[PATCH] serial: 8250_omap: clear rx_running on zero-length DMA completes

[Matthias Feser]

On AM33xx RX DMA only triggers when the FIFO reaches the
configured threshold (typically 48 bytes). For smaller bursts
no DMA request is issued and the FIFO is drained by RX timeout.

In this case __dma_rx_do_complete() can legitimately see count == 0.

The current code exits early in this case and does not clear
dma->rx_running, leaving the DMA state inconsistent. This can
prevent RX DMA from restarting and may cause
omap_8250_rx_dma_flush() to fail, marking DMA as broken.

Fix this by always clearing dma->rx_running on exit.

Signed-off-by: Matthias Feser <mfe@xxxxxxxxxxxxxxxxxxxxxxxxx>
---
 drivers/tty/serial/8250/8250_omap.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/tty/serial/8250/8250_omap.c b/drivers/tty/serial/8250/8250_omap.c
index c552c6b9a037..686e54859aa5 100644
--- a/drivers/tty/serial/8250/8250_omap.c
+++ b/drivers/tty/serial/8250/8250_omap.c
@@ -948,11 +948,11 @@ static void __dma_rx_do_complete(struct uart_8250_port *p)
 		goto out;
 	ret = tty_insert_flip_string(tty_port, dma->rx_buf, count);
 
-	dma->rx_running = 0;
 	p->port.icount.rx += ret;
 	p->port.icount.buf_overrun += count - ret;
 out:
 
+	dma->rx_running = 0;
 	tty_flip_buffer_push(tty_port);
 }
 
-- 
2.39.5