[PATCH 2/8] Input: cap11xx - remove unused register macros
From: Jun Yan
Date: Sat Jun 06 2026 - 11:06:32 EST
Remove unused register address macros and unused definitions in
the cap11xx_reg_defaults array and cap11xx_volatile_reg.
This cleanup reduces code clutter and makes the driver easier to
maintain without affecting functionality.
Signed-off-by: Jun Yan <jerrysteve1101@xxxxxxxxx>
---
drivers/input/keyboard/cap11xx.c | 58 --------------------------------
1 file changed, 58 deletions(-)
diff --git a/drivers/input/keyboard/cap11xx.c b/drivers/input/keyboard/cap11xx.c
index 485d8ba97723..686174722204 100644
--- a/drivers/input/keyboard/cap11xx.c
+++ b/drivers/input/keyboard/cap11xx.c
@@ -20,53 +20,23 @@
#define CAP11XX_REG_MAIN_CONTROL_GAIN_SHIFT (6)
#define CAP11XX_REG_MAIN_CONTROL_GAIN_MASK (0xc0)
#define CAP11XX_REG_MAIN_CONTROL_DLSEEP BIT(4)
-#define CAP11XX_REG_GENERAL_STATUS 0x02
#define CAP11XX_REG_SENSOR_INPUT 0x03
-#define CAP11XX_REG_NOISE_FLAG_STATUS 0x0a
-#define CAP11XX_REG_SENOR_DELTA(X) (0x10 + (X))
#define CAP11XX_REG_SENSITIVITY_CONTROL 0x1f
#define CAP11XX_REG_SENSITIVITY_CONTROL_DELTA_SENSE_MASK 0x70
-#define CAP11XX_REG_CONFIG 0x20
-#define CAP11XX_REG_SENSOR_ENABLE 0x21
-#define CAP11XX_REG_SENSOR_CONFIG 0x22
-#define CAP11XX_REG_SENSOR_CONFIG2 0x23
-#define CAP11XX_REG_SAMPLING_CONFIG 0x24
-#define CAP11XX_REG_CALIBRATION 0x26
-#define CAP11XX_REG_INT_ENABLE 0x27
#define CAP11XX_REG_REPEAT_RATE 0x28
#define CAP11XX_REG_SIGNAL_GUARD_ENABLE 0x29
-#define CAP11XX_REG_MT_CONFIG 0x2a
-#define CAP11XX_REG_MT_PATTERN_CONFIG 0x2b
-#define CAP11XX_REG_MT_PATTERN 0x2d
-#define CAP11XX_REG_RECALIB_CONFIG 0x2f
#define CAP11XX_REG_SENSOR_THRESH(X) (0x30 + (X))
-#define CAP11XX_REG_SENSOR_NOISE_THRESH 0x38
-#define CAP11XX_REG_STANDBY_CHANNEL 0x40
-#define CAP11XX_REG_STANDBY_CONFIG 0x41
-#define CAP11XX_REG_STANDBY_SENSITIVITY 0x42
-#define CAP11XX_REG_STANDBY_THRESH 0x43
#define CAP11XX_REG_CONFIG2 0x44
#define CAP11XX_REG_CONFIG2_ALT_POL BIT(6)
-#define CAP11XX_REG_SENSOR_BASE_CNT(X) (0x50 + (X))
-#define CAP11XX_REG_LED_POLARITY 0x73
#define CAP11XX_REG_LED_OUTPUT_CONTROL 0x74
#define CAP11XX_REG_CALIB_SENSITIVITY_CONFIG 0x80
#define CAP11XX_REG_CALIB_SENSITIVITY_CONFIG2 0x81
-
-#define CAP11XX_REG_LED_DUTY_CYCLE_1 0x90
-#define CAP11XX_REG_LED_DUTY_CYCLE_2 0x91
-#define CAP11XX_REG_LED_DUTY_CYCLE_3 0x92
