[PATCH v8 1/2] dt-bindings: phy: qcom: Add CSI2 C-PHY/DPHY schema

[Bryan O'Donoghue]

Add a base schema initially compatible with x1e80100 to describe MIPI CSI2
PHY devices.

The hardware can support both CPHY, DPHY and a special split-mode DPHY.

The schema here defines three ports:

port@0:
    The first input port where a sensor is always required.

port@1:
    A second optional input port which if present implies DPHY split-mode.

port@2:
    A third always required output port which connects to the controller.

The CSIPHY devices have their own pinouts on the SoC as well as their own
individual voltage rails.

The need to model voltage rails on a per-PHY basis leads us to define
CSIPHY devices as individual nodes.

Two nice outcomes in terms of schema and DT arise from this change.

1. The ability to define on a per-PHY basis voltage rails.
2. The ability to require those voltage.

We have had a complete bodge upstream for this where a single set of
voltage rail for all CSIPHYs has been buried inside of CAMSS.

Much like the I2C bus which is dedicated to Camera sensors - the CCI bus in
CAMSS parlance, the CSIPHY devices should be individually modelled.

Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@xxxxxxxxxx>
---
 .../bindings/phy/qcom,x1e80100-csi2-phy.yaml       | 209 +++++++++++++++++++++
 1 file changed, 209 insertions(+)

diff --git a/Documentation/devicetree/bindings/phy/qcom,x1e80100-csi2-phy.yaml b/Documentation/devicetree/bindings/phy/qcom,x1e80100-csi2-phy.yaml
new file mode 100644
index 0000000000000..270375f949880
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/qcom,x1e80100-csi2-phy.yaml
@@ -0,0 +1,209 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/phy/qcom,x1e80100-csi2-phy.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm CSI2 PHY
+
+maintainers:
+  - Bryan O'Donoghue <bod@xxxxxxxxxx>
+
+description:
+  Qualcomm MIPI CSI2 C-PHY/D-PHY combination PHY. Connects MIPI CSI2 sensors
+  to Qualcomm's Camera CSI Decoder. The PHY supports both C-PHY and D-PHY
+  modes.
+
+properties:
+  compatible:
+    const: qcom,x1e80100-csi2-phy
+
+  reg:
+    maxItems: 1
+
+  "#phy-cells":
+    const: 1
+    description:
+      The single cell specifies the PHY operating mode.
+
+  clocks:
+    maxItems: 2
+
+  clock-names:
+    items:
+      - const: core
+      - const: timer
+
+  interrupts:
+    maxItems: 1
+
+  operating-points-v2:
+    maxItems: 1
+
+  power-domains:
+    items:
+      - description: MMCX voltage rail
+      - description: MXC or MXA voltage rail
+
+  power-domain-names:
+    items:
+      - const: mmcx
+      - const: mx
+
+  vdda-0p9-supply:
+    description: Phandle to a 0.9V regulator supply to a PHY.
+
+  vdda-1p2-supply:
+    description: Phandle to 1.2V regulator supply to a PHY.
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+
+    properties:
+      port@0:
+        $ref: /schemas/graph.yaml#/$defs/port-base
+        description: Sensor input. Always present.
+        unevaluatedProperties: false
+
+        properties:
+          endpoint:
+            $ref: /schemas/media/video-interfaces.yaml#
+            unevaluatedProperties: false
+            properties:
+              data-lanes:
+                minItems: 1
+                maxItems: 4
+              clock-lanes:
+                maxItems: 1
+              remote-endpoint: true
+            required:
+              - data-lanes
+              - remote-endpoint
+
+      port@1:
+        $ref: /schemas/graph.yaml#/$defs/port-base
+        description:
+          Second sensor input. When present, indicates DPHY split mode.
+        unevaluatedProperties: false
+
+        properties:
+          endpoint:
+            $ref: /schemas/media/video-interfaces.yaml#
+            unevaluatedProperties: false
+            properties:
+              data-lanes:
+                maxItems: 1
+              clock-lanes:
+                maxItems: 1
+              remote-endpoint: true
+            required:
+              - data-lanes
+              - clock-lanes
+              - remote-endpoint
+
+      port@2:
+        $ref: /schemas/graph.yaml#/$defs/port-base
+        description: Output to CAMSS controller.
+        unevaluatedProperties: false
+
+        properties:
+          endpoint:
+            $ref: /schemas/graph.yaml#/$defs/endpoint-base
+            unevaluatedProperties: false
+            properties:
+              remote-endpoint: true
+            required:
+              - remote-endpoint
+
+    required:
+      - port@0
+      - port@2
+
+required:
+  - compatible
+  - reg
+  - "#phy-cells"
+  - clocks
+  - clock-names
+  - interrupts
+  - operating-points-v2
+  - power-domains
+  - power-domain-names
+  - vdda-0p9-supply
+  - vdda-1p2-supply
+  - ports
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/clock/qcom,x1e80100-camcc.h>
+    #include <dt-bindings/clock/qcom,x1e80100-gcc.h>
+    #include <dt-bindings/power/qcom,rpmhpd.h>
+
+    csiphy4: csiphy@ace4000 {
+        compatible = "qcom,x1e80100-csi2-phy";
+        reg = <0x0ace4000 0x2000>;
+        #phy-cells = <1>;
+
+        clocks = <&camcc CAM_CC_CSIPHY0_CLK>,
+                 <&camcc CAM_CC_CSI0PHYTIMER_CLK>;
+        clock-names = "core",
+                      "timer";
+
+        operating-points-v2 = <&csiphy_opp_table>;
+
+        interrupts = <GIC_SPI 477 IRQ_TYPE_EDGE_RISING>;
+
+        power-domains = <&rpmhpd RPMHPD_MMCX>,
+                        <&rpmhpd RPMHPD_MX>;
+        power-domain-names = "mmcx",
+                             "mx";
+
+        vdda-0p9-supply = <&vreg_l2c_0p8>;
+        vdda-1p2-supply = <&vreg_l1c_1p2>;
+
+        ports {
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            port@0 {
+                reg = <0>;
+                csiphy0_in_ep: endpoint {
+                    data-lanes = <0 1>;
+                    clock-lanes = <2>;
+                    remote-endpoint = <&sensor_out>;
+                };
+            };
+
+            port@2 {
+                reg = <2>;
+                csiphy0_out_ep: endpoint {
+                    remote-endpoint = <&controller_in>;
+                };
+            };
+        };
+    };
+
+    csiphy_opp_table: opp-table {
+        compatible = "operating-points-v2";
+
+        opp-300000000 {
+            opp-hz = /bits/ 64 <300000000>;
+            required-opps = <&rpmhpd_opp_low_svs_d1>,
+                            <&rpmhpd_opp_low_svs_d1>;
+        };
+
+        opp-400000000 {
+            opp-hz = /bits/ 64 <400000000>;
+            required-opps = <&rpmhpd_opp_low_svs>,
+                            <&rpmhpd_opp_low_svs_d1>;
+        };
+
+        opp-480000000 {
+            opp-hz = /bits/ 64 <480000000>;
+            required-opps = <&rpmhpd_opp_low_svs>,
+                            <&rpmhpd_opp_low_svs_d1>;
+        };
+    };

-- 
2.54.0