[PATCH V1 2/2] arm64: dts: qcom: Enable SD card for Shikra EVK

[Monish Chunara]

Enable SD card for Shikra CQS, CQM and IQS EVK variants. Configure the
vmmc/vqmmc regulators and gpio-based card detection for each board
variant.

Signed-off-by: Monish Chunara <monish.chunara@xxxxxxxxxxxxxxxx>
---
 arch/arm64/boot/dts/qcom/shikra-cqm-evk.dts | 18 ++++++++++++++++++
 arch/arm64/boot/dts/qcom/shikra-cqs-evk.dts | 18 ++++++++++++++++++
 arch/arm64/boot/dts/qcom/shikra-iqs-evk.dts | 18 ++++++++++++++++++
 3 files changed, 54 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/shikra-cqm-evk.dts b/arch/arm64/boot/dts/qcom/shikra-cqm-evk.dts
index c2ed0396533a..53d8569a7c65 100644
--- a/arch/arm64/boot/dts/qcom/shikra-cqm-evk.dts
+++ b/arch/arm64/boot/dts/qcom/shikra-cqm-evk.dts
@@ -7,6 +7,7 @@
 
 #include "shikra-cqm-som.dtsi"
 #include "shikra-evk.dtsi"
+#include <dt-bindings/gpio/gpio.h>
 
 / {
 	model = "Qualcomm Technologies, Inc. Shikra CQM EVK";
@@ -15,6 +16,7 @@ / {
 
 	aliases {
 		mmc0 = &sdhc_1;
+		mmc1 = &sdhc_2; /* SDC2 SD card slot */
 		serial0 = &uart0;
 		serial1 = &uart8;
 	};
@@ -95,6 +97,22 @@ &sdhc_1 {
 	status = "okay";
 };
 
+&sdhc_2 {
+	vmmc-supply = <&pm4125_l21>;
+	vqmmc-supply = <&pm4125_l4>;
+
+	no-sdio;
+	no-mmc;
+
+	pinctrl-0 = <&sdc2_default &sdc2_card_det_n>;
+	pinctrl-1 = <&sdc2_sleep &sdc2_card_det_n>;
+	pinctrl-names = "default", "sleep";
+
+	cd-gpios = <&tlmm 89 GPIO_ACTIVE_LOW>;
+
+	status = "okay";
+};
+
 &uart8 {
 	status = "okay";
 
diff --git a/arch/arm64/boot/dts/qcom/shikra-cqs-evk.dts b/arch/arm64/boot/dts/qcom/shikra-cqs-evk.dts
index 3bfd0050064f..a461c5a03d63 100644
--- a/arch/arm64/boot/dts/qcom/shikra-cqs-evk.dts
+++ b/arch/arm64/boot/dts/qcom/shikra-cqs-evk.dts
@@ -7,6 +7,7 @@
 
 #include "shikra-cqm-som.dtsi"
 #include "shikra-evk.dtsi"
+#include <dt-bindings/gpio/gpio.h>
 
 / {
 	model = "Qualcomm Technologies, Inc. Shikra CQS EVK";
@@ -15,6 +16,7 @@ / {
 
 	aliases {
 		mmc0 = &sdhc_1;
+		mmc1 = &sdhc_2; /* SDC2 SD card slot */
 		serial0 = &uart0;
 		serial1 = &uart8;
 	};
@@ -95,6 +97,22 @@ &sdhc_1 {
 	status = "okay";
 };
 
+&sdhc_2 {
+	vmmc-supply = <&pm4125_l21>;
+	vqmmc-supply = <&pm4125_l4>;
+
+	no-sdio;
+	no-mmc;
+
+	pinctrl-0 = <&sdc2_default &sdc2_card_det_n>;
+	pinctrl-1 = <&sdc2_sleep &sdc2_card_det_n>;
+	pinctrl-names = "default", "sleep";
+
+	cd-gpios = <&tlmm 89 GPIO_ACTIVE_LOW>;
+
+	status = "okay";
+};
+
 &uart8 {
 	status = "okay";
 
diff --git a/arch/arm64/boot/dts/qcom/shikra-iqs-evk.dts b/arch/arm64/boot/dts/qcom/shikra-iqs-evk.dts
index 95bd797d009d..ede4dca3e7c0 100644
--- a/arch/arm64/boot/dts/qcom/shikra-iqs-evk.dts
+++ b/arch/arm64/boot/dts/qcom/shikra-iqs-evk.dts
@@ -7,6 +7,7 @@
 
 #include "shikra-iqs-som.dtsi"
 #include "shikra-evk.dtsi"
+#include <dt-bindings/gpio/gpio.h>
 
 / {
 	model = "Qualcomm Technologies, Inc. Shikra IQS EVK";
@@ -15,6 +16,7 @@ / {
 
 	aliases {
 		mmc0 = &sdhc_1;
+		mmc1 = &sdhc_2; /* SDC2 SD card slot */
 		serial0 = &uart0;
 		serial1 = &uart8;
 	};
@@ -103,6 +105,22 @@ &sdhc_1 {
 	status = "okay";
 };
 
+&sdhc_2 {
+	vmmc-supply = <&pm8150_l10>;
+	vqmmc-supply = <&pm8150_l2>;
+
+	no-sdio;
+	no-mmc;
+
+	pinctrl-0 = <&sdc2_default &sdc2_card_det_n>;
+	pinctrl-1 = <&sdc2_sleep &sdc2_card_det_n>;
+	pinctrl-names = "default", "sleep";
+
+	cd-gpios = <&tlmm 89 GPIO_ACTIVE_LOW>;
+
+	status = "okay";
+};
+
 &uart8 {
 	status = "okay";
 
-- 
2.34.1