#define CAP11XX_REG_LED_DUTY_CYCLE_4 0x93
-#define CAP11XX_REG_LED_DUTY_MIN_MASK (0x0f)
-#define CAP11XX_REG_LED_DUTY_MIN_MASK_SHIFT (0)
#define CAP11XX_REG_LED_DUTY_MAX_MASK (0xf0)
#define CAP11XX_REG_LED_DUTY_MAX_MASK_SHIFT (4)
#define CAP11XX_REG_LED_DUTY_MAX_VALUE (15)
-#define CAP11XX_REG_SENSOR_CALIB (0xb1 + (X))
-#define CAP11XX_REG_SENSOR_CALIB_LSB1 0xb9
-#define CAP11XX_REG_SENSOR_CALIB_LSB2 0xba
#define CAP11XX_REG_PRODUCT_ID 0xfd
#define CAP11XX_REG_MANUFACTURER_ID 0xfe
#define CAP11XX_REG_REVISION 0xff
@@ -111,37 +81,15 @@ struct cap11xx_hw_model {
static const struct reg_default cap11xx_reg_defaults[] = {
{ CAP11XX_REG_MAIN_CONTROL, 0x00 },
- { CAP11XX_REG_GENERAL_STATUS, 0x00 },
- { CAP11XX_REG_SENSOR_INPUT, 0x00 },
- { CAP11XX_REG_NOISE_FLAG_STATUS, 0x00 },
{ CAP11XX_REG_SENSITIVITY_CONTROL, 0x2f },
- { CAP11XX_REG_CONFIG, 0x20 },
- { CAP11XX_REG_SENSOR_ENABLE, 0x3f },
- { CAP11XX_REG_SENSOR_CONFIG, 0xa4 },
- { CAP11XX_REG_SENSOR_CONFIG2, 0x07 },
- { CAP11XX_REG_SAMPLING_CONFIG, 0x39 },
- { CAP11XX_REG_CALIBRATION, 0x00 },
- { CAP11XX_REG_INT_ENABLE, 0x3f },
{ CAP11XX_REG_REPEAT_RATE, 0x3f },
- { CAP11XX_REG_MT_CONFIG, 0x80 },
- { CAP11XX_REG_MT_PATTERN_CONFIG, 0x00 },
- { CAP11XX_REG_MT_PATTERN, 0x3f },
- { CAP11XX_REG_RECALIB_CONFIG, 0x8a },
{ CAP11XX_REG_SENSOR_THRESH(0), 0x40 },
{ CAP11XX_REG_SENSOR_THRESH(1), 0x40 },
{ CAP11XX_REG_SENSOR_THRESH(2), 0x40 },
{ CAP11XX_REG_SENSOR_THRESH(3), 0x40 },
{ CAP11XX_REG_SENSOR_THRESH(4), 0x40 },
{ CAP11XX_REG_SENSOR_THRESH(5), 0x40 },
- { CAP11XX_REG_SENSOR_NOISE_THRESH, 0x01 },
- { CAP11XX_REG_STANDBY_CHANNEL, 0x00 },
- { CAP11XX_REG_STANDBY_CONFIG, 0x39 },
- { CAP11XX_REG_STANDBY_SENSITIVITY, 0x02 },
- { CAP11XX_REG_STANDBY_THRESH, 0x40 },
{ CAP11XX_REG_CONFIG2, 0x40 },
- { CAP11XX_REG_LED_POLARITY, 0x00 },
- { CAP11XX_REG_SENSOR_CALIB_LSB1, 0x00 },
- { CAP11XX_REG_SENSOR_CALIB_LSB2, 0x00 },
};
static bool cap11xx_volatile_reg(struct device *dev, unsigned int reg)
@@ -149,12 +97,6 @@ static bool cap11xx_volatile_reg(struct device *dev, unsigned int reg)
switch (reg) {
case CAP11XX_REG_MAIN_CONTROL:
case CAP11XX_REG_SENSOR_INPUT:
- case CAP11XX_REG_SENOR_DELTA(0):
- case CAP11XX_REG_SENOR_DELTA(1):
- case CAP11XX_REG_SENOR_DELTA(2):
- case CAP11XX_REG_SENOR_DELTA(3):
- case CAP11XX_REG_SENOR_DELTA(4):
- case CAP11XX_REG_SENOR_DELTA(5):
return true;
}
--
2.54.0