Re: [PATCH] arm64: dts: glymur-crd: Add reset GPIO to touchscreen node

[Konrad Dybcio]

On 5/22/26 11:56 AM, Pradyot Kumar Nayak wrote:
> The touchscreen module on Glymur/Mahua CRDs is different from the one
> used on Hamoa CRDs and requires the reset-gpios to be wired to the device.
> Without this in place the reset line will remain permanently asserted
> during resume leaving the device offline and causing all I2C transactions
> to fail with -ENXIO.
> 
> Error Logs:
> i2c_hid_of 3-0038: failed to change power setting.
> i2c_hid_of 3-0038: PM: dpm_run_callback(): i2c_hid_core_pm_resume [i2c_hid] returns -6
> i2c_hid_of 3-0038: PM: failed to resume async: error -6
> 
> Add the reset GPIO so the driver can deassert the line on resume,
> restoring I2C communication with the device.
> 
> Fixes: e6bf559f7eb9 ("arm64: dts: qcom: glymur-crd: Enable keyboard, trackpad and touchscreen")
> Signed-off-by: Pradyot Kumar Nayak <pradyot.nayak@xxxxxxxxxxxxxxxx>
> ---

Reviewed-by: Konrad Dybcio <konrad.dybcio@xxxxxxxxxxxxxxxx>

Konrad