[PATCH 03/16] arm64: dts: qcom: Add QUPv3 configuration for Shikra

From: Komal Bajaj

Date: Sun May 24 2026 - 15:50:27 EST

From: Xueyao An <xueyao.an@xxxxxxxxxxxxxxxx>

Add device tree support for QUPv3 serial engine protocols on Shikra.
Shikra has 10 QUP serial engines under a single QUP wrapper, all with
support of GPI DMA engines.

Signed-off-by: Xueyao An <xueyao.an@xxxxxxxxxxxxxxxx>
Signed-off-by: Komal Bajaj <komal.bajaj@xxxxxxxxxxxxxxxx>
---
arch/arm64/boot/dts/qcom/shikra.dtsi | 951 +++++++++++++++++++++++++++++++++++
1 file changed, 951 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/shikra.dtsi b/arch/arm64/boot/dts/qcom/shikra.dtsi
index a4334d99c1f3..2751b4f89678 100644
--- a/arch/arm64/boot/dts/qcom/shikra.dtsi
+++ b/arch/arm64/boot/dts/qcom/shikra.dtsi
@@ -6,6 +6,7 @@
#include <dt-bindings/clock/qcom,rpmcc.h>
#include <dt-bindings/clock/qcom,shikra-gcc.h>
#include <dt-bindings/interconnect/qcom,icc.h>
+#include <dt-bindings/dma/qcom-gpi.h>
#include <dt-bindings/interconnect/qcom,rpm-icc.h>
#include <dt-bindings/interconnect/qcom,shikra.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
@@ -348,6 +349,161 @@ tlmm: pinctrl@500000 {
gpio-ranges = <&tlmm 0 0 165>;
wakeup-parent = <&mpm>;

+ qup_i2c0_data_clk: qup-i2c0-data-clk-state {
+ /* SDA, SCL */
+ pins = "gpio2", "gpio3";
+ function = "qup0_se0";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+
+ qup_i2c1_data_clk: qup-i2c1-data-clk-state {
+ /* SDA, SCL */
+ pins = "gpio4", "gpio5";
+ function = "qup0_se1_01";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+
+ qup_i2c2_data_clk: qup-i2c2-data-clk-state {
+ /* SDA, SCL */
+ pins = "gpio6", "gpio7";
+ function = "qup0_se2";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+
+ qup_i2c3_data_clk: qup-i2c3-data-clk-state {
+ /* SDA, SCL */
+ pins = "gpio10", "gpio11";
+ function = "qup0_se3_01";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+
+ qup_i2c4_data_clk: qup-i2c4-data-clk-state {
+ /* SDA, SCL */
+ pins = "gpio12", "gpio13";
+ function = "qup0_se4_01";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+
+ qup_i2c5_data_clk: qup-i2c5-data-clk-state {
+ /* SDA, SCL */
+ pins = "gpio14", "gpio15";
+ function = "qup0_se5";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+
+ qup_i2c6_data_clk: qup-i2c6-data-clk-state {
+ /* SDA, SCL */
+ pins = "gpio18", "gpio19";
+ function = "qup0_se6";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+
+ qup_i2c7_data_clk: qup-i2c7-data-clk-state {
+ /* SDA, SCL */
+ pins = "gpio20", "gpio21";
+ function = "qup0_se7_01";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+
+ qup_i2c8_data_clk: qup-i2c8-data-clk-state {
+ /* SDA, SCL */
+ pins = "gpio22", "gpio23";
+ function = "qup0_se8";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+
+ qup_i2c9_data_clk: qup-i2c9-data-clk-state {
+ /* SDA, SCL */
+ pins = "gpio27", "gpio26";
+ function = "qup0_se9_01";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+
+ qup_spi0_cs: qup-spi0-cs-state {
+ pins = "gpio1";
+ function = "qup0_se0";
+ drive-strength = <6>;
+ bias-disable;
+ };
+
+ qup_spi0_data_clk: qup-spi0-data-clk-state {
+ /* MISO, MOSI, CLK */
+ pins = "gpio2", "gpio3", "gpio0";
