Re: [PATCH v4 0/3] arm64: dts: freescale: add Toradex Aquila iMX95

[Frank . Li]

From: Frank Li <Frank.Li@xxxxxxx>


On Thu, 21 May 2026 19:11:03 +0200, Franz Schnyder wrote:
> This patch series adds support for the Toradex Aquila i.MX95 SoM and its
> currently available carrier boards: the Aquila Development Board and the
> Clover carrier board.
> 
> The module consists of an NXP i.MX95 family SoC, up to 16GB LPDDR5 RAM,
> up to 128GB of storage, a USB 3.2 OTG and USB 2.0 Host, a Gigabit
> Ethernet PHY, a 10 Gigabit Ethernet interface, an I2C EEPROM and
> Temperature Sensor, an RX8130 RTC, one Quad lane CSI interface, one Quad
> lane DSI or CSI interface, one LVDS interface (one or two channels), and
> some optional addons: DisplayPort (through a DSI-DP bridge), TPM 2.0,
> and a WiFi/BT module.
> 
> [...]

Applied, thanks!

[1/3] dt-bindings: arm: fsl: add Aquila iMX95
      commit: 4d0c0b7fcf59b1410fdeb18e2837d0c1e9ec14ba
[2/3] arm64: dts: freescale: add Aquila iMX95 support
      commit: 5daa24ec08a8f57a7f41a16cac140a69db813bba
[3/3] arm64: dts: freescale: imx95-aquila: Add Clover carrier board
      commit: 802cee9b535163f66fa635888c2922c760d5d526

Best regards,
-- 
Frank Li <Frank.Li@xxxxxxx>