Re: [PATCH v3 2/3] dt-bindings: iio: light: isl29018: add isil,cover-comp-gain
From: Jonathan Cameron
Date: Fri Jun 05 2026 - 09:12:24 EST
On Thu, 4 Jun 2026 18:01:08 +0100
Conor Dooley <conor@xxxxxxxxxx> wrote:
> On Thu, Jun 04, 2026 at 12:06:16PM +0200, Herman van Hazendonk wrote:
> > Document the new optional property that seeds the ISL29018 calibration
> > scale factor at boot from firmware, allowing boards with tinted cover
> > glass to ship with correct luminance readings without a userspace helper.
> >
> > The value is a positive integer (minimum 1, maximum 65535) that is
> > multiplied with the raw lux reading. Userspace can still override it
> > at runtime through in_illuminance0_calibscale.
> >
> > Signed-off-by: Herman van Hazendonk <github.com@xxxxxxxxxx>
> > ---
> > .../devicetree/bindings/iio/light/isl29018.yaml | 13 +++++++++++++
> > 1 file changed, 13 insertions(+)
> >
> > diff --git a/Documentation/devicetree/bindings/iio/light/isl29018.yaml b/Documentation/devicetree/bindings/iio/light/isl29018.yaml
> > index 0ea278b07d1c..92ea2742bbd3 100644
> > --- a/Documentation/devicetree/bindings/iio/light/isl29018.yaml
> > +++ b/Documentation/devicetree/bindings/iio/light/isl29018.yaml
> > @@ -34,6 +34,19 @@ properties:
> > vcc-supply:
> > description: Regulator that provides power to the sensor
> >
> > + isil,cover-comp-gain:
> > + description: |
> > + Multiplier applied to the ambient-light reading at startup to
> > + compensate for optical loss in the board's cover glass. Boards
> > + that mount the sensor under a tinted or coated window typically
> > + need a value between a few and a few hundred.
Is it useful to support decimal points on these values? The userspace interface
does and you mention the 'right' answer might be only a few which means precision
at that range will be terrible - less of an issue if 100s!
Thanks
Jonathan
>
> > The value seeds
> > + in_illuminance0_calibscale, so it can still be retuned at
> > + runtime through sysfs.
>
> Delete this, driver implementation stuff isn't relevant to the
> devicetree binding.
>
> With that gone,
> Acked-by: Conor Dooley <conor.dooley@xxxxxxxxxxxxx>
>
> pw-bot: changes-requested
>
> Cheers,
> Conor.
>
> > + $ref: /schemas/types.yaml#/definitions/uint32
> > + minimum: 1
> > + maximum: 65535
> > + default: 1
> > +
> > required:
> > - compatible
> > - reg
> > --
> > 2.43.0
> >