+ function = "qup0_se0";
+ drive-strength = <6>;
+ bias-disable;
+ };
+
+ qup_spi2_cs: qup-spi2-cs-state {
+ pins = "gpio9";
+ function = "qup0_se2";
+ drive-strength = <6>;
+ bias-disable;
+ };
+
+ qup_spi2_data_clk: qup-spi2-data-clk-state {
+ /* MISO, MOSI, CLK */
+ pins = "gpio6", "gpio7", "gpio8";
+ function = "qup0_se2";
+ drive-strength = <6>;
+ bias-disable;
+ };
+
+ qup_spi5_cs: qup-spi5-cs-state {
+ pins = "gpio17";
+ function = "qup0_se5";
+ drive-strength = <6>;
+ bias-disable;
+ };
+
+ qup_spi5_data_clk: qup-spi5-data-clk-state {
+ /* MISO, MOSI, CLK */
+ pins = "gpio14", "gpio15", "gpio16";
+ function = "qup0_se5";
+ drive-strength = <6>;
+ bias-disable;
+ };
+
+ qup_spi6_cs: qup-spi6-cs-state {
+ pins = "gpio29";
+ function = "qup0_se6";
+ drive-strength = <6>;
+ bias-disable;
+ };
+
+ qup_spi6_data_clk: qup-spi6-data-clk-state {
+ /* MISO, MOSI, CLK */
+ pins = "gpio18", "gpio19", "gpio28";
+ function = "qup0_se6";
+ drive-strength = <6>;
+ bias-disable;
+ };
+
+ qup_spi8_cs: qup-spi8-cs-state {
+ pins = "gpio25";
+ function = "qup0_se8";
+ drive-strength = <6>;
+ bias-disable;
+ };
+
+ qup_spi8_data_clk: qup-spi8-data-clk-state {
+ /* MISO, MOSI, CLK */
+ pins = "gpio22", "gpio23", "gpio24";
+ function = "qup0_se8";
+ drive-strength = <6>;
+ bias-disable;
+ };
+
qup_uart0_default: qup-uart0-default-state {
pins = "gpio0", "gpio1";
function = "qup0_se0";
@@ -355,6 +511,105 @@ qup_uart0_default: qup-uart0-default-state {
bias-disable;
};

+ qup_uart1_default: qup-uart1-default-state {
+ pins = "gpio4", "gpio5";
+ function = "qup0_se1_23";
+ drive-strength = <2>;
+ bias-disable;
+ };
+
+ qup_uart2_default: qup-uart2-default-state {
+ /* TX, RX */
+ pins = "gpio8", "gpio9";
+ function = "qup0_se2";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+
+ qup_uart2_cts_rts: qup-uart2-cts-rts-state {
+ /* CTS, RTS */
+ pins = "gpio6", "gpio7";
+ function = "qup0_se2";
+ drive-strength = <2>;
+ bias-pull-down;
+ };
+
+ qup_uart3_default: qup-uart3-default-state {
+ pins = "gpio10", "gpio11";
+ function = "qup0_se3_23";
+ drive-strength = <2>;
+ bias-disable;
+ };
+
+ qup_uart4_default: qup-uart4-default-state {
+ pins = "gpio12", "gpio13";
+ function = "qup0_se4_23";
+ drive-strength = <2>;
+ bias-disable;
+ };
+
+ qup_uart5_default: qup-uart5-default-state {
+ /* TX, RX */
+ pins = "gpio16", "gpio17";
+ function = "qup0_se5";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+
+ qup_uart5_cts_rts: qup-uart5-cts-rts-state {
+ /* CTS, RTS */
+ pins = "gpio14", "gpio15";
+ function = "qup0_se5";
+ drive-strength = <2>;
+ bias-pull-down;
+ };
+
+ qup_uart6_default: qup-uart6-default-state {
+ /* TX, RX */
+ pins = "gpio28", "gpio29";
+ function = "qup0_se6";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+
+ qup_uart6_cts_rts: qup-uart6-cts-rts-state {
+ /* CTS, RTS */
+ pins = "gpio18", "gpio19";
+ function = "qup0_se6";
+ drive-strength = <2>;
+ bias-pull-down;
+ };
+
+ qup_uart7_default: qup-uart7-default-state {
+ pins = "gpio20", "gpio21";
+ function = "qup0_se7_23";
+ drive-strength = <2>;
+ bias-disable;
+ };
+
+ qup_uart8_default: qup-uart8-default-state {
+ /* TX, RX */
+ pins = "gpio24", "gpio25";
