Re: [PATCH v2 08/10] arm64: dts: renesas: r9a07g0{43,44,54}: remove TCIU8 interrupt from MTU3

[Geert Uytterhoeven]

Hi Cosmin,

On Thu, 21 May 2026 at 15:54, Cosmin-Gabriel Tanislav
<cosmin-gabriel.tanislav.xa@xxxxxxxxxxx> wrote:
> Hi Geert, is it too late in the cycle for this to be picked up for 7.2?

No, it is not.

> > From: Cosmin Tanislav <cosmin-gabriel.tanislav.xa@xxxxxxxxxxx>
> > Sent: Friday, April 10, 2026 7:35 PM
> >
> > The TCIU8 interrupt used to be documented in earlier revisions of the
> > user manuals, but has since been removed. The corresponding entry is now
> > marked as reserved in the interrupt mapping tables of all supported
> > SoCs.
> >
> >  * Page 486, Table 8.2 Interrupt mapping (7/13) in the Renesas RZ/G2UL
> >    Rev.1.40 User Manual
> >  * Page 363, Table 8.2 Interrupt Mapping (6/13) in the Renesas RZ/Five
> >    Rev.1.30 User Manual
> >  * Page 528, Table 8.2 Interrupt mapping (7/13) in the Renesas RZ/G2L
> >    and RZ/G2LC Rev.1.50 User Manual
> >  * Page 540, Table 8.2 Interrupt mapping (7/13) in the Renesas RZ/V2L
> >    Rev.1.50 User Manual
> >
> > Remove the TCIU8 interrupt. This does not cause any breakage as the
> > driver does not make use of the interrupts.
> >
> > Signed-off-by: Cosmin Tanislav <cosmin-gabriel.tanislav.xa@xxxxxxxxxxx>

Gr{oetje,eeting}s,

                        Geert

-- 
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@xxxxxxxxxxxxxx

In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
                                -- Linus Torvalds