[PATCH RFC v3 5/5] ARM: dts: zte: Declare a zx297520v3 clock device nodes

[Stefan Dösinger]

This makes use of the driver added in the previous patches. It wires up
the uart clocks and resets and allows getting rid of the placeholder
uartclk node.

Signed-off-by: Stefan Dösinger <stefandoesinger@xxxxxxxxx>
---
 arch/arm/boot/dts/zte/zx297520v3.dtsi | 55 ++++++++++++++++++++++++++++++-----
 1 file changed, 47 insertions(+), 8 deletions(-)

diff --git a/arch/arm/boot/dts/zte/zx297520v3.dtsi b/arch/arm/boot/dts/zte/zx297520v3.dtsi
index a16c30a164bb..9d80740ccf8a 100644
--- a/arch/arm/boot/dts/zte/zx297520v3.dtsi
+++ b/arch/arm/boot/dts/zte/zx297520v3.dtsi
@@ -4,6 +4,7 @@
  */
 
 #include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/clock/zte,zx297520v3-clk.h>
 
 / {
 	#address-cells = <1>;
@@ -20,13 +21,16 @@ cpu@0 {
 		};
 	};
 
-	/* Base bus clock and default for the UART. It will be replaced once a clock driver has
-	 * been added.
-	 */
-	uartclk: uartclk-26000000 {
-		#clock-cells = <0>;
+	osc26m: osc26m {
 		compatible = "fixed-clock";
 		clock-frequency = <26000000>;
+		#clock-cells = <0>;
+	};
+
+	osc32k: osc32k {
+		compatible = "fixed-clock";
+		clock-frequency = <32768>;
+		#clock-cells = <0>;
 	};
 
 	timer {
@@ -70,13 +74,46 @@ gic: interrupt-controller@f2000000 {
 			      <0xf2040000 0x20000>;
 		};
 
+
+		topclk: clk@13b000 {
+			compatible = "zte,zx297520v3-topclk";
+			reg = <0x0013b000 0x400>,
+			      <0x01306000 0x400>;
+			reg-names = "top", "matrix";
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+			clocks = <&osc26m>, <&osc32k>;
+			clock-names = "osc26m", "osc32k";
+		};
+
+		lspclk: clk@1400000 {
+			compatible = "zte,zx297520v3-lspclk";
+			reg = <0x01400000 0x100>;
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+
+			clocks = <&topclk ZX297520V3_LSP_MPLL_D5_WCLK>,
+				 <&topclk ZX297520V3_LSP_MPLL_D4_WCLK>,
+				 <&topclk ZX297520V3_LSP_MPLL_D6_WCLK>,
+				 <&topclk ZX297520V3_LSP_MPLL_D8_WCLK>,
+				 <&topclk ZX297520V3_LSP_MPLL_D12_WCLK>,
+				 <&topclk ZX297520V3_LSP_OSC26M_WCLK>,
+				 <&topclk ZX297520V3_LSP_OSC32K_WCLK>,
+				 <&topclk ZX297520V3_LSP_PCLK>,
+				 <&topclk ZX297520V3_LSP_TDM_WCLK>,
+				 <&topclk ZX297520V3_LSP_DPLL_D4_WCLK>;
+			clock-names = "mpll_d5", "mpll_d4", "mpll_d6", "mpll_d8", "mpll_d12",
+				      "osc26m", "osc32k", "pclk", "tdm_wclk", "dpll_d4";
+		};
+
 		uart0: serial@131000 {
 			compatible = "arm,pl011", "arm,primecell";
 			arm,primecell-periphid = <0x0018c011>;
 			reg = <0x00131000 0x1000>;
 			interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&uartclk>, <&uartclk>;
+			clocks = <&topclk ZX297520V3_UART0_WCLK>, <&topclk ZX297520V3_UART0_PCLK>;
 			clock-names = "uartclk", "apb_pclk";
+			resets = <&topclk ZX297520V3_UART0_RESET>;
 			status = "disabled";
 		};
 
@@ -85,8 +122,9 @@ uart1: serial@1408000 {
 			arm,primecell-periphid = <0x0018c011>;
 			reg = <0x01408000 0x1000>;
 			interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&uartclk>, <&uartclk>;
+			clocks = <&lspclk ZX297520V3_UART1_WCLK>, <&lspclk ZX297520V3_UART1_PCLK>;
 			clock-names = "uartclk", "apb_pclk";
+			resets = <&lspclk ZX297520V3_UART1_RESET>;
 			status = "disabled";
 		};
 
@@ -95,8 +133,9 @@ uart2: serial@140d000 {
 			arm,primecell-periphid = <0x0018c011>;
 			reg = <0x0140d000 0x1000>;
 			interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&uartclk>, <&uartclk>;
+			clocks = <&lspclk ZX297520V3_UART2_WCLK>, <&lspclk ZX297520V3_UART2_PCLK>;
 			clock-names = "uartclk", "apb_pclk";
+			resets = <&lspclk ZX297520V3_UART2_RESET>;
 			status = "disabled";
 		};
 	};

-- 
2.53.0