+ function = "qup0_se8";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+
+ qup_uart8_cts_rts: qup-uart8-cts-rts-state {
+ /* CTS, RTS */
+ pins = "gpio22", "gpio23";
+ function = "qup0_se8";
+ drive-strength = <2>;
+ bias-pull-down;
+ };
+
+ qup_uart9_default: qup-uart9-default-state {
+ pins = "gpio26", "gpio27";
+ function = "qup0_se9_23";
+ drive-strength = <2>;
+ bias-disable;
+ };
+
sdc1_state_on: sdc1-on-state {
clk-pins {
pins = "sdc1_clk";
@@ -604,6 +859,34 @@ opp-384000000 {
};
};

+ gpi_dma0: dma-controller@4a00000 {
+ compatible = "qcom,shikra-gpi-dma", "qcom,sm6350-gpi-dma";
+ reg = <0x0 0x04a00000 0x0 0x60000>;
+
+ interrupts = <GIC_SPI 511 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 512 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 513 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 514 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 515 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 516 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 517 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 518 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 519 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 520 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 521 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 522 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 523 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 524 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 525 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 526 IRQ_TYPE_LEVEL_HIGH>;
+
+ dma-channels = <16>;
+ dma-channel-mask = <0xff>;
+ #dma-cells = <3>;
+
+ iommus = <&apps_smmu 0xf6 0x0>;
+ };
+
qupv3_0: geniqup@4ac0000 {
compatible = "qcom,geni-se-qup";
reg = <0x0 0x04ac0000 0x0 0x2000>;
@@ -613,10 +896,75 @@ qupv3_0: geniqup@4ac0000 {
clock-names = "m-ahb",
"s-ahb";

+ iommus = <&apps_smmu 0xe3 0x0>;
+
#address-cells = <2>;
#size-cells = <2>;
ranges;

+ status = "disabled";
+
+ i2c0: i2c@4a80000 {
+ compatible = "qcom,geni-i2c";
+ reg = <0x0 0x4a80000 0x0 0x4000>;
+
+ interrupts = <GIC_SPI 527 IRQ_TYPE_LEVEL_HIGH 0>;
+
+ clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>;
+ clock-names = "se";
+
+ interconnects = <&clk_virt MASTER_QUP_CORE_0 RPM_ALWAYS_TAG
+ &clk_virt SLAVE_QUP_CORE_0 RPM_ALWAYS_TAG>,
+ <&mem_noc MASTER_AMPSS_M0 RPM_ALWAYS_TAG
+ &config_noc SLAVE_QUP_0 RPM_ALWAYS_TAG>,
+ <&system_noc MASTER_QUP_0 RPM_ALWAYS_TAG
+ &mc_virt SLAVE_EBI_CH0 RPM_ALWAYS_TAG>;
+ interconnect-names = "qup-core",
+ "qup-config",
+ "qup-memory";
+
+ dmas = <&gpi_dma0 0 0 QCOM_GPI_I2C>,
+ <&gpi_dma0 1 0 QCOM_GPI_I2C>;
+ dma-names = "tx", "rx";
+
+ pinctrl-0 = <&qup_i2c0_data_clk>;
+ pinctrl-names = "default";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ status = "disabled";
+ };
+
+ spi0: spi@4a80000 {
+ compatible = "qcom,geni-spi";
+ reg = <0x0 0x4a80000 0x0 0x4000>;
+
+ interrupts = <GIC_SPI 527 IRQ_TYPE_LEVEL_HIGH 0>;
+
+ clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>;
+ clock-names = "se";
+
+ interconnects = <&clk_virt MASTER_QUP_CORE_0 RPM_ALWAYS_TAG
+ &clk_virt SLAVE_QUP_CORE_0 RPM_ALWAYS_TAG>,
+ <&mem_noc MASTER_AMPSS_M0 RPM_ALWAYS_TAG
+ &config_noc SLAVE_QUP_0 RPM_ALWAYS_TAG>;
