[PATCH v2 1/2] arm64: dts: rockchip: describe PCIe Ethernet controllers on NanoPC-T6

[Ricardo Pardini via B4 Relay]

From: Ricardo Pardini <ricardo@xxxxxxxxxxx>

The FriendlyElec NanoPC-T6 carries two on-board Realtek RTL8125BG
(r8169 family, PCI 10ec:8125) NICs, each behind its own RK3588 PCIe2x1
controller (pcie2x1l0 and pcie2x1l2). Both host bridges were already
enabled by the board DT, but the Ethernet function nodes themselves
were not described, leaving the kernel without DT handles on the two
NICs.

Describe the fixed PCI function nodes and attach ethernet0/ethernet1
aliases to them.

Signed-off-by: Ricardo Pardini <ricardo@xxxxxxxxxxx>
---
 arch/arm64/boot/dts/rockchip/rk3588-nanopc-t6.dtsi | 30 ++++++++++++++++++++++
 1 file changed, 30 insertions(+)

diff --git a/arch/arm64/boot/dts/rockchip/rk3588-nanopc-t6.dtsi b/arch/arm64/boot/dts/rockchip/rk3588-nanopc-t6.dtsi
index 84b6b53f016ab..04c4479f08170 100644
--- a/arch/arm64/boot/dts/rockchip/rk3588-nanopc-t6.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3588-nanopc-t6.dtsi
@@ -20,6 +20,8 @@ / {
 	compatible = "friendlyarm,nanopc-t6", "rockchip,rk3588";
 
 	aliases {
+		ethernet0 = &rtl_eth0;
+		ethernet1 = &rtl_eth1;
 		mmc0 = &sdhci;
 		mmc1 = &sdmmc;
 	};
@@ -635,6 +637,20 @@ &pcie2x1l0 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pcie2_0_rst>;
 	status = "okay";
+
+	pcie@0,0 {
+		reg = <0x200000 0 0 0 0>;
+		#address-cells = <3>;
+		#size-cells = <2>;
+		ranges;
+		device_type = "pci";
+		bus-range = <0x20 0x2f>;
+
+		rtl_eth0: ethernet@0,0 {
+			compatible = "pci10ec,8125";
+			reg = <0x210000 0 0 0 0>;
+		};
+	};
 };
 
 &pcie2x1l1 {
@@ -651,6 +667,20 @@ &pcie2x1l2 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pcie2_2_rst>;
 	status = "okay";
+
+	pcie@0,0 {
+		reg = <0x400000 0 0 0 0>;
+		#address-cells = <3>;
+		#size-cells = <2>;
+		ranges;
+		device_type = "pci";
+		bus-range = <0x40 0x4f>;
+
+		rtl_eth1: ethernet@0,0 {
+			compatible = "pci10ec,8125";
+			reg = <0x410000 0 0 0 0>;
+		};
+	};
 };
 
 &pcie30phy {

-- 
2.54.0