Re: [PATCH v2] arm64: dts: monaco-arduino-monza: Add Bluetooth UART node

[Bjorn Andersson]

On Wed, 29 Apr 2026 18:35:37 +0800, Shuai Zhang wrote:
> The QCA2066 Bluetooth chip is powered by a board-level 3.3 V supply
> provided by the hardware. This change connects the Bluetooth
> controller via UART10, and the corresponding GPIO is used to enable
> the Bluetooth chip.
> 
> basic function test step:
>  - bluetoothctl power on/off
>  - bluetoothctl scan bredr/le
>  - bluetoothctl pair <remote device address>
>  - bluetoothctl connect <remote device address>
> 
> [...]

Applied, thanks!

[1/1] arm64: dts: monaco-arduino-monza: Add Bluetooth UART node
      commit: 0299c007e6f34a2a5b724c332b86be77409ea729

Best regards,
-- 
Bjorn Andersson <andersson@xxxxxxxxxx>