+ interconnect-names = "qup-core",
+ "qup-config";
+
+ dmas = <&gpi_dma0 0 0 QCOM_GPI_SPI>,
+ <&gpi_dma0 1 0 QCOM_GPI_SPI>;
+ dma-names = "tx", "rx";
+
+ pinctrl-0 = <&qup_spi0_data_clk>, <&qup_spi0_cs>;
+ pinctrl-names = "default";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ status = "disabled";
+ };
+
uart0: serial@4a80000 {
compatible = "qcom,geni-debug-uart";
reg = <0x0 0x04a80000 0x0 0x4000>;
@@ -638,6 +986,609 @@ &clk_virt SLAVE_QUP_CORE_0 RPM_ALWAYS_TAG>,

status = "disabled";
};
+
+ i2c1: i2c@4a84000 {
+ compatible = "qcom,geni-i2c";
+ reg = <0x0 0x4a84000 0x0 0x4000>;
+
+ interrupts = <GIC_SPI 528 IRQ_TYPE_LEVEL_HIGH 0>;
+
+ clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>;
+ clock-names = "se";
+
+ interconnects = <&clk_virt MASTER_QUP_CORE_0 RPM_ALWAYS_TAG
+ &clk_virt SLAVE_QUP_CORE_0 RPM_ALWAYS_TAG>,
+ <&mem_noc MASTER_AMPSS_M0 RPM_ALWAYS_TAG
+ &config_noc SLAVE_QUP_0 RPM_ALWAYS_TAG>,
+ <&system_noc MASTER_QUP_0 RPM_ALWAYS_TAG
+ &mc_virt SLAVE_EBI_CH0 RPM_ALWAYS_TAG>;
+ interconnect-names = "qup-core",
+ "qup-config",
+ "qup-memory";
+
+ dmas = <&gpi_dma0 0 1 QCOM_GPI_I2C>,
+ <&gpi_dma0 1 1 QCOM_GPI_I2C>;
+ dma-names = "tx", "rx";
+
+ pinctrl-0 = <&qup_i2c1_data_clk>;
+ pinctrl-names = "default";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ status = "disabled";
+ };
+
+ uart1: serial@4a84000 {
+ compatible = "qcom,geni-uart";
+ reg = <0x0 0x04a84000 0x0 0x4000>;
+
+ interrupts = <GIC_SPI 528 IRQ_TYPE_LEVEL_HIGH 0>;
+
+ clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>;
+ clock-names = "se";
+
+ interconnects = <&clk_virt MASTER_QUP_CORE_0 RPM_ALWAYS_TAG
+ &clk_virt SLAVE_QUP_CORE_0 RPM_ALWAYS_TAG>,
+ <&mem_noc MASTER_AMPSS_M0 RPM_ALWAYS_TAG
+ &config_noc SLAVE_QUP_0 RPM_ALWAYS_TAG>;
+ interconnect-names = "qup-core",
+ "qup-config";
+
+ pinctrl-0 = <&qup_uart1_default>;
+ pinctrl-names = "default";
+
+ status = "disabled";
+ };
+
+ i2c2: i2c@4a88000 {
+ compatible = "qcom,geni-i2c";
+ reg = <0x0 0x4a88000 0x0 0x4000>;
+
+ interrupts = <GIC_SPI 529 IRQ_TYPE_LEVEL_HIGH 0>;
+
+ clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>;
+ clock-names = "se";
+
+ interconnects = <&clk_virt MASTER_QUP_CORE_0 RPM_ALWAYS_TAG
+ &clk_virt SLAVE_QUP_CORE_0 RPM_ALWAYS_TAG>,
+ <&mem_noc MASTER_AMPSS_M0 RPM_ALWAYS_TAG
+ &config_noc SLAVE_QUP_0 RPM_ALWAYS_TAG>,
+ <&system_noc MASTER_QUP_0 RPM_ALWAYS_TAG
+ &mc_virt SLAVE_EBI_CH0 RPM_ALWAYS_TAG>;
+ interconnect-names = "qup-core",
+ "qup-config",
+ "qup-memory";
+
+ pinctrl-0 = <&qup_i2c2_data_clk>;
+ pinctrl-names = "default";
+
+ dmas = <&gpi_dma0 0 2 QCOM_GPI_I2C>,
+ <&gpi_dma0 1 2 QCOM_GPI_I2C>;
+ dma-names = "tx", "rx";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ status = "disabled";
+ };
+
+ spi2: spi@4a88000 {
+ compatible = "qcom,geni-spi";
+ reg = <0x0 0x4a88000 0x0 0x4000>;
+
+ interrupts = <GIC_SPI 529 IRQ_TYPE_LEVEL_HIGH 0>;
+
+ clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>;
+ clock-names = "se";
+
+ interconnects = <&clk_virt MASTER_QUP_CORE_0 RPM_ALWAYS_TAG
+ &clk_virt SLAVE_QUP_CORE_0 RPM_ALWAYS_TAG>,
+ <&mem_noc MASTER_AMPSS_M0 RPM_ALWAYS_TAG
+ &config_noc SLAVE_QUP_0 RPM_ALWAYS_TAG>;
+ interconnect-names = "qup-core",
+ "qup-config";
+
