[PATCH net-next v3 04/14] net: ethernet: oa_tc6: Move constant definitions to header file
From: Selvamani Rajagopal
Date: Fri May 29 2026 - 15:02:20 EST
To prepare for other files to share the constant definitions, moving
them from the source file to its own header file.
Signed-off-by: Selvamani Rajagopal <Selvamani.Rajagopal@xxxxxxxxxx>
---
drivers/net/ethernet/oa_tc6/oa_tc6.c | 145 +---------------
drivers/net/ethernet/oa_tc6/oa_tc6_std_def.h | 166 +++++++++++++++++++
2 files changed, 167 insertions(+), 144 deletions(-)
create mode 100644 drivers/net/ethernet/oa_tc6/oa_tc6_std_def.h
diff --git a/drivers/net/ethernet/oa_tc6/oa_tc6.c b/drivers/net/ethernet/oa_tc6/oa_tc6.c
index 91a906a7918a..c7d70d37ba53 100644
--- a/drivers/net/ethernet/oa_tc6/oa_tc6.c
+++ b/drivers/net/ethernet/oa_tc6/oa_tc6.c
@@ -11,150 +11,7 @@
#include <linux/phy.h>
#include <linux/oa_tc6.h>
-/* OPEN Alliance TC6 registers */
-/* Standard Capabilities Register */
-#define OA_TC6_REG_STDCAP 0x0002
-#define STDCAP_DIRECT_PHY_REG_ACCESS BIT(8)
-
-/* Reset Control and Status Register */
-#define OA_TC6_REG_RESET 0x0003
-#define RESET_SWRESET BIT(0) /* Software Reset */
-
-/* Configuration Register #0 */
-#define OA_TC6_REG_CONFIG0 0x0004
-#define CONFIG0_SYNC BIT(15)
-#define CONFIG0_ZARFE_ENABLE BIT(12)
-
-/* Status Register #0 */
-#define OA_TC6_REG_STATUS0 0x0008
-#define STATUS0_RESETC BIT(6) /* Reset Complete */
-#define STATUS0_HEADER_ERROR BIT(5)
-#define STATUS0_LOSS_OF_FRAME_ERROR BIT(4)
-#define STATUS0_RX_BUFFER_OVERFLOW_ERROR BIT(3)
-#define STATUS0_TX_PROTOCOL_ERROR BIT(0)
-
-/* Buffer Status Register */
-#define OA_TC6_REG_BUFFER_STATUS 0x000B
-#define BUFFER_STATUS_TX_CREDITS_AVAILABLE GENMASK(15, 8)
-#define BUFFER_STATUS_RX_CHUNKS_AVAILABLE GENMASK(7, 0)
-
-/* Interrupt Mask Register #0 */
-#define OA_TC6_REG_INT_MASK0 0x000C
-#define INT_MASK0_HEADER_ERR_MASK BIT(5)
-#define INT_MASK0_LOSS_OF_FRAME_ERR_MASK BIT(4)
-#define INT_MASK0_RX_BUFFER_OVERFLOW_ERR_MASK BIT(3)
-#define INT_MASK0_TX_PROTOCOL_ERR_MASK BIT(0)
-
-/* PHY Clause 22 registers base address and mask */
-#define OA_TC6_PHY_STD_REG_ADDR_BASE 0xFF00
-#define OA_TC6_PHY_STD_REG_ADDR_MASK 0x1F
-
-/* Control command header */
-#define OA_TC6_CTRL_HEADER_DATA_NOT_CTRL BIT(31)
-#define OA_TC6_CTRL_HEADER_WRITE_NOT_READ BIT(29)
-#define OA_TC6_CTRL_HEADER_MEM_MAP_SELECTOR GENMASK(27, 24)
-#define OA_TC6_CTRL_HEADER_ADDR GENMASK(23, 8)
-#define OA_TC6_CTRL_HEADER_LENGTH GENMASK(7, 1)
-#define OA_TC6_CTRL_HEADER_PARITY BIT(0)
-
-/* Data header */
-#define OA_TC6_DATA_HEADER_DATA_NOT_CTRL BIT(31)
-#define OA_TC6_DATA_HEADER_DATA_VALID BIT(21)
-#define OA_TC6_DATA_HEADER_START_VALID BIT(20)
-#define OA_TC6_DATA_HEADER_START_WORD_OFFSET GENMASK(19, 16)
-#define OA_TC6_DATA_HEADER_END_VALID BIT(14)
-#define OA_TC6_DATA_HEADER_END_BYTE_OFFSET GENMASK(13, 8)
-#define OA_TC6_DATA_HEADER_PARITY BIT(0)
-
-/* Data footer */
-#define OA_TC6_DATA_FOOTER_EXTENDED_STS BIT(31)
-#define OA_TC6_DATA_FOOTER_RXD_HEADER_BAD BIT(30)
-#define OA_TC6_DATA_FOOTER_CONFIG_SYNC BIT(29)
-#define OA_TC6_DATA_FOOTER_RX_CHUNKS GENMASK(28, 24)
-#define OA_TC6_DATA_FOOTER_DATA_VALID BIT(21)
-#define OA_TC6_DATA_FOOTER_START_VALID BIT(20)
-#define OA_TC6_DATA_FOOTER_START_WORD_OFFSET GENMASK(19, 16)
-#define OA_TC6_DATA_FOOTER_END_VALID BIT(14)
-#define OA_TC6_DATA_FOOTER_END_BYTE_OFFSET GENMASK(13, 8)
-#define OA_TC6_DATA_FOOTER_TX_CREDITS GENMASK(5, 1)
-
-/* PHY – Clause 45 registers memory map selector (MMS) as per table 6 in the
- * OPEN Alliance specification.
