Re: [PATCH v7 4/6] leds: is31fl32xx: Add powerdown pin for hardware shutdown mode

From: Lee Jones

Date: Wed May 27 2026 - 11:22:25 EST


On Wed, 20 May 2026, Jun Yan wrote:

> The IS31FL32XX series features an SDB shutdown pin.
> Driving it low (active low) places the chip into hardware shutdown

Nit: No need to wrap for a new sentence.

> mode for power saving, while all register contents are preserved
> and registers are not reset.
>
> Deassert/assert the pin accordingly during probe() and remove()
> to manage hardware shutdown mode.
>
> Signed-off-by: Jun Yan <jerrysteve1101@xxxxxxxxx>
> ---
> drivers/leds/leds-is31fl32xx.c | 13 +++++++++++++
> 1 file changed, 13 insertions(+)
>
> diff --git a/drivers/leds/leds-is31fl32xx.c b/drivers/leds/leds-is31fl32xx.c
> index fe07acbb103a..5b9ed5a1818f 100644
> --- a/drivers/leds/leds-is31fl32xx.c
> +++ b/drivers/leds/leds-is31fl32xx.c
> @@ -10,6 +10,7 @@
> */
>
> #include <linux/device.h>
> +#include <linux/gpio/consumer.h>
> #include <linux/i2c.h>
> #include <linux/kernel.h>
> #include <linux/leds.h>
> @@ -60,6 +61,7 @@ struct is31fl32xx_led_data {
> struct is31fl32xx_priv {
> const struct is31fl32xx_chipdef *cdef;
> struct i2c_client *client;
> + struct gpio_desc *powerdown_gpio;
> unsigned int num_leds;
> struct is31fl32xx_led_data leds[];
> };
> @@ -421,6 +423,14 @@ static int is31fl32xx_parse_dt(struct device *dev,
> const struct is31fl32xx_chipdef *cdef = priv->cdef;
> int ret = 0;
>
> + /* Driving this GPIO line low takes the chip out of shutdown,
> + * as it is flagged as GPIO_ACTIVE_LOW in provider (such as the device tree).
> + */

Please use properly formatted multi-line comments.

> + priv->powerdown_gpio = devm_gpiod_get_optional(dev, "powerdown", GPIOD_OUT_LOW);
> + if (IS_ERR(priv->powerdown_gpio))
> + return dev_err_probe(dev, PTR_ERR(priv->powerdown_gpio),
> + "Failed to get powerdown gpio\n");

Nit: GPIO

> +
> if ((cdef->output_frequency_setting_reg != IS31FL32XX_REG_NONE) &&
> of_property_read_bool(dev_of_node(dev), "issi,22khz-pwm")) {
>
> @@ -609,6 +619,9 @@ static void is31fl32xx_remove(struct i2c_client *client)
> if (ret)
> dev_err(&client->dev, "Failed to reset registers on removal (%pe)\n",
> ERR_PTR(ret));
> +
> + if (priv->powerdown_gpio)
> + gpiod_set_value(priv->powerdown_gpio, 1);
> }
>
> /*
> --
> 2.54.0
>
>

--
Lee Jones