+ dmas = <&gpi_dma0 0 2 QCOM_GPI_SPI>,
+ <&gpi_dma0 1 2 QCOM_GPI_SPI>;
+ dma-names = "tx", "rx";
+
+ pinctrl-0 = <&qup_spi2_data_clk>, <&qup_spi2_cs>;
+ pinctrl-names = "default";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ status = "disabled";
+ };
+
+ uart2: serial@4a88000 {
+ compatible = "qcom,geni-uart";
+ reg = <0x0 0x04a88000 0x0 0x4000>;
+
+ interrupts-extended = <&intc GIC_SPI 529 IRQ_TYPE_LEVEL_HIGH 0>,
+ <&tlmm 9 IRQ_TYPE_LEVEL_HIGH>;
+
+ clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>;
+ clock-names = "se";
+
+ interconnects = <&clk_virt MASTER_QUP_CORE_0 RPM_ALWAYS_TAG
+ &clk_virt SLAVE_QUP_CORE_0 RPM_ALWAYS_TAG>,
+ <&mem_noc MASTER_AMPSS_M0 RPM_ALWAYS_TAG
+ &config_noc SLAVE_QUP_0 RPM_ALWAYS_TAG>;
+ interconnect-names = "qup-core",
+ "qup-config";
+
+ pinctrl-0 = <&qup_uart2_default>, <&qup_uart2_cts_rts>;
+ pinctrl-names = "default";
+
+ status = "disabled";
+ };
+
+ i2c3: i2c@4a8c000 {
+ compatible = "qcom,geni-i2c";
+ reg = <0x0 0x4a8c000 0x0 0x4000>;
+
+ interrupts = <GIC_SPI 530 IRQ_TYPE_LEVEL_HIGH 0>;
+
+ clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>;
+ clock-names = "se";
+
+ interconnects = <&clk_virt MASTER_QUP_CORE_0 RPM_ALWAYS_TAG
+ &clk_virt SLAVE_QUP_CORE_0 RPM_ALWAYS_TAG>,
+ <&mem_noc MASTER_AMPSS_M0 RPM_ALWAYS_TAG
+ &config_noc SLAVE_QUP_0 RPM_ALWAYS_TAG>,
+ <&system_noc MASTER_QUP_0 RPM_ALWAYS_TAG
+ &mc_virt SLAVE_EBI_CH0 RPM_ALWAYS_TAG>;
+ interconnect-names = "qup-core",
+ "qup-config",
+ "qup-memory";
+
+ dmas = <&gpi_dma0 0 3 QCOM_GPI_I2C>,
+ <&gpi_dma0 1 3 QCOM_GPI_I2C>;
+ dma-names = "tx", "rx";
+
+ pinctrl-0 = <&qup_i2c3_data_clk>;
+ pinctrl-names = "default";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ status = "disabled";
+ };
+
+ uart3: serial@4a8c000 {
+ compatible = "qcom,geni-uart";
+ reg = <0x0 0x04a8c000 0x0 0x4000>;
+
+ interrupts = <GIC_SPI 530 IRQ_TYPE_LEVEL_HIGH 0>;
+
+ clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>;
+ clock-names = "se";
+
+ interconnects = <&clk_virt MASTER_QUP_CORE_0 RPM_ALWAYS_TAG
+ &clk_virt SLAVE_QUP_CORE_0 RPM_ALWAYS_TAG>,
+ <&mem_noc MASTER_AMPSS_M0 RPM_ALWAYS_TAG
+ &config_noc SLAVE_QUP_0 RPM_ALWAYS_TAG>;
+ interconnect-names = "qup-core",
+ "qup-config";
+
+ pinctrl-0 = <&qup_uart3_default>;
+ pinctrl-names = "default";
+
+ status = "disabled";
+ };
+
+ i2c4: i2c@4a90000 {
+ compatible = "qcom,geni-i2c";
+ reg = <0x0 0x4a90000 0x0 0x4000>;
+
+ interrupts = <GIC_SPI 531 IRQ_TYPE_LEVEL_HIGH 0>;
+
+ clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>;
+ clock-names = "se";
+
+ interconnects = <&clk_virt MASTER_QUP_CORE_0 RPM_ALWAYS_TAG
+ &clk_virt SLAVE_QUP_CORE_0 RPM_ALWAYS_TAG>,
+ <&mem_noc MASTER_AMPSS_M0 RPM_ALWAYS_TAG
+ &config_noc SLAVE_QUP_0 RPM_ALWAYS_TAG>,
+ <&system_noc MASTER_QUP_0 RPM_ALWAYS_TAG
+ &mc_virt SLAVE_EBI_CH0 RPM_ALWAYS_TAG>;
+ interconnect-names = "qup-core",
+ "qup-config",
+ "qup-memory";
+
+ dmas = <&gpi_dma0 0 4 QCOM_GPI_I2C>,
+ <&gpi_dma0 1 4 QCOM_GPI_I2C>;
+ dma-names = "tx", "rx";
+
+ pinctrl-0 = <&qup_i2c4_data_clk>;
+ pinctrl-names = "default";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ status = "disabled";
+ };
+
+ uart4: serial@4a90000 {
+ compatible = "qcom,geni-uart";