- */
-#define OA_TC6_PHY_C45_PCS_MMS2 2 /* MMD 3 */
-#define OA_TC6_PHY_C45_PMA_PMD_MMS3 3 /* MMD 1 */
-#define OA_TC6_PHY_C45_VS_PLCA_MMS4 4 /* MMD 31 */
-#define OA_TC6_PHY_C45_AUTO_NEG_MMS5 5 /* MMD 7 */
-#define OA_TC6_PHY_C45_POWER_UNIT_MMS6 6 /* MMD 13 */
-
-#define OA_TC6_CTRL_HEADER_SIZE 4
-#define OA_TC6_CTRL_REG_VALUE_SIZE 4
-#define OA_TC6_CTRL_IGNORED_SIZE 4
-#define OA_TC6_CTRL_MAX_REGISTERS 128
-#define OA_TC6_CTRL_SPI_BUF_SIZE (OA_TC6_CTRL_HEADER_SIZE +\
- (OA_TC6_CTRL_MAX_REGISTERS *\
- OA_TC6_CTRL_REG_VALUE_SIZE) +\
- OA_TC6_CTRL_IGNORED_SIZE)
-#define OA_TC6_CHUNK_PAYLOAD_SIZE 64
-#define OA_TC6_DATA_HEADER_SIZE 4
-#define OA_TC6_CHUNK_SIZE (OA_TC6_DATA_HEADER_SIZE +\
- OA_TC6_CHUNK_PAYLOAD_SIZE)
-#define OA_TC6_MAX_TX_CHUNKS 48
-#define OA_TC6_SPI_DATA_BUF_SIZE (OA_TC6_MAX_TX_CHUNKS *\
- OA_TC6_CHUNK_SIZE)
-#define STATUS0_RESETC_POLL_DELAY 1000
-#define STATUS0_RESETC_POLL_TIMEOUT 1000000
-
-/* Internal structure for MAC-PHY drivers */
-struct oa_tc6 {
- struct device *dev;
- struct net_device *netdev;
- struct phy_device *phydev;
- struct mii_bus *mdiobus;
- struct spi_device *spi;
- struct mutex spi_ctrl_lock; /* Protects spi control transfer */
- spinlock_t tx_skb_lock; /* Protects tx skb handling */
- void *spi_ctrl_tx_buf;
- void *spi_ctrl_rx_buf;
- void *spi_data_tx_buf;
- void *spi_data_rx_buf;
- struct sk_buff *ongoing_tx_skb;
- struct sk_buff *waiting_tx_skb;
- struct sk_buff *rx_skb;
- struct task_struct *spi_thread;
- wait_queue_head_t spi_wq;
- u16 tx_skb_offset;
- u16 spi_data_tx_buf_offset;
- u16 tx_credits;
- u8 rx_chunks_available;
- bool rx_buf_overflow;
- bool int_flag;
-};
-
-enum oa_tc6_header_type {
- OA_TC6_CTRL_HEADER,
- OA_TC6_DATA_HEADER,
-};
-
-enum oa_tc6_register_op {
- OA_TC6_CTRL_REG_READ = 0,
- OA_TC6_CTRL_REG_WRITE = 1,
-};
-
-enum oa_tc6_data_valid_info {
- OA_TC6_DATA_INVALID,
- OA_TC6_DATA_VALID,
-};
-
-enum oa_tc6_data_start_valid_info {
- OA_TC6_DATA_START_INVALID,
- OA_TC6_DATA_START_VALID,
-};
-
-enum oa_tc6_data_end_valid_info {
- OA_TC6_DATA_END_INVALID,
- OA_TC6_DATA_END_VALID,
-};
+#include "oa_tc6_std_def.h"
static int oa_tc6_spi_transfer(struct oa_tc6 *tc6,
enum oa_tc6_header_type header_type, u16 length)
diff --git a/drivers/net/ethernet/oa_tc6/oa_tc6_std_def.h b/drivers/net/ethernet/oa_tc6/oa_tc6_std_def.h
new file mode 100644
index 000000000000..fdde9ba719bf
--- /dev/null
+++ b/drivers/net/ethernet/oa_tc6/oa_tc6_std_def.h
@@ -0,0 +1,166 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Register and driver related definitions to support
+ * OPEN Alliance 10BASE‑T1x MAC‑PHY Serial Interface framework.
