Re: [PATCH 1/2] dt-bindings: ufs: Document static TX Equalization settings properties

[Krzysztof Kozlowski]

On Wed, May 27, 2026 at 07:40:54AM -0700, Can Guo wrote:
> UFS v5.0/UFSHCI v5.0 add HS-G6 support (46.6 Gbps/lane) via UniPro v3.0
> and M-PHY v6.0. In these specs, TX Equalization is defined for all High
> Speed Gears (not only HS-G6) to compensate channel loss and improve signal
> integrity at high speed operation.
> 
> For HS-G6, M-PHY uses PAM4 1b1b line coding, Pre-Coding may also be
> required depending on channel characteristics.
> 
> Add vendor-neutral DT properties:
> 
> - patternProperties for txeq-preshoot-g[1-6] and txeq-deemphasis-g[1-6]
> - fixed property tx-precode-enable-g6
> 
> Each property is a uint32 array of per-lane tuples:
> <Host_Lane0 Device_Lane0>, [<Host_Lane1 Device_Lane1>]
> 
> Accept 2 or 4 values (x1/x2 lane configs). PreShoot and DeEmphasis values
> are 0..7. Precode enable values are 0/1 and only applicable to HS-G6.
> 

Why are they SIX versions within three days? I see this for the third
time in Patchwork already.


Best regards,
Krzysztof