+ reg = <0x0 0x04a90000 0x0 0x4000>;
+
+ interrupts = <GIC_SPI 531 IRQ_TYPE_LEVEL_HIGH 0>;
+
+ clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>;
+ clock-names = "se";
+
+ interconnects = <&clk_virt MASTER_QUP_CORE_0 RPM_ALWAYS_TAG
+ &clk_virt SLAVE_QUP_CORE_0 RPM_ALWAYS_TAG>,
+ <&mem_noc MASTER_AMPSS_M0 RPM_ALWAYS_TAG
+ &config_noc SLAVE_QUP_0 RPM_ALWAYS_TAG>;
+ interconnect-names = "qup-core",
+ "qup-config";
+
+ pinctrl-0 = <&qup_uart4_default>;
+ pinctrl-names = "default";
+
+ status = "disabled";
+ };
+
+ i2c5: i2c@4a94000 {
+ compatible = "qcom,geni-i2c";
+ reg = <0x0 0x4a94000 0x0 0x4000>;
+
+ interrupts = <GIC_SPI 532 IRQ_TYPE_LEVEL_HIGH 0>;
+
+ clocks = <&gcc GCC_QUPV3_WRAP0_S5_CLK>;
+ clock-names = "se";
+
+ interconnects = <&clk_virt MASTER_QUP_CORE_0 RPM_ALWAYS_TAG
+ &clk_virt SLAVE_QUP_CORE_0 RPM_ALWAYS_TAG>,
+ <&mem_noc MASTER_AMPSS_M0 RPM_ALWAYS_TAG
+ &config_noc SLAVE_QUP_0 RPM_ALWAYS_TAG>,
+ <&system_noc MASTER_QUP_0 RPM_ALWAYS_TAG
+ &mc_virt SLAVE_EBI_CH0 RPM_ALWAYS_TAG>;
+ interconnect-names = "qup-core",
+ "qup-config",
+ "qup-memory";
+
+ dmas = <&gpi_dma0 0 5 QCOM_GPI_I2C>,
+ <&gpi_dma0 1 5 QCOM_GPI_I2C>;
+ dma-names = "tx", "rx";
+
+ pinctrl-0 = <&qup_i2c5_data_clk>;
+ pinctrl-names = "default";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ status = "disabled";
+ };
+
+ spi5: spi@4a94000 {
+ compatible = "qcom,geni-spi";
+ reg = <0x0 0x4a94000 0x0 0x4000>;
+
+ interrupts = <GIC_SPI 532 IRQ_TYPE_LEVEL_HIGH 0>;
+
+ clocks = <&gcc GCC_QUPV3_WRAP0_S5_CLK>;
+ clock-names = "se";
+
+ interconnects = <&clk_virt MASTER_QUP_CORE_0 RPM_ALWAYS_TAG
+ &clk_virt SLAVE_QUP_CORE_0 RPM_ALWAYS_TAG>,
+ <&mem_noc MASTER_AMPSS_M0 RPM_ALWAYS_TAG
+ &config_noc SLAVE_QUP_0 RPM_ALWAYS_TAG>;
+ interconnect-names = "qup-core",
+ "qup-config";
+
+ dmas = <&gpi_dma0 0 5 QCOM_GPI_SPI>,
+ <&gpi_dma0 1 5 QCOM_GPI_SPI>;
+ dma-names = "tx", "rx";
+
+ pinctrl-0 = <&qup_spi5_data_clk>, <&qup_spi5_cs>;
+ pinctrl-names = "default";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ status = "disabled";
+ };
+
+ uart5: serial@4a94000 {
+ compatible = "qcom,geni-uart";
+ reg = <0x0 0x04a94000 0x0 0x4000>;
+
+ interrupts = <GIC_SPI 532 IRQ_TYPE_LEVEL_HIGH 0>;
+
+ clocks = <&gcc GCC_QUPV3_WRAP0_S5_CLK>;
+ clock-names = "se";
+
+ interconnects = <&clk_virt MASTER_QUP_CORE_0 RPM_ALWAYS_TAG
+ &clk_virt SLAVE_QUP_CORE_0 RPM_ALWAYS_TAG>,
+ <&mem_noc MASTER_AMPSS_M0 RPM_ALWAYS_TAG
+ &config_noc SLAVE_QUP_0 RPM_ALWAYS_TAG>;
+ interconnect-names = "qup-core",
+ "qup-config";
+
+ pinctrl-0 = <&qup_uart5_default>, <&qup_uart5_cts_rts>;
+ pinctrl-names = "default";
+
+ status = "disabled";
+ };
+
+ i2c6: i2c@4a98000 {
+ compatible = "qcom,geni-i2c";
+ reg = <0x0 0x4a98000 0x0 0x4000>;
+
+ interrupts = <GIC_SPI 533 IRQ_TYPE_LEVEL_HIGH 0>;
+
+ clocks = <&gcc GCC_QUPV3_WRAP0_S6_CLK>;
+ clock-names = "se";
+
+ interconnects = <&clk_virt MASTER_QUP_CORE_0 RPM_ALWAYS_TAG
+ &clk_virt SLAVE_QUP_CORE_0 RPM_ALWAYS_TAG>,
+ <&mem_noc MASTER_AMPSS_M0 RPM_ALWAYS_TAG
+ &config_noc SLAVE_QUP_0 RPM_ALWAYS_TAG>,
+ <&system_noc MASTER_QUP_0 RPM_ALWAYS_TAG
+ &mc_virt SLAVE_EBI_CH0 RPM_ALWAYS_TAG>;
+ interconnect-names = "qup-core",
+ "qup-config",
+ "qup-memory";
+
+ dmas = <&gpi_dma0 0 6 QCOM_GPI_I2C>,
