[PATCH 13/18] arm64: dts: qcom: sar2130p: Fix PCIe wake GPIO polarity

[Krishna Chaitanya Chundru]

The PCIe WAKE# signal is active-low as defined in the PCIe Base
Specification. Fix the wake-gpios polarity by using GPIO_ACTIVE_LOW
instead of GPIO_ACTIVE_HIGH.

Signed-off-by: Krishna Chaitanya Chundru <krishna.chundru@xxxxxxxxxxxxxxxx>
Reviewed-by: Konrad Dybcio <konrad.dybcio@xxxxxxxxxxxxxxxx>
Reviewed-by: Manivannan Sadhasivam <mani@xxxxxxxxxx>
---
 arch/arm64/boot/dts/qcom/sar2130p-qar2130p.dts | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm64/boot/dts/qcom/sar2130p-qar2130p.dts b/arch/arm64/boot/dts/qcom/sar2130p-qar2130p.dts
index 74778a5b19ba..71a09e76b359 100644
--- a/arch/arm64/boot/dts/qcom/sar2130p-qar2130p.dts
+++ b/arch/arm64/boot/dts/qcom/sar2130p-qar2130p.dts
@@ -358,7 +358,7 @@ &i2c10 {
 
 &pcie0 {
 	perst-gpios = <&tlmm 55 GPIO_ACTIVE_LOW>;
-	wake-gpios = <&tlmm 57 GPIO_ACTIVE_HIGH>;
+	wake-gpios = <&tlmm 57 GPIO_ACTIVE_LOW>;
 
 	pinctrl-0 = <&pcie0_default_state>;
 	pinctrl-names = "default";

-- 
2.34.1