Re: [PATCH v2 1/2] dt-bindings: remoteproc: qcom,shikra-pas: Document Shikra PAS remoteprocs

[Krzysztof Kozlowski]

On Wed, May 20, 2026 at 08:08:05PM +0530, Komal Bajaj wrote:
> +  glink-edge:
> +    $ref: /schemas/remoteproc/qcom,glink-edge.yaml#
> +    description:
> +      Qualcomm G-Link subnode which represents communication edge, channels
> +      and devices related to the remoteproc core.
> +    unevaluatedProperties: false
> +
> +  qcom,smem-states:
> +    $ref: /schemas/types.yaml#/definitions/phandle-array
> +    description: States used by the AP to signal the Hexagon core
> +    items:
> +      - description: Stop the remote processor

You again got the warning here. It must be solved, don't send the same.

See thread:
https://lore.kernel.org/all/20260421195836.1547469-1-robh@xxxxxxxxxx/


> +
> +  qcom,smem-state-names:
> +    description: The names of the state bits used for SMP2P output
> +    items:
> +      - const: stop
> +
> +required:
> +  - compatible
> +  - reg
> +  - memory-region
> +
> +allOf:
> +  - $ref: /schemas/remoteproc/qcom,pas-common.yaml#
> +
> +  - if:
> +      properties:
> +        compatible:
> +          enum:
> +            - qcom,shikra-cdsp-pas
> +            - qcom,shikra-mpss-pas
> +    then:
> +      properties:
> +        interrupts:
> +          minItems: 6
> +        interrupt-names:
> +          minItems: 6
> +        memory-region:
> +          maxItems: 1
> +        firmware-name:
> +          maxItems: 1
> +        power-domains:
> +          items:
> +            - description: CX power domain
> +        power-domain-names:
> +          items:
> +            - const: cx
> +
> +  - if:
> +      properties:
> +        compatible:
> +          enum:
> +            - qcom,shikra-lpaicp-pas
> +    then:
> +      properties:
> +        interrupts:
> +          maxItems: 5
> +        interrupt-names:
> +          maxItems: 5
> +        memory-region:
> +          minItems: 2
> +        firmware-name:
> +          minItems: 2

power-domains: false
power-domain-names: false

> +
> +unevaluatedProperties: false
> +
> +examples:
> +  - |
> +    #include <dt-bindings/clock/qcom,rpmcc.h>
> +    #include <dt-bindings/interconnect/qcom,icc.h>
> +    #include <dt-bindings/interconnect/qcom,rpm-icc.h>
> +    #include <dt-bindings/interconnect/qcom,shikra.h>
> +    #include <dt-bindings/interrupt-controller/arm-gic.h>
> +    #include <dt-bindings/interrupt-controller/irq.h>
> +    #include <dt-bindings/power/qcom-rpmpd.h>
> +
> +    remoteproc@b300000 {
> +        compatible = "qcom,shikra-cdsp-pas";
> +        reg = <0x0b300000 0x100000>;
> +
> +        interrupts-extended = <&intc GIC_SPI 265 IRQ_TYPE_EDGE_RISING>,
> +                              <&cdsp_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
> +                              <&cdsp_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
> +                              <&cdsp_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
> +                              <&cdsp_smp2p_in 3 IRQ_TYPE_EDGE_RISING>,
> +                              <&cdsp_smp2p_in 7 IRQ_TYPE_EDGE_RISING>;
> +        interrupt-names = "wdog", "fatal", "ready",
> +                          "handover", "stop-ack", "shutdown-ack";
> +
> +        clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>;
> +        clock-names = "xo";
> +
> +        interconnects = <&mem_noc MASTER_AMPSS_M0 RPM_ALWAYS_TAG
> +                         &mc_virt SLAVE_EBI_CH0 RPM_ALWAYS_TAG>;
> +
> +        power-domains = <&rpmpd RPMHPD_CX>;
> +        power-domain-names = "cx";
> +
> +        memory-region = <&cdsp_mem>;
> +
> +        qcom,smem-states = <&cdsp_smp2p_out 0>;
> +        qcom,smem-state-names = "stop";

Missing firmware-name

> +
> +        glink-edge {
> +            interrupts = <GIC_SPI 261 IRQ_TYPE_EDGE_RISING>;
> +            mboxes = <&apcs_glb 4>;
> +            qcom,remote-pid = <5>;
> +            label = "cdsp";
> +        };
> +    };
> 
> -- 
> 2.34.1
>