[PATCH 6/8] arm64: dts: qcom: shikra: Add pin configuration for mclks

[Nihal Kumar Gupta]

Add pinctrl configuration for the four available camera master clocks.

Signed-off-by: Nihal Kumar Gupta <nihal.gupta@xxxxxxxxxxxxxxxx>
---
 arch/arm64/boot/dts/qcom/shikra.dtsi | 28 ++++++++++++++++++++++++++++
 1 file changed, 28 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/shikra.dtsi b/arch/arm64/boot/dts/qcom/shikra.dtsi
index 46de35971f629ded990827ebd76134e652758ce3..3fdb0c45d17880f1c1c6b90ee6e91b154e313738 100644
--- a/arch/arm64/boot/dts/qcom/shikra.dtsi
+++ b/arch/arm64/boot/dts/qcom/shikra.dtsi
@@ -380,6 +380,34 @@ cci_i2c1_sleep: cci-i2c1-sleep-state {
 				bias-pull-down;
 			};
 
+			mclk0_default: mclk0-default-state {
+				pins = "gpio34";
+				function = "cam_mclk";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			mclk1_default: mclk1-default-state {
+				pins = "gpio35";
+				function = "cam_mclk";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			mclk2_default: mclk2-default-state {
+				pins = "gpio96";
+				function = "cam_mclk";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			mclk3_default: mclk3-default-state {
+				pins = "gpio98";
+				function = "cam_mclk";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
 			qup_uart0_default: qup-uart0-default-state {
 				pins = "gpio0", "gpio1";
 				function = "qup0_se0";

-- 
2.34.1