[PATCH 1/3] arm64: dts: renesas: rzt2h-n2h-evk: Remove unused MII/GMII pins

[Prabhakar]

From: Lad Prabhakar <prabhakar.mahadev-lad.rj@xxxxxxxxxxxxxx>

Remove the unused TXER, RXER, CRS, and COL pinmux configurations from the
gmac1 (ETH3) and gmac2 (ETH2) pin groups.

The Ethernet interfaces on both the RZ/T2H and RZ/N2H EVK boards operate
in RGMII mode, which does not utilize these extra MII/GMII sideband signal
pins. Update the board switch configuration comments to accurately reflect
the pin ranges that are actually in use.

Fixes: b272b94fd2239 ("arm64: dts: renesas: rzt2h-n2h-evk: Enable Ethernet support")
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@xxxxxxxxxxxxxx>
---
 .../boot/dts/renesas/r9a09g077m44-rzt2h-evk.dts   | 14 ++------------
 .../boot/dts/renesas/r9a09g087m44-rzn2h-evk.dts   | 15 ++-------------
 2 files changed, 4 insertions(+), 25 deletions(-)

diff --git a/arch/arm64/boot/dts/renesas/r9a09g077m44-rzt2h-evk.dts b/arch/arm64/boot/dts/renesas/r9a09g077m44-rzt2h-evk.dts
index e9ed2de128f6..987e44d0bf95 100644
--- a/arch/arm64/boot/dts/renesas/r9a09g077m44-rzt2h-evk.dts
+++ b/arch/arm64/boot/dts/renesas/r9a09g077m44-rzt2h-evk.dts
@@ -256,8 +256,7 @@ can0_pins: can0-pins {
 	/*
 	 * GMAC1 Pin Configuration:
 	 *
-	 * SW2[8] ON - use pins P33_2-P33_7, P34_0-P34_5, P34_7 and
-	 * P35_0-P35_2 for Ethernet port 3
+	 * SW2[8] ON - use pins P33_2-P33_7 and P34_0-P34_5 for Ethernet port 3
 	 */
 	gmac1_pins: gmac1-pins {
 		pinmux = <RZT2H_PORT_PINMUX(33, 2, 0xf)>, /* ETH3_TXCLK */
@@ -272,10 +271,6 @@ gmac1_pins: gmac1-pins {
 			 <RZT2H_PORT_PINMUX(34, 3, 0xf)>, /* ETH3_RXD2 */
 			 <RZT2H_PORT_PINMUX(34, 4, 0xf)>, /* ETH3_RXD3 */
 			 <RZT2H_PORT_PINMUX(34, 5, 0xf)>, /* ETH3_RXDV */
-			 <RZT2H_PORT_PINMUX(34, 7, 0xf)>, /* ETH3_TXER */
-			 <RZT2H_PORT_PINMUX(35, 0, 0xf)>, /* ETH3_RXER */
-			 <RZT2H_PORT_PINMUX(35, 1, 0xf)>, /* ETH3_CRS */
-			 <RZT2H_PORT_PINMUX(35, 2, 0xf)>, /* ETH3_COL */
 			 <RZT2H_PORT_PINMUX(26, 1, 0x10)>, /* GMAC1_MDC */
 			 <RZT2H_PORT_PINMUX(26, 2, 0x10)>, /* GMAC1_MDIO */
 			 <RZT2H_PORT_PINMUX(34, 6, 0x2)>, /* ETH3_REFCLK */
@@ -286,8 +281,7 @@ gmac1_pins: gmac1-pins {
 	 * GMAC2 Pin Configuration:
 	 *
 	 * SW2[6] OFF - connect MDC/MDIO of Ethernet port 2 to GMAC2
-	 * SW2[7] ON - use pins P29_1-P29_7, P30_0-P30_4, and P31_2-P31_5
-	 * for Ethernet port 2
+	 * SW2[7] ON - use pins P29_1-P29_7 and P30_0-P30_4 for Ethernet port 2
 	 */
 	gmac2_pins: gmac2-pins {
 		pinmux = <RZT2H_PORT_PINMUX(29, 1, 0xf)>, /* ETH2_TXCLK */
@@ -302,10 +296,6 @@ gmac2_pins: gmac2-pins {
 			 <RZT2H_PORT_PINMUX(30, 2, 0xf)>, /* ETH2_RXD2 */
 			 <RZT2H_PORT_PINMUX(30, 3, 0xf)>, /* ETH2_RXD3 */
 			 <RZT2H_PORT_PINMUX(30, 4, 0xf)>, /* ETH2_RXDV */
