Re: [PATCH v8 0/6] arm64: dts: qcom: Support AYN QCS8550 Devices

[Aaron Kling]

On Sun, May 3, 2026 at 4:49 PM Aaron Kling via B4 Relay
<devnull+webgeek1234.gmail.com@xxxxxxxxxx> wrote:
>
> This specifically includes:
> * Odin 2 Mini
> * Odin 2 Portal
> * Thor
>
> The original Odin 2 dts is not currently included as it has not yet
> been verified.
>
> The initial port was done by Teguh Sobirin for ROCKNIX and was made
> available on the AYN github [0].
>
> Support has been removed for things not yet supported by the upstream
> kernel, these will be added later when the related drivers are submitted
> and picked up. Such includes:
>
> * All panels
> * The Odin 2 Mini backlight and touch
> * All rgb leds
> * The built-in uart gamepad
>
> [0] https://github.com/AYNTechnologies/linux/commits/sm8550/v6.17.5/
>
> Signed-off-by: Aaron Kling <webgeek1234@xxxxxxxxx>
> ---
> Changes in v8:
> - Properly order and format amplifier properties
> - Set amplifiers name prefix to Amplifier L/R
> - Link to v7: https://lore.kernel.org/r/20260430-ayn-qcs8550-v7-0-591a96735fa3@xxxxxxxxx
>
> Changes in v7:
> - Add back pinmuxes dropped last revision, but without output-low
> - Link to v6: https://lore.kernel.org/r/20260430-ayn-qcs8550-v6-0-06a7e7b54aaa@xxxxxxxxx
>
> Changes in v6:
> - Fix comment style in patch 3
> - Drop a pair of unnecessary pinmuxes in patch 3
> - Lower usb sbu pins drive strength in patch 3
> - Link to v5: https://lore.kernel.org/r/20260408-ayn-qcs8550-v5-0-c90abeb7a152@xxxxxxxxx
>
> Changes in v5:
> - Fix some style reviews in patch 6 which required matching labels in
>   patch 3
> - Drop hdmi support in patch 4, since it doesn't work
> - Link to v4: https://lore.kernel.org/r/20260323-ayn-qcs8550-v4-0-33a8ac3d53fa@xxxxxxxxx
>
> Changes in v4:
> - Fold vendor description patch into the series
> - Link to v3: https://lore.kernel.org/r/20260322-ayn-qcs8550-v3-0-4afa89c20888@xxxxxxxxx
>
> Changes in v3:
> - Drop unused backlight regulator in patch 3
> - Move zap shader firmware to standalone reference
> - Move i2c controller enables from common to devices
> - Add ABL dtbo workarounds to patch 2 as per:
>   https://lore.kernel.org/linux-arm-msm/dczz4uvcq4hc6p3zb6xnrsgmfeomwliagwhf36tewdz4z6mndp@afbxzhjziiwv/
> - Fix multiple property alphabetical order issues in patch 2
> - Use interrupts-extended for pwm-fan in patch 2
> - Ensure blank line before status in patches 2-5
> - Rename spk_amp_l/r to amplifier in patch 2
> - Remove a few properties that are already in the soc dtsi in patch 2
> - Order tlmm nodes by pin index in patch 2
> - Drop qcom,dll-config from sdhc node in patch 2
> - Drop dtbo support, convert common to dtsi, and include it directly in
>   device specific dts'
> - Link to v2: https://lore.kernel.org/r/20260311-ayn-qcs8550-v2-0-e66986e0f0cb@xxxxxxxxx
>
> Changes in v2:
> - Drop awinic bindings dep as a duplicated patch already exists
> - Change Co-authored-by tags to Co-developed-by
> - Drop alias to currently unused uart15 in patch 2
> - Link to v1: https://lore.kernel.org/r/20260311-ayn-qcs8550-v1-0-fe8b2faad1ea@xxxxxxxxx
>
> ---
> Aaron Kling (1):
>       dt-bindings: arm: qcom: Add AYN QCS8550 Devices
>
> Teguh Sobirin (4):
>       arm64: dts: qcom: Add AYN QCS8550 Common
>       arm64: dts: qcom: Add AYN Odin 2 Mini
>       arm64: dts: qcom: Add AYN Odin 2 Portal
>       arm64: dts: qcom: Add AYN Thor
>
> Xilin Wu (1):
>       dt-bindings: vendor-prefixes: Add AYN Technologies
>
>  Documentation/devicetree/bindings/arm/qcom.yaml    |    9 +
>  .../devicetree/bindings/vendor-prefixes.yaml       |    2 +
>  arch/arm64/boot/dts/qcom/Makefile                  |    3 +
>  .../arm64/boot/dts/qcom/qcs8550-ayntec-common.dtsi | 1764 ++++++++++++++++++++
>  .../boot/dts/qcom/qcs8550-ayntec-odin2mini.dts     |   44 +
>  .../boot/dts/qcom/qcs8550-ayntec-odin2portal.dts   |   84 +
>  arch/arm64/boot/dts/qcom/qcs8550-ayntec-thor.dts   |  227 +++
>  7 files changed, 2133 insertions(+)
> ---
> base-commit: b9303e6bff706758c167af686b5315ad00233bf8
> change-id: 20260217-ayn-qcs8550-16c07b63de26
>
> Best regards,
> --
> Aaron Kling <webgeek1234@xxxxxxxxx>

Is there anything else I need to do for this series? Or is it just
waiting to be picked up now?

Aaron