[PATCH] iio: gyro: mpu3050: use devm_iio_trigger_register

[lixinyu]

mpu3050_trigger_probe() allocates the DRDY trigger with
devm_iio_trigger_alloc() but registers it with plain
iio_trigger_register(). The remove callback calls free_irq()
on the trigger but never calls iio_trigger_unregister(), so on
module unload the trigger remains in the global trigger list
while its memory is freed by devm, leaving a dangling entry.

Switch to devm_iio_trigger_register() so the registration is
undone automatically in the same devm scope as the allocation.

Fixes: 3904b28efb2c ("iio: gyro: Add driver for the MPU-3050 gyroscope")
Cc: stable@xxxxxxxxxxxxxxx
Signed-off-by: lixinyu <xinyuili@xxxxxxx>
---
 drivers/iio/gyro/mpu3050-core.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/iio/gyro/mpu3050-core.c b/drivers/iio/gyro/mpu3050-core.c
index d84e04e4b431..bcfa83a46737 100644
--- a/drivers/iio/gyro/mpu3050-core.c
+++ b/drivers/iio/gyro/mpu3050-core.c
@@ -1127,7 +1127,7 @@ static int mpu3050_trigger_probe(struct iio_dev *indio_dev, int irq)
 	mpu3050->trig->ops = &mpu3050_trigger_ops;
 	iio_trigger_set_drvdata(mpu3050->trig, indio_dev);
 
-	ret = iio_trigger_register(mpu3050->trig);
+	ret = devm_iio_trigger_register(mpu3050->dev, mpu3050->trig);
 	if (ret)
 		goto err_iio_trigger;
 
-- 
2.34.1