Re: [PATCH v4 0/5] rockchip: add USB nodes for RK3528

[Heiko Stuebner]

On Fri, 29 May 2026 21:03:50 +0200, Heiko Stuebner wrote:
> This adds the USB nodes to RK3528 and therefore needs both the dwc3
> compatible [0], as well as the phy support [1] to be merged first.
> 
> changes in v4:
> - phy-supply not vbus-supply on armsom sige1
> - adapt e20c commit message explaining the hub
> - describe my changes to the original patches inside them
> 
> [...]

Applied, thanks!

[1/5] arm64: dts: rockchip: Add USB nodes for RK3528
      commit: 5f3ae9b12a6c523992a7216bbc4420ac33450b79
[2/5] arm64: dts: rockchip: Enable USB 2.0 ports on Radxa E20C
      commit: e897bcf81dd920bf80ace6d98ec6f9645c5b50f2
[3/5] arm64: dts: rockchip: Enable USB ports on Radxa ROCK 2A/2F
      commit: 4e55d52f5f3b333a9ff5103099df97291aaeb083
[4/5] arm64: dts: rockchip: Enable USB 2.0 ports on ArmSoM Sige1
      commit: b6b74087f90a201cfdd6da6a43e7b92dba8370e3
[5/5] arm64: dts: rockchip: Enable USB 2.0 ports on NanoPi Zero2
      commit: ff660109f4129a13bbdc31bc14ca233ebf0c9450

Best regards,
-- 
Heiko Stuebner <heiko@xxxxxxxxx>