[PATCH phy-next 01/13] dt-bindings: phy: lynx-10g: initial document

[Vladimir Oltean]

Add a schema for the 10G Lynx SerDes. This is very similar to the modern
form of the 28G Lynx SerDes, which is very much the intention.

We allow both forms of #phy-cells = <1> in the top-level provider
and #phy-cells = <0> in the per-lane provider for more flexibility to
consumers, and because the kernel code is shared with the 28G Lynx which
already has that support for compatibility reasons.

Signed-off-by: Vladimir Oltean <vladimir.oltean@xxxxxxx>
---
Cc: devicetree@xxxxxxxxxxxxxxx
Cc: Conor Dooley <conor+dt@xxxxxxxxxx>
Cc: Krzysztof Kozlowski <krzk+dt@xxxxxxxxxx>
Cc: Rob Herring <robh@xxxxxxxxxx>
---
 .../devicetree/bindings/phy/fsl,lynx-10g.yaml | 131 ++++++++++++++++++
 1 file changed, 131 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/phy/fsl,lynx-10g.yaml

diff --git a/Documentation/devicetree/bindings/phy/fsl,lynx-10g.yaml b/Documentation/devicetree/bindings/phy/fsl,lynx-10g.yaml
new file mode 100644
index 000000000000..993f076bba4e
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/fsl,lynx-10g.yaml
@@ -0,0 +1,131 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/phy/fsl,lynx-10g.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale Lynx 10G SerDes PHY
+
+maintainers:
+  - Vladimir Oltean <vladimir.oltean@xxxxxxx>
+
+description:
+  The 10G Lynx is a multi-protocol SerDes block which handles networking, PCIe,
+  SATA and other high-speed interfaces. It is present on most QorIQ and
+  Layerscape SoCs. The register map is common, but the integration is
+  SoC-specific, with the differences consisting in register endianness, the
+  number of lanes, protocol converters available per lane and their location in
+  the PCCR registers. Some SoCs have multiple SerDes blocks and those differ in
+  their protocol capabilities per lane.
+
+properties:
+  compatible:
+    description:
+      There is intentionally no generic fsl,lynx-10g compatible string due to
+      the hardware inability to report its capabilities, despite having a
+      common register map.
+    enum:
+      - fsl,ls1028a-serdes
+      - fsl,ls1046a-serdes1
+      - fsl,ls1046a-serdes2
+      - fsl,ls1088a-serdes1
+      - fsl,ls1088a-serdes2
+      - fsl,ls2088a-serdes1
+      - fsl,ls2088a-serdes2
+
+  reg:
+    maxItems: 1
+
+  big-endian: true
+
+  "#phy-cells":
+    const: 1
+
+  "#address-cells":
+    const: 1
+
+  "#size-cells":
+    const: 0
+
+patternProperties:
+  "^phy@[0-7]$":
+    type: object
+    description: SerDes lane (single RX/TX differential pair)
+
+    properties:
+      reg:
+        minimum: 0
+        maximum: 7
+        description: Lane index as seen in register map
+
+      "#phy-cells":
+        const: 0
+
+    required:
+      - reg
+      - "#phy-cells"
+
+    additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - "#phy-cells"
+  - "#address-cells"
+  - "#size-cells"
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - fsl,ls1028a-serdes
+              - fsl,ls1046a-serdes1
+              - fsl,ls1046a-serdes2
+              - fsl,ls1088a-serdes1
+              - fsl,ls1088a-serdes2
+    then:
+      patternProperties:
+        "^phy@[0-7]$":
+          properties:
+            reg:
+              minimum: 0
+              maximum: 3
+
+additionalProperties: false
+
+examples:
+  - |
+    soc {
+      #address-cells = <2>;
+      #size-cells = <2>;
+
+      serdes@1ea0000 {
+        compatible = "fsl,ls1028a-serdes";
+        reg = <0x0 0x1ea0000 0x0 0xffff>;
+        #address-cells = <1>;
+        #size-cells = <0>;
+        #phy-cells = <1>;
+
+        phy@0 {
+          reg = <0>;
+          #phy-cells = <0>;
+        };
+
+        phy@1 {
+          reg = <1>;
+          #phy-cells = <0>;
+        };
+
+        phy@2 {
+          reg = <2>;
+          #phy-cells = <0>;
+        };
+
+        phy@3 {
+          reg = <3>;
+          #phy-cells = <0>;
+        };
+      };
+    };
-- 
2.34.1