Re: [PATCH v2] Bluetooth: hci_qca: Use 100 ms SSR delay for rampatch and NVM loading

[patchwork-bot+bluetooth]

Hello:

This patch was applied to bluetooth/bluetooth-next.git (master)
by Luiz Augusto von Dentz <luiz.von.dentz@xxxxxxxxx>:

On Mon, 25 May 2026 14:51:56 +0800 you wrote:
> When bt_en is pulled high by hardware, the host does not re-download
> the firmware after SSR. The controller loads the rampatch and NVM
> internally.
> 
> On HMT chip, the rampatch is ~264 KB and the NVM is ~9.4 KB. The
> loading process takes approximately 70 ms. The previous 50 ms delay is
> too short, causing the controller to not respond to the reset command
> sent by the host, which leads to BT initialization failure:
> 
> [...]

Here is the summary with links:
  - [v2] Bluetooth: hci_qca: Use 100 ms SSR delay for rampatch and NVM loading
    https://git.kernel.org/bluetooth/bluetooth-next/c/b74b39bc6d9d

You are awesome, thank you!
-- 
Deet-doot-dot, I am a bot.
https://korg.docs.kernel.org/patchwork/pwbot.html