+ <&gpi_dma0 1 6 QCOM_GPI_I2C>;
+ dma-names = "tx", "rx";
+
+ pinctrl-0 = <&qup_i2c6_data_clk>;
+ pinctrl-names = "default";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ status = "disabled";
+ };
+
+ spi6: spi@4a98000 {
+ compatible = "qcom,geni-spi";
+ reg = <0x0 0x4a98000 0x0 0x4000>;
+
+ interrupts = <GIC_SPI 533 IRQ_TYPE_LEVEL_HIGH 0>;
+
+ clocks = <&gcc GCC_QUPV3_WRAP0_S6_CLK>;
+ clock-names = "se";
+
+ interconnects = <&clk_virt MASTER_QUP_CORE_0 RPM_ALWAYS_TAG
+ &clk_virt SLAVE_QUP_CORE_0 RPM_ALWAYS_TAG>,
+ <&mem_noc MASTER_AMPSS_M0 RPM_ALWAYS_TAG
+ &config_noc SLAVE_QUP_0 RPM_ALWAYS_TAG>;
+ interconnect-names = "qup-core",
+ "qup-config";
+
+ dmas = <&gpi_dma0 0 6 QCOM_GPI_SPI>,
+ <&gpi_dma0 1 6 QCOM_GPI_SPI>;
+ dma-names = "tx", "rx";
+
+ pinctrl-0 = <&qup_spi6_data_clk>, <&qup_spi6_cs>;
+ pinctrl-names = "default";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ status = "disabled";
+ };
+
+ uart6: serial@4a98000 {
+ compatible = "qcom,geni-uart";
+ reg = <0x0 0x04a98000 0x0 0x4000>;
+
+ interrupts = <GIC_SPI 533 IRQ_TYPE_LEVEL_HIGH 0>;
+
+ clocks = <&gcc GCC_QUPV3_WRAP0_S6_CLK>;
+ clock-names = "se";
+
+ interconnects = <&clk_virt MASTER_QUP_CORE_0 RPM_ALWAYS_TAG
+ &clk_virt SLAVE_QUP_CORE_0 RPM_ALWAYS_TAG>,
+ <&mem_noc MASTER_AMPSS_M0 RPM_ALWAYS_TAG
+ &config_noc SLAVE_QUP_0 RPM_ALWAYS_TAG>;
+ interconnect-names = "qup-core",
+ "qup-config";
+
+ pinctrl-0 = <&qup_uart6_default>, <&qup_uart6_cts_rts>;
+ pinctrl-names = "default";
+
+ status = "disabled";
+ };
+
+ i2c7: i2c@4a9c000 {
+ compatible = "qcom,geni-i2c";
+ reg = <0x0 0x4a9c000 0x0 0x4000>;
+
+ interrupts = <GIC_SPI 534 IRQ_TYPE_LEVEL_HIGH 0>;
+
+ clocks = <&gcc GCC_QUPV3_WRAP0_S7_CLK>;
+ clock-names = "se";
+
+ interconnects = <&clk_virt MASTER_QUP_CORE_0 RPM_ALWAYS_TAG
+ &clk_virt SLAVE_QUP_CORE_0 RPM_ALWAYS_TAG>,
+ <&mem_noc MASTER_AMPSS_M0 RPM_ALWAYS_TAG
+ &config_noc SLAVE_QUP_0 RPM_ALWAYS_TAG>,
+ <&system_noc MASTER_QUP_0 RPM_ALWAYS_TAG
+ &mc_virt SLAVE_EBI_CH0 RPM_ALWAYS_TAG>;
+ interconnect-names = "qup-core",
+ "qup-config",
+ "qup-memory";
+
+ dmas = <&gpi_dma0 0 7 QCOM_GPI_I2C>,
+ <&gpi_dma0 1 7 QCOM_GPI_I2C>;
+ dma-names = "tx", "rx";
+
+ pinctrl-0 = <&qup_i2c7_data_clk>;
+ pinctrl-names = "default";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ status = "disabled";
+ };
+
+ uart7: serial@4a9c000 {
+ compatible = "qcom,geni-uart";
+ reg = <0x0 0x04a9c000 0x0 0x4000>;
+
+ interrupts = <GIC_SPI 534 IRQ_TYPE_LEVEL_HIGH 0>;
+
+ clocks = <&gcc GCC_QUPV3_WRAP0_S7_CLK>;
+ clock-names = "se";
+
+ interconnects = <&clk_virt MASTER_QUP_CORE_0 RPM_ALWAYS_TAG
+ &clk_virt SLAVE_QUP_CORE_0 RPM_ALWAYS_TAG>,
+ <&mem_noc MASTER_AMPSS_M0 RPM_ALWAYS_TAG
+ &config_noc SLAVE_QUP_0 RPM_ALWAYS_TAG>;
+ interconnect-names = "qup-core",
+ "qup-config";
+
+ pinctrl-0 = <&qup_uart7_default>;
+ pinctrl-names = "default";
+
+ status = "disabled";
+ };
+
+ i2c8: i2c@4aa0000 {
+ compatible = "qcom,geni-i2c";
+ reg = <0x0 0x4aa0000 0x0 0x4000>;
+
+ interrupts = <GIC_SPI 535 IRQ_TYPE_LEVEL_HIGH 0>;
+
+ clocks = <&gcc GCC_QUPV3_WRAP0_S8_CLK>;
+ clock-names = "se";
+
+ interconnects = <&clk_virt MASTER_QUP_CORE_0 RPM_ALWAYS_TAG
+ &clk_virt SLAVE_QUP_CORE_0 RPM_ALWAYS_TAG>,
