Re: [PATCH 1/2] regulator: dt-bindings: qcom,sdm845-refgen-regulator: Document IPQ9650

[Krzysztof Kozlowski]

On 02/06/2026 11:21, Kathiravan Thirumoorthy wrote:
> IPQ9650 has two REFGEN blocks which provide reference current to the PCIe,
> USB and UNIPHY PHYs. Unlike other supported platforms, IPQ9650 requires the
> REFGEN clocks to be enabled explicitly.
> 
> Document the IPQ9650 compatible and the required clocks for it.
> 
> Signed-off-by: Kathiravan Thirumoorthy <kathiravan.thirumoorthy@xxxxxxxxxxxxxxxx>
> ---
>  .../regulator/qcom,sdm845-refgen-regulator.yaml     | 21 +++++++++++++++++++++
>  1 file changed, 21 insertions(+)
> 
> diff --git a/Documentation/devicetree/bindings/regulator/qcom,sdm845-refgen-regulator.yaml b/Documentation/devicetree/bindings/regulator/qcom,sdm845-refgen-regulator.yaml
> index 40f9223d4c27..2686569ca060 100644
> --- a/Documentation/devicetree/bindings/regulator/qcom,sdm845-refgen-regulator.yaml
> +++ b/Documentation/devicetree/bindings/regulator/qcom,sdm845-refgen-regulator.yaml
> @@ -16,6 +16,16 @@ description:
>  allOf:
>    - $ref: regulator.yaml#
>  
> +  - if:
> +      properties:
> +        compatible:
> +          contains:
> +            const: qcom,ipq9650-refgen-regulator
> +    then:
> +      required:
> +        - clocks
> +        - clock-names

Entire allOF block goes to the end, see example-schema.

> +
>  properties:
>    compatible:
>      oneOf:
> @@ -29,6 +39,7 @@ properties:
>  
>        - items:
>            - enum:
> +              - qcom,ipq9650-refgen-regulator
>                - qcom,qcs8300-refgen-regulator
>                - qcom,sa8775p-refgen-regulator
>                - qcom,sc7280-refgen-regulator
> @@ -45,6 +56,16 @@ properties:
>    reg:
>      maxItems: 1
>  
> +  clocks:
> +    items:
> +      - description: Core reference clock
> +      - description: AHB interface clock
> +
> +  clock-names:
> +    items:
> +      - const: core
> +      - const: hclk

You just added clocks to each variant, which is not explained in commit
msg. And it would be a separate commit anyway. Probably you wanted to
add proper constraints (:false).


Best regards,
Krzysztof