+++ b/Documentation/devicetree/bindings/pci/qcom,hawi-pcie.yaml
@@ -0,0 +1,188 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pci/qcom,hawi-pcie.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Hawi PCI Express Root Complex
+
+maintainers:
+ - Bjorn Andersson <andersson@xxxxxxxxxx>
+ - Manivannan Sadhasivam <mani@xxxxxxxxxx>
+
+description:
+ Qualcomm Hawi SoC (and compatible) PCIe root complex controller is based on
+ the Synopsys DesignWare PCIe IP.
+
+properties:
+ compatible:
+ const: qcom,hawi-pcie
+
+ reg:
+ minItems: 5
+ maxItems: 6
+
+ reg-names:
+ minItems: 5
+ items:
+ - const: parf # Qualcomm specific registers
+ - const: dbi # DesignWare PCIe registers
+ - const: elbi # External local bus interface registers
+ - const: atu # ATU address space
+ - const: config # PCIe configuration space
+ - const: mhi # MHI registers
+
+ clocks:
+ maxItems: 7
+
+ clock-names:
+ minItems: 6
+ items:
+ - const: aux # Auxiliary clock
+ - const: cfg # Configuration clock
+ - const: bus_master # Master AXI clock
+ - const: bus_slave # Slave AXI clock
+ - const: slave_q2a # Slave Q2A clock
+ - const: noc_aggr # Aggre NoC PCIe AXI clock
+ - const: cnoc_sf_axi # Config NoC PCIe0 AXI clock
+
+ interrupts:
+ minItems: 8
+ maxItems: 9
+
+ interrupt-names:
+ minItems: 8
+ items:
+ - const: msi0
+ - const: msi1
+ - const: msi2
+ - const: msi3
+ - const: msi4
+ - const: msi5
+ - const: msi6
+ - const: msi7
+ - const: global
+
+ resets:
+ minItems: 1
+ maxItems: 2
+
+ reset-names:
+ minItems: 1
+ items:
+ - const: pci # PCIe core reset
+ - const: link_down # PCIe link down reset
+
+required:
+ - power-domains
+ - resets
+ - reset-names
+
+allOf:
+ - $ref: qcom,pcie-common.yaml#
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/qcom,hawi-gcc.h>
+ #include <dt-bindings/gpio/gpio.h>
+ #include <dt-bindings/interconnect/qcom,icc.h>
+ #include <dt-bindings/interconnect/qcom,hawi-rpmh.h>
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+ soc {
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ pcie@1c00000 {
+ compatible = "qcom,hawi-pcie";
+ reg = <0 0x01c00000 0 0x3000>,
+ <0 0x40000000 0 0xf1d>,
+ <0 0x40000f20 0 0xa8>,
+ <0 0x40001000 0 0x1000>,
+ <0 0x40100000 0 0x100000>;
+ reg-names = "parf", "dbi", "elbi", "atu", "config";
+ ranges = <0x01000000 0x0 0x00000000 0x0 0x40200000 0x0 0x100000>,
+ <0x02000000 0x0 0x40300000 0x0 0x40300000 0x0 0x3d00000>;
+
+ bus-range = <0x00 0xff>;
+ device_type = "pci";
+ linux,pci-domain = <0>;
+ num-lanes = <2>;
+
+ #address-cells = <3>;
+ #size-cells = <2>;
+
+ clocks = <&gcc GCC_PCIE_0_AUX_CLK>,
+ <&gcc GCC_PCIE_0_CFG_AHB_CLK>,
+ <&gcc GCC_PCIE_0_MSTR_AXI_CLK>,
+ <&gcc GCC_PCIE_0_SLV_AXI_CLK>,
+ <&gcc GCC_PCIE_0_SLV_Q2A_AXI_CLK>,
+ <&gcc GCC_AGGRE_NOC_PCIE_AXI_CLK>,
+ <&gcc GCC_CNOC_PCIE_SF_AXI_CLK>;
+ clock-names = "aux",
+ "cfg",
+ "bus_master",
+ "bus_slave",
+ "slave_q2a",
+ "noc_aggr",
+ "cnoc_sf_axi";
+
+ dma-coherent;
+
+ interrupts = <GIC_ESPI 205 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_ESPI 206 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_ESPI 207 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_ESPI 208 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_ESPI 209 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_ESPI 210 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_ESPI 211 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_ESPI 212 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_ESPI 204 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "msi0", "msi1", "msi2", "msi3",
+ "msi4", "msi5", "msi6", "msi7", "global";
+ #interrupt-cells = <1>;
+ interrupt-map-mask = <0 0 0 0x7>;
+ interrupt-map = <0 0 0 1 &intc 0 0 GIC_ESPI 213 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
+ <0 0 0 2 &intc 0 0 GIC_ESPI 214 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
+ <0 0 0 3 &intc 0 0 GIC_ESPI 215 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
+ <0 0 0 4 &intc 0 0 GIC_ESPI 216 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
+
+ interconnects = <&pcie_anoc MASTER_PCIE_0 QCOM_ICC_TAG_ALWAYS
+ &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>,
+ <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+ &cnoc_main SLAVE_PCIE_0 QCOM_ICC_TAG_ACTIVE_ONLY>;
+ interconnect-names = "pcie-mem", "cpu-pcie";
+
+ iommu-map = <0x0 &apps_smmu 0x1000 0x1>,
+ <0x100 &apps_smmu 0x1001 0x1>;
+
+ pinctrl-0 = <&pcie0_default_state>;
+ pinctrl-names = "default";
+
+ power-domains = <&gcc GCC_PCIE_0_PHY_GDSC>;
+
+ resets = <&gcc GCC_PCIE_0_BCR>,
+ <&gcc GCC_PCIE_0_LINK_DOWN_BCR>;
+ reset-names = "pci", "link_down";
+
+ msi-map = <0x0 &gic_its 0x1000 0x1>,
+ <0x100 &gic_its 0x1001 0x1>;
+ msi-map-mask = <0xff00>;
+
+ pcie@0 {
+ device_type = "pci";
+ reg = <0x0 0x0 0x0 0x0 0x0>;
+ bus-range = <0x01 0xff>;
+
+ #address-cells = <3>;
+ #size-cells = <2>;
+ ranges;
+
+ phys = <&pcie0_phy>;
+ wake-gpios = <&tlmm 104 GPIO_ACTIVE_HIGH>;
+ reset-gpios = <&tlmm 102 GPIO_ACTIVE_LOW>;
+ };
+ };
+ };
--
2.34.1