[PATCH v2] arm64: dts: renesas: r9a08g046l48-smarc: Enable rsci{1,2,3} nodes

[Biju]

From: Biju Das <biju.das.jz@xxxxxxxxxxxxxx>

Enable rsci{1,2,3} device nodes for the RZ/G3L SMARC EVK.

Signed-off-by: Biju Das <biju.das.jz@xxxxxxxxxxxxxx>
---
v1->v2:
 * Dropped SW_SER0_PMOD macro check in rsci2 as it is always available
   for use.
---
 .../boot/dts/renesas/r9a08g046l48-smarc.dts   | 59 +++++++++++++++++++
 1 file changed, 59 insertions(+)

diff --git a/arch/arm64/boot/dts/renesas/r9a08g046l48-smarc.dts b/arch/arm64/boot/dts/renesas/r9a08g046l48-smarc.dts
index 32d3b08a3cf3..3ce24b66cb8d 100644
--- a/arch/arm64/boot/dts/renesas/r9a08g046l48-smarc.dts
+++ b/arch/arm64/boot/dts/renesas/r9a08g046l48-smarc.dts
@@ -13,6 +13,7 @@
 #define SW_DPI_EN		0
 #define SW_GPIO4		1
 #define SW_I3C_EN		0
+#define SW_SER0_PMOD		1
 
 #define PMOD_GPIO4		0
 #define PMOD_GPIO6		0
@@ -37,6 +38,9 @@ / {
 	aliases {
 		i2c2 = &i2c2;
 		i2c3 = &i2c3;
+		serial0 = &rsci2;
+		serial1 = &rsci3;
+		serial2 = &rsci1;
 		serial3 = &scif0;
 	};
 
@@ -134,6 +138,30 @@ i2c3_pins: i2c3 {
 			 <RZG3L_PORT_PINMUX(2, 1, 4)>; /* RIIC3_SDA */
 	};
 
+	rsci1_pins: rsci1 {
+		pinmux = <RZG3L_PORT_PINMUX(D, 4, 5)>, /* RSCI1_RXD_MISO_SCL */
+			 <RZG3L_PORT_PINMUX(D, 5, 5)>, /* RSCI1_TXD_MOSI_SDA */
+			 <RZG3L_PORT_PINMUX(D, 6, 6)>, /* RSCI1_CTS */
+			 <RZG3L_PORT_PINMUX(D, 7, 5)>; /* RSCI1_SS_CTS#_RTS# */
+		bias-pull-up;
+	};
+
+	rsci2_pins: rsci2 {
+		pinmux = <RZG3L_PORT_PINMUX(7, 6, 5)>, /* RSCI2_RXD_MISO_SCL */
+			 <RZG3L_PORT_PINMUX(7, 7, 5)>, /* RSCI2_TXD_MOSI_SDA */
+			 <RZG3L_PORT_PINMUX(8, 0, 6)>, /* RSCI2_CTS */
+			 <RZG3L_PORT_PINMUX(8, 1, 5)>; /* RSCI2_SS_CTS#_RTS# */
+		bias-pull-up;
+		power-source = <1800>;
+	};
+
+	rsci3_pins: rsci3 {
+		pinmux = <RZG3L_PORT_PINMUX(8, 2, 5)>, /* RSCI3_RXD_MISO_SCL */
+			 <RZG3L_PORT_PINMUX(8, 3, 5)>; /* RSCI3_TXD_MOSI_SDA */
+		bias-pull-up;
+		power-source = <1800>;
+	};
+
 	scif0_pins: scif0 {
 		pins = "SCIF0_TXD", "SCIF0_RXD";
 		power-source = <1800>;
@@ -147,6 +175,37 @@ ssi0_pins: ssi0 {
 	};
 };
 
+#if SW_SER0_PMOD
+&rsci1 {
+	pinctrl-0 = <&rsci1_pins>;
+	pinctrl-names = "default";
+
+	uart-has-rtscts;
+
+	status = "okay";
+};
+#endif
+
+#if !SW_DPI_EN
+&rsci2 {
+	pinctrl-0 = <&rsci2_pins>;
+	pinctrl-names = "default";
+
+	uart-has-rtscts;
+
+	status = "okay";
+};
+#endif
+
+#if (!SW_DPI_EN)
+&rsci3 {
+	pinctrl-0 = <&rsci3_pins>;
+	pinctrl-names = "default";
+
+	status = "okay";
+};
+#endif
+
 &scif0 {
 	pinctrl-0 = <&scif0_pins>;
 	pinctrl-names = "default";
-- 
2.43.0