[PATCH v2 6/8] drm/sun4i: hdmi: Use the common TMDS char rate constant

[Javier Martinez Canillas]

Replace the 165000000 magic number with the shared constant defined
in the <linux/hdmi.h> header.

The old comment referenced "HDMI <= 1.2" but 165 MHz is actually
the maximum TMDS character rate defined by the HDMI 1.0 spec.

Suggested-by: Maxime Ripard <mripard@xxxxxxxxxx>
Signed-off-by: Javier Martinez Canillas <javierm@xxxxxxxxxx>
Reviewed-by: Chen-Yu Tsai <wens@xxxxxxxxxx>
---

(no changes since v1)

 drivers/gpu/drm/sun4i/sun4i_hdmi_enc.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/gpu/drm/sun4i/sun4i_hdmi_enc.c b/drivers/gpu/drm/sun4i/sun4i_hdmi_enc.c
index 07e2afcb4f95..74c7c3720ba8 100644
--- a/drivers/gpu/drm/sun4i/sun4i_hdmi_enc.c
+++ b/drivers/gpu/drm/sun4i/sun4i_hdmi_enc.c
@@ -189,8 +189,8 @@ sun4i_hdmi_connector_clock_valid(const struct drm_connector *connector,
 	if (mode->flags & DRM_MODE_FLAG_DBLCLK)
 		return MODE_BAD;
 
-	/* 165 MHz is the typical max pixelclock frequency for HDMI <= 1.2 */
-	if (clock > 165000000)
+	/* HDMI 1.0 max TMDS character rate */
+	if (clock > HDMI_1_0_TMDS_CHAR_RATE_MAX_HZ)
 		return MODE_CLOCK_HIGH;
 
 	rounded_rate = clk_round_rate(hdmi->tmds_clk, clock);
-- 
2.54.0