+ *
+ * Author: Selva Rajagopal <selvamani.rajagopal@xxxxxxxxxx>
+ */
+
+#ifndef OA_TC6_STD_DEF_H
+#define OA_TC6_STD_DEF_H
+
+#include <linux/ptp_clock_kernel.h>
+#include <linux/net_tstamp.h>
+#include <linux/netdevice.h>
+#include <linux/spi/spi.h>
+#include <linux/skbuff.h>
+#include <linux/sched.h>
+#include <linux/wait.h>
+#include <linux/phy.h>
+
+/* OPEN Alliance TC6 registers */
+/* Standard Capabilities Register */
+#define OA_TC6_REG_STDCAP 0x0002
+#define STDCAP_DIRECT_PHY_REG_ACCESS BIT(8)
+
+/* Reset Control and Status Register */
+#define OA_TC6_REG_RESET 0x0003
+#define RESET_SWRESET BIT(0) /* Software Reset */
+
+/* Configuration Register #0 */
+#define OA_TC6_REG_CONFIG0 0x0004
+#define CONFIG0_SYNC BIT(15)
+#define CONFIG0_ZARFE_ENABLE BIT(12)
+
+/* Status Register #0 */
+#define OA_TC6_REG_STATUS0 0x0008
+#define STATUS0_RESETC BIT(6) /* Reset Complete */
+#define STATUS0_HEADER_ERROR BIT(5)
+#define STATUS0_LOSS_OF_FRAME_ERROR BIT(4)
+#define STATUS0_RX_BUFFER_OVERFLOW_ERROR BIT(3)
+#define STATUS0_TX_PROTOCOL_ERROR BIT(0)
+
+/* Buffer Status Register */
+#define OA_TC6_REG_BUFFER_STATUS 0x000B
+#define BUFFER_STATUS_TX_CREDITS_AVAILABLE GENMASK(15, 8)
+#define BUFFER_STATUS_RX_CHUNKS_AVAILABLE GENMASK(7, 0)
+
+/* Interrupt Mask Register #0 */
+#define OA_TC6_REG_INT_MASK0 0x000C
+#define INT_MASK0_HEADER_ERR_MASK BIT(5)
+#define INT_MASK0_LOSS_OF_FRAME_ERR_MASK BIT(4)
+#define INT_MASK0_RX_BUFFER_OVERFLOW_ERR_MASK BIT(3)
+#define INT_MASK0_TX_PROTOCOL_ERR_MASK BIT(0)
+
+/* PHY Clause 22 registers base address and mask */
+#define OA_TC6_PHY_STD_REG_ADDR_BASE 0xFF00
+#define OA_TC6_PHY_STD_REG_ADDR_MASK 0x1F
+
+/* Control command header */
+#define OA_TC6_CTRL_HEADER_DATA_NOT_CTRL BIT(31)
+#define OA_TC6_CTRL_HEADER_WRITE_NOT_READ BIT(29)
+#define OA_TC6_CTRL_HEADER_MEM_MAP_SELECTOR GENMASK(27, 24)
+#define OA_TC6_CTRL_HEADER_ADDR GENMASK(23, 8)
+#define OA_TC6_CTRL_HEADER_LENGTH GENMASK(7, 1)
+#define OA_TC6_CTRL_HEADER_PARITY BIT(0)
+
+/* Data header */
+#define OA_TC6_DATA_HEADER_DATA_NOT_CTRL BIT(31)
+#define OA_TC6_DATA_HEADER_DATA_VALID BIT(21)
+#define OA_TC6_DATA_HEADER_START_VALID BIT(20)
+#define OA_TC6_DATA_HEADER_START_WORD_OFFSET GENMASK(19, 16)
+#define OA_TC6_DATA_HEADER_END_VALID BIT(14)
+#define OA_TC6_DATA_HEADER_END_BYTE_OFFSET GENMASK(13, 8)
+#define OA_TC6_DATA_HEADER_PARITY BIT(0)
+
+/* Data footer */
+#define OA_TC6_DATA_FOOTER_EXTENDED_STS BIT(31)
+#define OA_TC6_DATA_FOOTER_RXD_HEADER_BAD BIT(30)
+#define OA_TC6_DATA_FOOTER_CONFIG_SYNC BIT(29)
+#define OA_TC6_DATA_FOOTER_RX_CHUNKS GENMASK(28, 24)
+#define OA_TC6_DATA_FOOTER_DATA_VALID BIT(21)
+#define OA_TC6_DATA_FOOTER_START_VALID BIT(20)
+#define OA_TC6_DATA_FOOTER_START_WORD_OFFSET GENMASK(19, 16)
+#define OA_TC6_DATA_FOOTER_END_VALID BIT(14)
+#define OA_TC6_DATA_FOOTER_END_BYTE_OFFSET GENMASK(13, 8)
+#define OA_TC6_DATA_FOOTER_TX_CREDITS GENMASK(5, 1)
+
+/* PHY – Clause 45 registers memory map selector (MMS) as per table 6 in the
+ * OPEN Alliance specification.