-			 <RZT2H_PORT_PINMUX(31, 2, 0xf)>, /* ETH2_TXER */
-			 <RZT2H_PORT_PINMUX(31, 3, 0xf)>, /* ETH2_RXER */
-			 <RZT2H_PORT_PINMUX(31, 4, 0xf)>, /* ETH2_CRS */
-			 <RZT2H_PORT_PINMUX(31, 5, 0xf)>, /* ETH2_COL */
 			 <RZT2H_PORT_PINMUX(30, 5, 0x10)>, /* GMAC2_MDC */
 			 <RZT2H_PORT_PINMUX(30, 6, 0x10)>, /* GMAC2_MDIO */
 			 <RZT2H_PORT_PINMUX(31, 0, 0x2)>, /* ETH2_REFCLK */
diff --git a/arch/arm64/boot/dts/renesas/r9a09g087m44-rzn2h-evk.dts b/arch/arm64/boot/dts/renesas/r9a09g087m44-rzn2h-evk.dts
index ef6cc7497c2c..a66502d8d82b 100644
--- a/arch/arm64/boot/dts/renesas/r9a09g087m44-rzn2h-evk.dts
+++ b/arch/arm64/boot/dts/renesas/r9a09g087m44-rzn2h-evk.dts
@@ -339,9 +339,7 @@ can1_pins: can1-pins {
 	/*
 	 * GMAC1 Pin Configuration:
 	 *
-	 * DSW5[8] ON - use pins P00_0-P00_2, P33_2-P33_7, P34_0-P34_6
-	 * for Ethernet port 3
-	 * DSW12[1] OFF; DSW12[2] ON - use pin P00_3 for Ethernet port 3
+	 * DSW5[8] ON - use pins P33_2-P33_7 and P34_0-P34_6 for Ethernet port 3
 	 */
 	gmac1_pins: gmac1-pins {
 		pinmux = <RZT2H_PORT_PINMUX(33, 2, 0xf)>, /* ETH3_TXCLK */
@@ -356,10 +354,6 @@ gmac1_pins: gmac1-pins {
 			 <RZT2H_PORT_PINMUX(34, 3, 0xf)>, /* ETH3_RXD2 */
 			 <RZT2H_PORT_PINMUX(34, 4, 0xf)>, /* ETH3_RXD3 */
 			 <RZT2H_PORT_PINMUX(34, 5, 0xf)>, /* ETH3_RXDV */
-			 <RZT2H_PORT_PINMUX(0, 0, 0xf)>, /* ETH3_TXER */
-			 <RZT2H_PORT_PINMUX(0, 1, 0xf)>, /* ETH3_RXER */
-			 <RZT2H_PORT_PINMUX(0, 2, 0xf)>, /* ETH3_CRS */
-			 <RZT2H_PORT_PINMUX(0, 3, 0xf)>, /* ETH3_COL */
 			 <RZT2H_PORT_PINMUX(26, 1, 0x10)>, /* GMAC1_MDC */
 			 <RZT2H_PORT_PINMUX(26, 2, 0x10)>, /* GMAC1_MDIO */
 			 <RZT2H_PORT_PINMUX(34, 6, 0x2)>, /* ETH3_REFCLK */
@@ -370,8 +364,7 @@ gmac1_pins: gmac1-pins {
 	 * GMAC2 Pin Configuration:
 	 *
 	 * DSW5[6] OFF - connect MDC/MDIO of Ethernet port 2 to GMAC2
-	 * DSW5[7] ON - use pins P29_1-P29_7, P30_0-P30_4, P30_7,
-	 * P31_2, P31_4 and P31_5 are used for Ethernet port 2
+	 * DSW5[7] ON - use pins P29_1-P29_7 and P30_0-P30_4 for Ethernet port 2
 	 * DSW13[7] OFF; DSW13[8] ON - use pin P13_7 for IRQ14
 	 */
 	gmac2_pins: gmac2-pins {
@@ -387,10 +380,6 @@ gmac2_pins: gmac2-pins {
 			 <RZT2H_PORT_PINMUX(30, 2, 0xf)>, /* ETH2_RXD2 */
 			 <RZT2H_PORT_PINMUX(30, 3, 0xf)>, /* ETH2_RXD3 */
 			 <RZT2H_PORT_PINMUX(30, 4, 0xf)>, /* ETH2_RXDV */
-			 <RZT2H_PORT_PINMUX(31, 2, 0xf)>, /* ETH2_TXER */
-			 <RZT2H_PORT_PINMUX(31, 1, 0xf)>, /* ETH2_RXER */
-			 <RZT2H_PORT_PINMUX(31, 4, 0xf)>, /* ETH2_CRS */
-			 <RZT2H_PORT_PINMUX(31, 5, 0xf)>, /* ETH2_COL */
 			 <RZT2H_PORT_PINMUX(30, 5, 0x10)>, /* GMAC2_MDC */
 			 <RZT2H_PORT_PINMUX(30, 6, 0x10)>, /* GMAC2_MDIO */
 			 <RZT2H_PORT_PINMUX(31, 0, 0x2)>, /* ETH2_REFCLK */
-- 
2.54.0