[PATCH 2/2] arm64: dts: qcom: ipq5424: Move PHYs and PERST# to Root Port node

[Kathiravan Thirumoorthy]

Follow the new binding style by defining PHYs and PERST# (now RESET#)
under the Root Port node. Avoid mixing styles and move these properties
to the RP node.

Signed-off-by: Kathiravan Thirumoorthy <kathiravan.thirumoorthy@xxxxxxxxxxxxxxxx>
---
 arch/arm64/boot/dts/qcom/ipq5424-rdp466.dts | 12 ++++++++----
 arch/arm64/boot/dts/qcom/ipq5424.dtsi       | 20 ++++++++------------
 2 files changed, 16 insertions(+), 16 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/ipq5424-rdp466.dts b/arch/arm64/boot/dts/qcom/ipq5424-rdp466.dts
index de71b72ae6dc..be8657239c46 100644
--- a/arch/arm64/boot/dts/qcom/ipq5424-rdp466.dts
+++ b/arch/arm64/boot/dts/qcom/ipq5424-rdp466.dts
@@ -86,8 +86,6 @@ &pcie2 {
 	pinctrl-0 = <&pcie2_default_state>;
 	pinctrl-names = "default";
 
-	perst-gpios = <&tlmm 31 GPIO_ACTIVE_LOW>;
-
 	status = "okay";
 };
 
@@ -95,12 +93,14 @@ &pcie2_phy {
 	status = "okay";
 };
 
+&pcie2_port0 {
+	reset-gpios = <&tlmm 31 GPIO_ACTIVE_LOW>;
+};
+
 &pcie3 {
 	pinctrl-0 = <&pcie3_default_state>;
 	pinctrl-names = "default";
 
-	perst-gpios = <&tlmm 34 GPIO_ACTIVE_LOW>;
-
 	status = "okay";
 };
 
@@ -108,6 +108,10 @@ &pcie3_phy {
 	status = "okay";
 };
 
+&pcie3_port0 {
+	reset-gpios = <&tlmm 34 GPIO_ACTIVE_LOW>;
+};
+
 &qusb_phy_0 {
 	vdd-supply = <&vreg_misc_0p925>;
 	vdda-pll-supply = <&vreg_misc_1p8>;
diff --git a/arch/arm64/boot/dts/qcom/ipq5424.dtsi b/arch/arm64/boot/dts/qcom/ipq5424.dtsi
index 876bf6a8b8ff..6635f9259bbb 100644
--- a/arch/arm64/boot/dts/qcom/ipq5424.dtsi
+++ b/arch/arm64/boot/dts/qcom/ipq5424.dtsi
@@ -968,15 +968,13 @@ pcie3: pcie@40000000 {
 				      "aux",
 				      "ahb";
 
-			phys = <&pcie3_phy>;
-			phy-names = "pciephy";
 			interconnects = <&gcc MASTER_ANOC_PCIE3 &gcc SLAVE_ANOC_PCIE3>,
 					<&gcc MASTER_CNOC_PCIE3 &gcc SLAVE_CNOC_PCIE3>;
 			interconnect-names = "pcie-mem", "cpu-pcie";
 
 			status = "disabled";
 
-			pcie@0 {
+			pcie3_port0: pcie@0 {
 				device_type = "pci";
 				reg = <0x0 0x0 0x0 0x0 0x0>;
 				bus-range = <0x01 0xff>;
@@ -984,6 +982,7 @@ pcie@0 {
 				#address-cells = <3>;
 				#size-cells = <2>;
 				ranges;
+				phys = <&pcie3_phy>;
 			};
 		};
 
@@ -1071,15 +1070,13 @@ pcie2: pcie@50000000 {
 				      "aux",
 				      "ahb";
 
-			phys = <&pcie2_phy>;
-			phy-names = "pciephy";
 			interconnects = <&gcc MASTER_ANOC_PCIE2 &gcc SLAVE_ANOC_PCIE2>,
 					<&gcc MASTER_CNOC_PCIE2 &gcc SLAVE_CNOC_PCIE2>;
 			interconnect-names = "pcie-mem", "cpu-pcie";
 
 			status = "disabled";
 
-			pcie@0 {
+			pcie2_port0: pcie@0 {
 				device_type = "pci";
 				reg = <0x0 0x0 0x0 0x0 0x0>;
 				bus-range = <0x01 0xff>;
@@ -1087,6 +1084,7 @@ pcie@0 {
 				#address-cells = <3>;
 				#size-cells = <2>;
 				ranges;
+				phys = <&pcie2_phy>;
 			};
 		};
 
@@ -1174,15 +1172,13 @@ pcie1: pcie@60000000 {
 				      "aux",
 				      "ahb";
 
-			phys = <&pcie1_phy>;
-			phy-names = "pciephy";
 			interconnects = <&gcc MASTER_ANOC_PCIE1	&gcc SLAVE_ANOC_PCIE1>,
 					<&gcc MASTER_CNOC_PCIE1	&gcc SLAVE_CNOC_PCIE1>;
 			interconnect-names = "pcie-mem", "cpu-pcie";
 
 			status = "disabled";
 
-			pcie@0 {
+			pcie1_port0: pcie@0 {
 				device_type = "pci";
 				reg = <0x0 0x0 0x0 0x0 0x0>;
 				bus-range = <0x01 0xff>;
@@ -1190,6 +1186,7 @@ pcie@0 {
 				#address-cells = <3>;
 				#size-cells = <2>;
 				ranges;
+				phys = <&pcie1_phy>;
 			};
 		};
 
@@ -1277,15 +1274,13 @@ pcie0: pcie@70000000 {
 				      "aux",
 				      "ahb";
 
-			phys = <&pcie0_phy>;
-			phy-names = "pciephy";
 			interconnects = <&gcc MASTER_ANOC_PCIE0 &gcc SLAVE_ANOC_PCIE0>,
 					<&gcc MASTER_CNOC_PCIE0	&gcc SLAVE_CNOC_PCIE0>;
 			interconnect-names = "pcie-mem", "cpu-pcie";
 
 			status = "disabled";
 
-			pcie@0 {
+			pcie0_port0: pcie@0 {
 				device_type = "pci";
 				reg = <0x0 0x0 0x0 0x0 0x0>;
 				bus-range = <0x01 0xff>;
@@ -1293,6 +1288,7 @@ pcie@0 {
 				#address-cells = <3>;
 				#size-cells = <2>;
 				ranges;
+				phys = <&pcie0_phy>;
 			};
 		};
 	};

-- 
2.34.1