+ */
+#define OA_TC6_PHY_C45_PCS_MMS2 2 /* MMD 3 */
+#define OA_TC6_PHY_C45_PMA_PMD_MMS3 3 /* MMD 1 */
+#define OA_TC6_PHY_C45_VS_PLCA_MMS4 4 /* MMD 31 */
+#define OA_TC6_PHY_C45_AUTO_NEG_MMS5 5 /* MMD 7 */
+#define OA_TC6_PHY_C45_POWER_UNIT_MMS6 6 /* MMD 13 */
+
+#define OA_TC6_CTRL_HEADER_SIZE 4
+#define OA_TC6_CTRL_REG_VALUE_SIZE 4
+#define OA_TC6_CTRL_IGNORED_SIZE 4
+#define OA_TC6_CTRL_MAX_REGISTERS 128
+#define OA_TC6_CTRL_SPI_BUF_SIZE (OA_TC6_CTRL_HEADER_SIZE +\
+ (OA_TC6_CTRL_MAX_REGISTERS *\
+ OA_TC6_CTRL_REG_VALUE_SIZE) +\
+ OA_TC6_CTRL_IGNORED_SIZE)
+#define OA_TC6_CHUNK_PAYLOAD_SIZE 64
+#define OA_TC6_DATA_HEADER_SIZE 4
+#define OA_TC6_CHUNK_SIZE (OA_TC6_DATA_HEADER_SIZE +\
+ OA_TC6_CHUNK_PAYLOAD_SIZE)
+#define OA_TC6_MAX_TX_CHUNKS 48
+#define OA_TC6_SPI_DATA_BUF_SIZE (OA_TC6_MAX_TX_CHUNKS *\
+ OA_TC6_CHUNK_SIZE)
+#define STATUS0_RESETC_POLL_DELAY 1000
+#define STATUS0_RESETC_POLL_TIMEOUT 1000000
+
+/* Internal structure for MAC-PHY drivers */
+struct oa_tc6 {
+ struct device *dev;
+ struct net_device *netdev;
+ struct phy_device *phydev;
+ struct mii_bus *mdiobus;
+ struct spi_device *spi;
+ struct mutex spi_ctrl_lock; /* Protects spi control transfer */
+ spinlock_t tx_skb_lock; /* Protects tx skb handling */
+ void *spi_ctrl_tx_buf;
+ void *spi_ctrl_rx_buf;
+ void *spi_data_tx_buf;
+ void *spi_data_rx_buf;
+ struct sk_buff *ongoing_tx_skb;
+ struct sk_buff *waiting_tx_skb;
+ struct sk_buff *rx_skb;
+ struct task_struct *spi_thread;
+ wait_queue_head_t spi_wq;
+ u16 tx_skb_offset;
+ u16 spi_data_tx_buf_offset;
+ u16 tx_credits;
+ u8 rx_chunks_available;
+ bool rx_buf_overflow;
+ bool int_flag;
+};
+
+enum oa_tc6_header_type {
+ OA_TC6_CTRL_HEADER,
+ OA_TC6_DATA_HEADER,
+};
+
+enum oa_tc6_register_op {
+ OA_TC6_CTRL_REG_READ = 0,
+ OA_TC6_CTRL_REG_WRITE = 1,
+};
+
+enum oa_tc6_data_valid_info {
+ OA_TC6_DATA_INVALID,
+ OA_TC6_DATA_VALID,
+};
+
+enum oa_tc6_data_start_valid_info {
+ OA_TC6_DATA_START_INVALID,
+ OA_TC6_DATA_START_VALID,
+};
+
+enum oa_tc6_data_end_valid_info {
+ OA_TC6_DATA_END_INVALID,
+ OA_TC6_DATA_END_VALID,
+};
+#endif /* OA_TC6_STD_DEF_H */
+
--
2.43.0