[PATCH v6 1/2] dt-bindings: phy: add support for NXPs TJA1145 CAN transceiver

[Dimitri Fedrau via B4 Relay]

From: Dimitri Fedrau <dimitri.fedrau@xxxxxxxxxxxx>

Adding documentation for NXPs TJA1145 CAN transceiver, which resides like
the ti,tcan104x-can.yaml in the same directory as other generic PHY
subsystem bindings. At the moment there is only support for simple PHYs
by using regulator bindings in combination with can-transceiver.yaml or
PHYs that implement the generic PHY subsystem like the NXP TJA1145.

Reviewed-by: Conor Dooley <conor.dooley@xxxxxxxxxxxxx>
Signed-off-by: Dimitri Fedrau <dimitri.fedrau@xxxxxxxxxxxx>
---
 .../devicetree/bindings/phy/nxp,tja1145.yaml       | 86 ++++++++++++++++++++++
 1 file changed, 86 insertions(+)

diff --git a/Documentation/devicetree/bindings/phy/nxp,tja1145.yaml b/Documentation/devicetree/bindings/phy/nxp,tja1145.yaml
new file mode 100644
index 0000000000000000000000000000000000000000..fb068f7d774f3c92dea7725416e9c3e038e06e2d
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/nxp,tja1145.yaml
@@ -0,0 +1,86 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/phy/nxp,tja1145.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: TJA1145 CAN transceiver
+
+maintainers:
+  - Dimitri Fedrau <dimitri.fedrau@xxxxxxxxxxxx>
+
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+properties:
+  compatible:
+    const: nxp,tja1145
+
+  interrupts:
+    maxItems: 1
+
+  reg:
+    maxItems: 1
+
+  "#phy-cells":
+    const: 0
+
+  spi-cpha: true
+
+  spi-max-frequency:
+    maximum: 4000000
+
+  spi-cs-setup-delay-ns:
+    minimum: 50
+    default: 50
+
+  spi-cs-hold-delay-ns:
+    minimum: 50
+    default: 50
+
+  spi-cs-inactive-delay-ns:
+    minimum: 250
+    default: 250
+
+  vcc-supply:
+    description:
+      CAN transceiver supply voltage
+
+  vio-supply:
+    description:
+      Supply voltage for I/O level adaptor
+
+  vbat-supply:
+    description:
+      Battery supply voltage
+
+required:
+  - compatible
+  - reg
+  - "#phy-cells"
+  - spi-cpha
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        can-phy@0 {
+            compatible = "nxp,tja1145";
+            interrupt-parent = <&gpio0>;
+            interrupts = <31 IRQ_TYPE_LEVEL_LOW>;
+            reg = <0>;
+            #phy-cells = <0>;
+            spi-cpha;
+            spi-max-frequency = <4000000>;
+            spi-cs-setup-delay-ns = <50>;
+            spi-cs-hold-delay-ns = <50>;
+            spi-cs-inactive-delay-ns = <250>;
+            vcc-supply = <&reg_5v0>;
+            vio-supply = <&reg_3v3>;
+            vbat-supply = <&reg_24v0>;
+        };
+    };

-- 
2.39.5