+ <&mem_noc MASTER_AMPSS_M0 RPM_ALWAYS_TAG
+ &config_noc SLAVE_QUP_0 RPM_ALWAYS_TAG>,
+ <&system_noc MASTER_QUP_0 RPM_ALWAYS_TAG
+ &mc_virt SLAVE_EBI_CH0 RPM_ALWAYS_TAG>;
+ interconnect-names = "qup-core",
+ "qup-config",
+ "qup-memory";
+
+ dmas = <&gpi_dma0 0 8 QCOM_GPI_I2C>,
+ <&gpi_dma0 1 8 QCOM_GPI_I2C>;
+ dma-names = "tx", "rx";
+
+ pinctrl-0 = <&qup_i2c8_data_clk>;
+ pinctrl-names = "default";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ status = "disabled";
+ };
+
+ spi8: spi@4aa0000 {
+ compatible = "qcom,geni-spi";
+ reg = <0x0 0x4aa0000 0x0 0x4000>;
+
+ interrupts = <GIC_SPI 535 IRQ_TYPE_LEVEL_HIGH 0>;
+
+ clocks = <&gcc GCC_QUPV3_WRAP0_S8_CLK>;
+ clock-names = "se";
+
+ interconnects = <&clk_virt MASTER_QUP_CORE_0 RPM_ALWAYS_TAG
+ &clk_virt SLAVE_QUP_CORE_0 RPM_ALWAYS_TAG>,
+ <&mem_noc MASTER_AMPSS_M0 RPM_ALWAYS_TAG
+ &config_noc SLAVE_QUP_0 RPM_ALWAYS_TAG>;
+ interconnect-names = "qup-core",
+ "qup-config";
+
+ dmas = <&gpi_dma0 0 8 QCOM_GPI_SPI>,
+ <&gpi_dma0 1 8 QCOM_GPI_SPI>;
+ dma-names = "tx", "rx";
+
+ pinctrl-0 = <&qup_spi8_data_clk>, <&qup_spi8_cs>;
+ pinctrl-names = "default";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ status = "disabled";
+ };
+
+ uart8: serial@4aa0000 {
+ compatible = "qcom,geni-uart";
+ reg = <0x0 0x04aa0000 0x0 0x4000>;
+
+ interrupts = <GIC_SPI 535 IRQ_TYPE_LEVEL_HIGH 0>;
+
+ clocks = <&gcc GCC_QUPV3_WRAP0_S8_CLK>;
+ clock-names = "se";
+
+ interconnects = <&clk_virt MASTER_QUP_CORE_0 RPM_ALWAYS_TAG
+ &clk_virt SLAVE_QUP_CORE_0 RPM_ALWAYS_TAG>,
+ <&mem_noc MASTER_AMPSS_M0 RPM_ALWAYS_TAG
+ &config_noc SLAVE_QUP_0 RPM_ALWAYS_TAG>;
+ interconnect-names = "qup-core",
+ "qup-config";
+
+ pinctrl-0 = <&qup_uart8_default>, <&qup_uart8_cts_rts>;
+ pinctrl-names = "default";
+
+ status = "disabled";
+ };
+
+ i2c9: i2c@4aa4000 {
+ compatible = "qcom,geni-i2c";
+ reg = <0x0 0x4aa4000 0x0 0x4000>;
+
+ interrupts = <GIC_SPI 536 IRQ_TYPE_LEVEL_HIGH 0>;
+
+ clocks = <&gcc GCC_QUPV3_WRAP0_S9_CLK>;
+ clock-names = "se";
+
+ interconnects = <&clk_virt MASTER_QUP_CORE_0 RPM_ALWAYS_TAG
+ &clk_virt SLAVE_QUP_CORE_0 RPM_ALWAYS_TAG>,
+ <&mem_noc MASTER_AMPSS_M0 RPM_ALWAYS_TAG
+ &config_noc SLAVE_QUP_0 RPM_ALWAYS_TAG>,
+ <&system_noc MASTER_QUP_0 RPM_ALWAYS_TAG
+ &mc_virt SLAVE_EBI_CH0 RPM_ALWAYS_TAG>;
+ interconnect-names = "qup-core",
+ "qup-config",
+ "qup-memory";
+
+ dmas = <&gpi_dma0 0 9 QCOM_GPI_I2C>,
+ <&gpi_dma0 1 9 QCOM_GPI_I2C>;
+ dma-names = "tx", "rx";
+
+ pinctrl-0 = <&qup_i2c9_data_clk>;
+ pinctrl-names = "default";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ status = "disabled";
+ };
+
+ uart9: serial@4aa4000 {
+ compatible = "qcom,geni-uart";
+ reg = <0x0 0x04aa4000 0x0 0x4000>;
+
+ interrupts = <GIC_SPI 536 IRQ_TYPE_LEVEL_HIGH 0>;
+
+ clocks = <&gcc GCC_QUPV3_WRAP0_S9_CLK>;
+ clock-names = "se";
+
+ interconnects = <&clk_virt MASTER_QUP_CORE_0 RPM_ALWAYS_TAG
+ &clk_virt SLAVE_QUP_CORE_0 RPM_ALWAYS_TAG>,
+ <&mem_noc MASTER_AMPSS_M0 RPM_ALWAYS_TAG
+ &config_noc SLAVE_QUP_0 RPM_ALWAYS_TAG>;
+ interconnect-names = "qup-core",
+ "qup-config";
+
+ pinctrl-0 = <&qup_uart9_default>;
+ pinctrl-names = "default";
+
+ status = "disabled";
+ };
};

sram@c11e000 {

--
2.34.1