[PATCH v4 4/7] clk: qcom: tcsrcc-glymur: Add Mahua QREF regulator support

[Qiang Yu]

Mahua is based on Glymur but uses a different QREF topology, requiring
distinct regulator lists and clock descriptors for its PCIe clock
references.

Add mahua-specific regulator arrays and clk descriptor table, and use
match_data to select the correct descriptor table per compatible string at
probe time.

Signed-off-by: Qiang Yu <qiang.yu@xxxxxxxxxxxxxxxx>
---
 drivers/clk/qcom/tcsrcc-glymur.c | 99 ++++++++++++++++++++++++++++++++++++++--
 1 file changed, 96 insertions(+), 3 deletions(-)

diff --git a/drivers/clk/qcom/tcsrcc-glymur.c b/drivers/clk/qcom/tcsrcc-glymur.c
index e317003398d1..deca9b8794b4 100644
--- a/drivers/clk/qcom/tcsrcc-glymur.c
+++ b/drivers/clk/qcom/tcsrcc-glymur.c
@@ -13,6 +13,11 @@
 
 #include <dt-bindings/clock/qcom,glymur-tcsr.h>
 
+struct tcsrcc_glymur_data {
+	const struct qcom_clk_ref_desc *descs;
+	size_t num_descs;
+};
+
 static const char * const glymur_tcsr_tx0_rx5_regulators[] = {
 	"vdda-refgen3-0p9",
 	"vdda-refgen3-1p2",
@@ -40,6 +45,25 @@ static const char * const glymur_tcsr_tx1_rpt012_rx2_regulators[] = {
 	"vdda-qrefrx2-0p9",
 };
 
+static const char * const mahua_tcsr_tx1_rpt01_rx1_regulators[] = {
+	"vdda-refgen3-0p9",
+	"vdda-refgen3-1p2",
+	"vdda-qreftx1-0p9",
+	"vdda-qrefrpt0-0p9",
+	"vdda-qrefrpt1-0p9",
+	"vdda-qrefrx1-0p9",
+};
+
+static const char * const mahua_tcsr_tx1_rpt012_rx2_regulators[] = {
+	"vdda-refgen3-0p9",
+	"vdda-refgen3-1p2",
+	"vdda-qreftx1-0p9",
+	"vdda-qrefrpt0-0p9",
+	"vdda-qrefrpt1-0p9",
+	"vdda-qrefrpt2-0p9",
+	"vdda-qrefrx2-0p9",
+};
+
 static const struct regmap_config tcsr_cc_glymur_regmap_config = {
 	.reg_bits = 32,
 	.reg_stride = 4,
@@ -111,17 +135,86 @@ static const struct qcom_clk_ref_desc tcsr_cc_glymur_clk_descs[] = {
 	},
 };
 
+static const struct qcom_clk_ref_desc tcsr_cc_mahua_clk_descs[] = {
+	[TCSR_EDP_CLKREF_EN] = {
+		.name = "tcsr_edp_clkref_en",
+		.offset = 0x60,
+	},
+	[TCSR_PCIE_2_CLKREF_EN] = {
+		.name = "tcsr_pcie_2_clkref_en",
+		.offset = 0x4c,
+		.regulator_names = mahua_tcsr_tx1_rpt01_rx1_regulators,
+		.num_regulators = ARRAY_SIZE(mahua_tcsr_tx1_rpt01_rx1_regulators),
+	},
+	[TCSR_PCIE_3_CLKREF_EN] = {
+		.name = "tcsr_pcie_3_clkref_en",
+		.offset = 0x54,
+		.regulator_names = mahua_tcsr_tx1_rpt012_rx2_regulators,
+		.num_regulators = ARRAY_SIZE(mahua_tcsr_tx1_rpt012_rx2_regulators),
+	},
+	[TCSR_PCIE_4_CLKREF_EN] = {
+		.name = "tcsr_pcie_4_clkref_en",
+		.offset = 0x58,
+		.regulator_names = mahua_tcsr_tx1_rpt01_rx1_regulators,
+		.num_regulators = ARRAY_SIZE(mahua_tcsr_tx1_rpt01_rx1_regulators),
+	},
+	[TCSR_USB2_1_CLKREF_EN] = {
+		.name = "tcsr_usb2_1_clkref_en",
+		.offset = 0x6c,
+	},
+	[TCSR_USB2_2_CLKREF_EN] = {
+		.name = "tcsr_usb2_2_clkref_en",
+		.offset = 0x70,
+	},
+	[TCSR_USB2_3_CLKREF_EN] = {
+		.name = "tcsr_usb2_3_clkref_en",
+		.offset = 0x74,
+	},
+	[TCSR_USB2_4_CLKREF_EN] = {
+		.name = "tcsr_usb2_4_clkref_en",
+		.offset = 0x88,
+	},
+	[TCSR_USB3_0_CLKREF_EN] = {
+		.name = "tcsr_usb3_0_clkref_en",
+		.offset = 0x64,
+	},
+	[TCSR_USB3_1_CLKREF_EN] = {
+		.name = "tcsr_usb3_1_clkref_en",
+		.offset = 0x68,
+	},
+	[TCSR_USB4_1_CLKREF_EN] = {
+		.name = "tcsr_usb4_1_clkref_en",
+		.offset = 0x44,
+	},
+	[TCSR_USB4_2_CLKREF_EN] = {
+		.name = "tcsr_usb4_2_clkref_en",
+		.offset = 0x5c,
+	},
+};
+
+static const struct tcsrcc_glymur_data tcsr_cc_glymur_data = {
+	.descs     = tcsr_cc_glymur_clk_descs,
+	.num_descs = ARRAY_SIZE(tcsr_cc_glymur_clk_descs),
+};
+
+static const struct tcsrcc_glymur_data tcsr_cc_mahua_data = {
+	.descs     = tcsr_cc_mahua_clk_descs,
+	.num_descs = ARRAY_SIZE(tcsr_cc_mahua_clk_descs),
+};
+
 static const struct of_device_id tcsr_cc_glymur_match_table[] = {
-	{ .compatible = "qcom,glymur-tcsr" },
+	{ .compatible = "qcom,glymur-tcsr", .data = &tcsr_cc_glymur_data },
+	{ .compatible = "qcom,mahua-tcsr",  .data = &tcsr_cc_mahua_data  },
 	{ }
 };
 MODULE_DEVICE_TABLE(of, tcsr_cc_glymur_match_table);
 
 static int tcsr_cc_glymur_probe(struct platform_device *pdev)
 {
+	const struct tcsrcc_glymur_data *data = device_get_match_data(&pdev->dev);
+
 	return qcom_clk_ref_probe(pdev, &tcsr_cc_glymur_regmap_config,
-				  tcsr_cc_glymur_clk_descs,
-				  ARRAY_SIZE(tcsr_cc_glymur_clk_descs));
+				  data->descs, data->num_descs);
 }
 
 static struct platform_driver tcsr_cc_glymur_driver = {

-- 
2.34.1