Re: [PATCH 1/2] iio: adc: qcom-spmi-adc5-gen3: Share SDAM0 IRQ with ADC_TM auxiliary driver

[Andy Shevchenko]

On Fri, May 15, 2026 at 02:23:44PM +0530, Jishnu Prakash wrote:
> The SDAM0 IRQ can be triggered for both EOC (end of conversion) events for
> immediate ADC reads done in this driver and for threshold violation events,
> based on ADC_TM thresholds configured from the auxiliary ADC_TM driver on
> TM channels on the first SDAM.
> 
> At present, this interrupt is handled only in the ISR in the main ADC driver.
> When the ISR is triggered for an ADC_TM event, this driver notifies the ADC_TM
> driver by calling a notifier callback exposed from it for this purpose.
> 
> To simplify the interrupt handling in both drivers, share the interrupt between
> the drivers. With this, ADC_TM interrupts on SDAM0 will be handled directly in

"will"?! Do you mean this patch deliberately breaks the working setups?

> the ADC_TM driver, so remove the notifier callback and all TM interrupt
> handling in the main ADC ISR.

-- 
With Best Regards,
Andy Shevchenko