Re: [PATCH v4 0/2] Add NXP FRDM-IMX95-PRO board support

[Joseph Guo (OSS)]

On 6/2/2026 12:57 AM, Frank Li wrote:
> On Mon, May 18, 2026 at 11:58:18AM +0900, Joseph Guo wrote:
>> This patchset add Devicetree support for NXP FRDM-IMX95-PRO
>> development board based on i.MX95 19x19 SoC.
>>
>> Signed-off-by: Joseph Guo <qijian.guo@xxxxxxx>
>> ---
>> Changes in v4:
>> - Correct underscores in node names
>> - Correct 'silent-gpio' of can_phy to GPIO_ACTIVE_HIGH
>> - Fix typo in pinctrl_pcal6416
>> - Link to v3: https://lore.kernel.org/r/20260509-imx95_frdm_pro-v3-0-96290b471396@xxxxxxx
>>
>> Changes in v3:
>> - Change status of CAN1 to reserved
>> - Remove unused pinctrl
>> - Explain difference with i.MX95 15x15 FRDM in message
>> - Link to v2: https://lore.kernel.org/r/20260428-imx95_frdm_pro-v2-0-434240b652f4@xxxxxxx
>>
>> Changes in v2:
>> - Run dt-format to reformat the node order
>> - Change compatible of mqs to audio-graph-card2
>> - Add imx95-19x19-frdm-pro in Makefile
>> - Link to v1: https://lore.kernel.org/r/20260318-imx95_frdm_pro-v1-0-8c00e59f0b1b@xxxxxxx
>>
>> ---
>> Joseph Guo (2):
>>       dt-bindings: arm: fsl: Add i.MX95 19x19 FRDM PRO board
>>       arm64: dts: freescale: add i.MX95 19x19 FRDM PRO board dts
>>
>>  Documentation/devicetree/bindings/arm/fsl.yaml     |    1 +
>>  arch/arm64/boot/dts/freescale/Makefile             |    1 +
>>  .../boot/dts/freescale/imx95-19x19-frdm-pro.dts    | 1021 ++++++++++++++++++++
>>  3 files changed, 1023 insertions(+)
>> ---
>> base-commit: 7109a2155340cc7b21f27e832ece6df03592f2e8

Hi Frank,

My patchset is based on linux-next.
V5 rebase on imx/dt64 has been sent.

Regards,
Joseph
> 
> where this commit hash? I can't apply whole patch and can't find this
> commit.
> 
> Can you rebase to https://git.kernel.org/pub/scm/linux/kernel/git/frank.li/linux.git/log/?h=imx/dt64
> 
> Frank
> 
>> change-id: 20260311-imx95_frdm_pro-7a8d03b50982
>>
>> Best regards,
>> --
>> Joseph Guo <qijian.guo@xxxxxxx>
>>