[PATCH v2 2/5] ASoC: rockchip: spdif: Reorder clock enable sequence

[phucduc . bui]

From: bui duc phuc <phucduc.bui@xxxxxxxxx>

Enable the 'hclk' bus clock before the 'mclk' controller clock during
runtime resume.
The bus clock provides the register access interface, so enable it before
the controller clock. This also makes the resume sequence the reverse of
the suspend sequence, which keeps the clock ordering consistent.

Signed-off-by: bui duc phuc <phucduc.bui@xxxxxxxxx>
---

NOTE: This patch is compile-tested only. Please help test if you have 
    the relevant Rockchip hardware.
Changes in v2:
  - Clarify in the commit message that the resume sequence becomes the
    reverse of the suspend sequence.

 sound/soc/rockchip/rockchip_spdif.c | 10 +++++-----
 1 file changed, 5 insertions(+), 5 deletions(-)

diff --git a/sound/soc/rockchip/rockchip_spdif.c b/sound/soc/rockchip/rockchip_spdif.c
index 581624f2682e..8de5b76cfe79 100644
--- a/sound/soc/rockchip/rockchip_spdif.c
+++ b/sound/soc/rockchip/rockchip_spdif.c
@@ -76,16 +76,16 @@ static int rk_spdif_runtime_resume(struct device *dev)
 	struct rk_spdif_dev *spdif = dev_get_drvdata(dev);
 	int ret;
 
-	ret = clk_prepare_enable(spdif->mclk);
+	ret = clk_prepare_enable(spdif->hclk);
 	if (ret) {
-		dev_err(spdif->dev, "mclk clock enable failed %d\n", ret);
+		dev_err(spdif->dev, "hclk clock enable failed %d\n", ret);
 		return ret;
 	}
 
-	ret = clk_prepare_enable(spdif->hclk);
+	ret = clk_prepare_enable(spdif->mclk);
 	if (ret) {
-		clk_disable_unprepare(spdif->mclk);
-		dev_err(spdif->dev, "hclk clock enable failed %d\n", ret);
+		clk_disable_unprepare(spdif->hclk);
+		dev_err(spdif->dev, "mclk clock enable failed %d\n", ret);
 		return ret;
 	}
 
-- 
2.43.0